Authorization using ACLs

Apache Kafka® ships with a pluggable, out-of-the-box Authorizer implementation that uses Apache ZooKeeper™ to store all the ACLs. It is important to set ACLs because otherwise access to resources is limited to super users when an Authorizer is configured. The default behavior is that if a resource has no associated ACLs, then no one is allowed to access the resource, except super users.

See also

For an example that shows this in action, see the Confluent Platform demo. Refer to the demo’s docker-compose.yml for a configuration reference.

ACL concepts

Access Control Lists (ACLs) provide important authorization controls for your enterprise’s Apache Kafka® cluster data. Before attempting to create and use ACLs, familiarize yourself with the concepts described in this section; your understanding of them is key to your success when creating and using ACLs to manage access to components and cluster data.


An authorizer is a server plugin used by Apache Kafka® to authorize operations. More specifically, an authorizer controls whether or not to authorize an operation based on the principal and the resource being accessed. The default Kafka authorizer implementation is AclAuthorizer (, which was introduced in Apache Kafka® 2.4/Confluent Platform 5.4.0. Prior to that, the authorizer was named SimpleAclAuthorizer (

To enable and use the AclAuthorizer, set its full class name for your broker configuration in


While this topic covers AclAuthorizer only, be aware that Confluent also provides the Confluent LDAP Authorizer to allow for group and user-principal-based authorization, and the Confluent Server Authorizer to allow for proprietary LDAP group-based and role-based access control (RBAC), as well as centralized ACLs. By default, Confluent Server Authorizer supports ZooKeeper-based ACLs.

AclAuthorizer stores Kafka ACL information in ZooKeeper. However, it does not control access to ZooKeeper nodes. Rather, ZooKeeper has its own ACL security to control access to ZooKeeper nodes. ZooKeeper ACLs control which principal (for example, the broker principal) can update ZooKeeper nodes containing Kafka cluster metadata (such as in-sync replicas, topic configuration, and Kafka ACLs) and nodes used in inter-broker coordination (such as controller election, broker joining, and topic deletion).

Kafka ACLs control which principals can perform operations on Kafka resources. Kafka brokers can use ZooKeeper ACLs by enabling ZooKeeper Security (zookeeper.set.acl=true) for the broker configuration.


A principal is an entity that can be authenticated by the authorizer. Clients of a Kafka broker identify themselves as a particular principal using various security protocols. The way a principal is identified depends upon which security protocol it uses to connect to the Kafka broker (for example: mTLS, SASL/GSSAPI, or SASL/PLAIN). Authentication depends on the security protocol in place (such as SASL, TLS/SSL) to recognize a principal within a Kafka broker.

The following examples show the principal name format based on the security protocol being used:

  • When a client connects to a Kafka broker using the SSL security protocol, the principal name will be in the form of the SSL certificate subject name:,OU=TEST,O=Sales,L=PaloAlto,ST=Ca,C=US. Note that there are no spaces after the comma between subject parts.
  • When a client connects to a Kafka broker using the SASL security protocol with GSSAPI (Kerberos) mechanism, the principal will be in the Kerberos principal format: For more detail, refer to Kerberos Principal Names.
  • When a client connects to a Kafka broker using the SASL security protocol with a PLAIN or SCRAM mechanism, the principal will be a simple text string, such as alice, admin, or billing_etl_job_03.

The AclAuthorizer only supports individual users and always interprets the principal as the user name. However, other authorizers, such as the LDAP Authorizer, support groups. Therefore, when specifying the principal you must include the type using the prefix User: or Group: (case-sensitive). Some examples: User:admin, Group:developers, or,OU=TEST,O=Sales,L=PaloAlto,ST=Ca,C=US.

In the following ACL, the plain text principals (User:alice, User:fred) are identified as Kafka users who are allowed to run specific operations (read, write) from either of the specified hosts (host-1, host-2) on a specific resource (topic):

kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf \
 --add --allow-principal User:alice --allow-principal User:fred --allow-host host-1 \
 --allow-host host-2 --operation read --operation write --topic finance-topic

It’s a best practice to create one principal per application and give each principal only the ACLs it requires and no more. For example: if Alice is writing three programs that access different topics to automate a billing workflow, she could create three principals: billing_etl_job_01, billing_etl_job_02, and billing_etl_job_03. She would then grant each principal permissions on only the exact topics it needs, and run each program with its specific principal.

Alternatively, she could take a middle-ground approach and create a single billing_etl_jobs principal with access to all of the topics that the billing programs require, and simply run all three with that principal.

Alice should not run these programs as her own principal because she would presumably have broader permissions than the jobs actually need. Running with one principal per application also helps significantly with debugging and auditing because it’s clearer which application is performing each operation.

Wildcard principals

You can create ACLs for all principals using a wildcard in the principal User:*. ACLs that use a wildcard as the user principal are applied to all users. For example, the following command grants everyone access to the topic testTopic:

kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf --add \
--allow-principal User:* --operation All --topic testTopic

If you use an authorizer that supports group principals, such as Confluent Server Authorizer, you can also create ACLs for all group principals using the principal Group:*. ACLs that use the wildcard as the principal are applied to all users who belong to at least one group.

You cannot create ACLs that use the wildcard for super users. For example, while the following configuration makes the user principal User:* a super user, it does not make every user a super user because no wildcard match is performed:



If you are using Confluent Server Authorizer, note that role bindings do not support wildcard matching. Hence, assigning a role to User:* does not grant the role to every user. Refer to Authorization using Role-Based Access Control for more details about RBAC principals.

SASL/Kerberos principals

If you use Kerberos, your Kafka principal is based on your Kerberos principal (for example, kafka/ By default, Kafka only uses the primary name of the Kerberos principal, which is the name that appears before the backslash (/). Hence, if the broker Kerberos principal is kafka/, then the principal used by the Kafka authorizer is kafka. The hostname is different for every broker. This parsing is automatically implemented using the default value of

For details about Kerberos principal names and configurations, refer to Kerberos Principals.


If you are using your organization’s Kerberos or Active Directory server, ask your Kerberos administrator for a principal for each Kafka broker in your cluster and for every operating system user that will access Kafka with Kerberos authentication (using clients and tools). Server principals are of type NT_HOSTBASED_SERVICE.

Each broker must be able to communicate with all of the other brokers for replication, and when it acts as the controller. You must add the broker principal as a super user, otherwise Kafka will not work.

Configuration options for customizing SASL/Kerberos user name

By default, the Kafka principal will be the primary part of the Kerberos principal. You can change this behavior by specifying a customized rule for in The format of takes the form a list where each rule works in the same way it does in auth_to_local in the Kerberos configuration file (krb5.conf). These rules support the use of lowercase/uppercase to force the translated result to be all lowercase (/L) or all uppercase (/U). This enforcement is achieved by adding a /L or /U to the end of the rule. Each rule starts with RULE: and contains an expression. The following examples show the format and syntax:


This rule translates user@MYDOMAIN.COM to user while keeping the default rule in place:[1:$1@$0](.*@MYDOMAIN.COM)s/@.*//,DEFAULT

TLS/SSL principal user names

As mentioned earlier, principals are recognized based on how users authenticate to the broker, which in turn depends upon the security protocol in use. To use TLS/SSL principals, you must understand how to accurately represent user names.

By default, the name of the principal identified by a TLS/SSL certificate is the DN (X.500 Distinguished Name) of that certificate (also known as the Subject), which uses the form CN=writeuser,OU=Unknown,O=Unknown,L=Unknown,ST=Unknown,C=Unknown. You can use ssl.principal.mapping.rules to translate the DN to a more manageable principal name. Refer to Configuration options for customizing TLS/SSL user name for details.

In the event that SSL is enabled but client authentication is not configured, clients will connect anonymously using the SSL port and will appear to the server with the user name ANONYMOUS. Such a configuration provides encryption and server authentication, but clients connect anonymously. The other case in which the server will see the ANONYMOUS user is if the PLAINTEXT security protocol is being used. By granting read/write permission to the ANONYMOUS user, you are allowing anyone to access the brokers without authentication. As such, you should not grant access to ANONYMOUS users unless the intention is to give everyone the permission.

Configuration options for customizing TLS/SSL user name

By default, the SSL user name is in the form CN=writeuser,OU=Unknown,O=Unknown,L=Unknown,ST=Unknown,C=Unknown. This configuration allows a list of rules for mapping the X.500 distinguished name (DN) to short name. The rules are evaluated in order and the first rule that matches a DN is used to map it to a short name. Any later rules in the list are ignored.

The format of ssl.principal.mapping.rules is a list where each rule starts with “RULE:” and contains an expression using the formats below. The default rule returns string representation of the X.500 certificate DN. If the DN matches the pattern, then the replacement command is run over the name. This also supports lowercase/uppercase options, to force the translated result to be all lower/uppercase case. This is done by adding an /L or /U to the end of the rule:


Example ssl.principal.mapping.rules values are:


These rules translate the DN as follows: CN=serviceuser,OU=ServiceUsers,O=Unknown,L=Unknown,ST=Unknown,C=Unknown to serviceuser and CN=adminUser,OU=Admin,O=Unknown,L=Unknown,ST=Unknown,C=Unknown to adminuser@admin.


An operation is an action performed on a resource. In addition to identifying the resources to which users or groups have access, ACLs also identify the operations those users or groups are authorized to perform. For each resource, an operation is mapped to one or more Kafka APIs or request types applicable for that resource. For example, a READ operation for the Topic resource is mapped to Fetch, OffsetCommit, and TxnOffsetCommit. Or, a WRITE operation for the Topic resource is mapped to Produce and AddPartitionsToTxn.

The following tables identify the valid operations available for each resource type in Confluent Platform, and describe the relationship between operations, resources, and APIs:

Operations available for the Cluster resource type:

Operation Resource API
ALTER Cluster AlterReplicaLogDirs
ALTER Cluster CreateAcls
ALTER Cluster DeleteAcls
ALTER_CONFIGS Cluster AlterConfigs
CLUSTER_ACTION Cluster Fetch (for replication only)
CLUSTER_ACTION Cluster LeaderAndIsr
CLUSTER_ACTION Cluster OffsetForLeaderEpoch
CLUSTER_ACTION Cluster StopReplica
CLUSTER_ACTION Cluster UpdateMetadata
CLUSTER_ACTION Cluster ControlledShutdown
CLUSTER_ACTION Cluster WriteTxnMarkers
CREATE Cluster CreateTopics
CREATE Cluster Metadata if auto.create.topics.enable
DESCRIBE Cluster DescribeAcls
DESCRIBE Cluster DescribeLogDirs
DESCRIBE Cluster ListGroups
DESCRIBE_CONFIGS Cluster DescribeConfigs
IDEMPOTENT_WRITE Cluster InitProducerId

Operations available for the Topic resource type:

Operation Resource API
ALTER Topic CreatePartitions
ALTER_CONFIGS Topic AlterConfigs
CREATE Topic Metadata if auto.create.topics.enable
CREATE Topic CreateTopics
DELETE Topic DeleteRecords
DELETE Topic DeleteTopics
DESCRIBE Topic ListOffsets
DESCRIBE Topic Metadata
DESCRIBE Topic OffsetFetch
DESCRIBE Topic OffsetForLeaderEpoch
DESCRIBE_CONFIGS Topic DescribeConfigs
READ Topic Fetch
READ Topic OffsetCommit
READ Topic TxnOffsetCommit
WRITE Topic Produce
WRITE Topic AddPartitionsToTxn

Operations available for the Group resource type:

Operation Resource API
DELETE Group DeleteGroups
DESCRIBE Group DescribeGroup
DESCRIBE Group FindCoordinator
DESCRIBE Group ListGroups
READ Group AddOffsetsToTxn
READ Group Heartbeat
READ Group JoinGroup
READ Group LeaveGroup
READ Group OffsetCommit
READ Group OffsetFetch
READ Group SyncGroup
READ Group TxnOffsetCommit

Operations available for the Delegation Token resource type:

Operation Resource API
DESCRIBE DelegationToken DescribeTokens

Operations available for the Transactional ID resource type:

Operation Resource API
DESCRIBE TransactionalId FindCoordinator
WRITE TransactionalId Produce
WRITE TransactionalId AddPartitionsToTxn
WRITE TransactionalId AddOffsetsToTxn
WRITE TransactionalId EndTxn
WRITE TransactionalId InitProducerId
WRITE TransactionalId TxnOffsetCommit

The operations in the tables above are both for clients (producers, consumers, admin) and inter-broker operations of a cluster. In a secure cluster, both client requests and inter-broker operations require authorization. The inter-broker operations are split into two classes: cluster and topic. Cluster operations refer to operations necessary for the management of the cluster, like updating broker and partition metadata, changing the leader and the set of in-sync replicas of a partition, and triggering a controlled shutdown.

Because of the way replication of topic partitions works internally, the broker principal must be a super user so that the broker can replicate topics properly from leader to follower.

Producers and consumers need to be authorized to perform operations on topics, but they should be configured with different principals compared to the brokers. The main operations that producers require authorization to execute are WRITE and READ. Admin users can execute command line tools and require authorization. Operations that an admin user might need authorization for are DELETE, CREATE, and ALTER. You can use wildcards (*) for producers and consumers so that you only have to set it once.

Implicitly-derived operations

Certain operations provide additional implicit operation access to users.

When granted READ, WRITE, or DELETE, users implicitly derive the DESCRIBE operation.

When granted ALTER_CONFIGS, users implicitly derive the DESCRIBE_CONFIGS operation.


Users access and perform operations on specific Kafka and Confluent Platform resources. A resource can be a cluster, group, Apache Kafka® topic, transactional ID, or Delegation token. ACLs specify which users can access a specified resource, and the operations they are permitted to run against that resource. Within Kafka resources are:

The Kafka cluster. Users who wish to run operations that impact the whole cluster, such as a controlled shutdown or create a new topic, must be assigned privileges on the cluster resource.
Delegation Token
Delegation tokens are shared secrets between Apache Kafka® brokers and clients. Authentication based on delegation tokens is a lightweight authentication mechanism that you can use to complement existing SASL/SSL methods. Refer to Authentication using Delegation Tokens for more details.
Groups in the brokers. All protocol calls that work with groups, such as joining a group, must have corresponding privileges with the group in the subject. Group ( can mean Consumer Group, Stream Group (, Connect Worker Group, or any other group that uses the Consumer Group protocol, like Schema Registry cluster.
All Kafka messages are organized into topics (and partitions). To access a topic, you must have a corresponding operation (such as READ or WRITE) defined in an ACL.
Transactional ID

A transactional ID ( identifies a single producer instance across application restarts and provides a way to ensure a single writer; this is necessary for exactly-once semantics (EOS). There can only be one producer active at any time for each When a producer starts up, it first checks whether or not there is a pending transaction by a producer with its own If there is, then it must wait until the transaction has finished (abort or commit). This guarantees that the producer always starts from a consistent state.

When used, a producer must be able to manipulate transactional IDs and have all the permissions set. For example, the following ACL allows all users in the system access to an EOS producer:

kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf \
   --add --transactional-id * --allow-principal User:* --operation write

For additional information about the role of transactional IDs, refer to Transactions in Apache Kafka.

The Operations available to a user depend on the resources to which the user has been granted access. All resources have a resource identifier, which uniquely identifies them. For example, for the resource type topic, the resource identity is the topic name, and for the resource type group, the resource identity is the group name.

You can view the ACLs for a specific resource using the --list option. For example, to view all ACLs for the topic test-topic run the following command:

bin/kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf \
   --list --topic test-topic

Prefixed ACLs

You can specify ACL resources using either a LITERAL value (default), PREFIXED pattern type, or wildcard (*), which allows all.

If you identify the resource using LITERAL, Kafka will try to match the full resource name (for example, topic or consumer group) with the resource specified in the ACL. In some cases you may want to use an asterisk (*) to specify all resources.

If you identify the resource using PREFIXED, Kafka will try to match the prefix of the resource name with the resource specified in ACL.

For example, you can add an ACL for user User:kafka/ to produce to any topic with a name that uses the prefix Test-. You can do this by running the following command:

bin/kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf \
   --add --allow-principal User:kafka/ \
   --producer --topic Test- --resource-pattern-type prefixed

In the following example, a program called “BillingPublisher”, which was built using the Kafka Java SDK, requires an ACL that allows it to write only to topics that use the prefix billing-:

bin/kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf --add \
--allow-principal User:BillingPublisher \
--allow-host --producer --topic billing- --resource-pattern-type prefixed

Be aware that you cannot use the PREFIXED resource pattern type for a topic while granting access to all groups * (wildcard) within a single command. Instead, split permissions across different commands. For example, grant READ and DESCRIBE access to the user for the prefixed topics:

bin/kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf --add \
--allow-principal User:username --operation Read --operation Describe --topic topicprefix --resource-pattern-type prefixed

Then grant user READ access to all groups:

bin/kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf --add \
--allow-principal User:username --operation Read --group '*'

Super Users

By default, if a resource has no associated ACLs, then no one is allowed to access that resource except super users. If you want to change that behavior, you can include the following in

You can add super users in (note that the delimiter is a semicolon because SSL user names may contain a comma) as shown here:


ACLs and Monitoring Interceptors

Confluent Monitoring Interceptors produce to the _confluent-monitoring topic by default. You can configure the _confluent-monitoring topic using the confluent.monitoring.interceptor.topic attribute. Users who must access this topic require WRITE and DESCRIBE ACL access. You can provide access either individually for each client principal that will use interceptors, or using a wildcard entry for all clients. The following example shows an ACL that grants a principal access to the _confluent-monitoring topic:

kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf \
--add --topic _confluent-monitoring --allow-principal User:username --operation write --operation describe

The Confluent Control Center principal requires READ, DESCRIBE, and CREATE access to the _confluent-monitoring topic. Use the control-center-set-acls script to set the appropriate permissions for the Confluent Control Center principal to access this topic. Refer to Control Center UI Authentication for details.

Using ACLs

The examples in the following sections use bin/kafka-acls (the Kafka Authorization management CLI) to add, remove or list ACLs. For detailed information on the supported options, run bin/kafka-acls --help. Note that ACLs are stored in ZooKeeper and they are propagated to the brokers asynchronously so there may be a delay before the change takes effect even after the command returns.

You can also use the Kafka AdminClient API to manage ACLs.


  • If you are using transactions (--transactional-id), the IdempotentWrite ACL is implied.
  • If you are not using transactions, you can use the --idempotent option to enable the IdempotentWrite ACL.

Some of the most common ACL use cases:

  • create a topic, the principal of the client will require the CREATE and DESCRIBE operations on the Topic or Cluster resource.
  • produce to a topic, the principal of the producer will require the WRITE operation on the Topic resource.
  • consume from a topic, the principal of the consumer will require the READ operation on the Topic and Group resources.

Note that to be able to create, produce, and consume, the servers need to be configured with the appropriate ACLs. The servers need authorization to update metadata (CLUSTER_ACTION) and to read from a topic (READ) for replication purposes.

ACL format

Kafka ACLs are defined in the general format of “Principal P is [Allowed/Denied] Operation O From Host H On Resources matching ResourcePattern RP”.

  • Wildcards apply for any resource.

  • You can give topic and group wildcard access to users who have permission to access all topics and groups (for example, admin users). If you use this method, you don’t have to create a separate rule for each topic and group for the user. For example, you can use this command to grant wildcard access to Alice:

    kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf --add --allow-principal \
    User:Alice --operation All --topic '*' --group '*'

Adding ACLs

Suppose you want to add an ACL where: principals User:CN=Jane Smith,OU=Sales,O=Unknown,L=Unknown,ST=Unknown,C=Unknown and User:CN=Bob Thomas,OU=Sales,O=Unknown,L=Unknown,ST=NY,C=Unknown are allowed to perform read and write operations on the topic test-topic from IP and IP You can do that by executing the following:

bin/kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf --add \
 --allow-principal "User:CN=Bob Thomas,OU=Sales,O=Unknown,L=Unknown,ST=NY,C=Unknown" \
 --allow-principal "User:CN=Jane Smith,OU=Sales,O=Unknown,L=Unknown,ST=Unknown,C=Unknown" \
 --allow-host --allow-host \
 --operation Read --operation Write --topic test-topic

By default all principals that don’t have an explicit ACL allowing an operation to access a resource are denied. In rare cases where an ACL that allows access to all but some principal is desired, you can use the --deny-principal and --deny-host options. For example, use the following command to allow all users to Read from test-topic but only deny User:kafka/ from IP

bin/kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf --add \
 --allow-principal User:'*' --allow-host '*' --deny-principal User:kafka/ --deny-host \
 --operation Read --topic test-topic

Kafka does not support certificate revocation lists (CRLs), so you cannot revoke a client’s certificate. Hence, the only alternative is to disable the user’s access using an ACL:

kafka-acls --bootstrap-server localhost:9092 --add --deny-principal "User:CN=Bob,O=Sales" --cluster --topic '*'

Note that --allow-host and deny-host only support IP addresses (hostnames are not supported). Also note that IPv6 addresses are supported, and that you can use them in ACLs.

The examples above add ACLs to a topic by specifying --topic [topic-name] as the resource pattern option. Similarly, one can add ACLs to a cluster by specifying --cluster and to a group by specifying --group [group-name]. In the event that you want to grant permission to all groups, you may do so by specifying --group='*' as shown in the following command:

bin/kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf --add \
--allow-principal User:'*' --operation read --topic test --group '*'

You can add ACLs on prefixed resource patterns. For example, you can add an ACL that enables users in the org unit (OU) ServiceUsers (this org is using TLS/SSL authentication) to produce to any topic whose name starts with Test-. You can do that by executing the CLI with the following options:

bin/kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf --add --allow-principal \
  User:CN=serviceuser,OU=ServiceUsers,O=Unknown,L=Unknown,ST=Unknown,C=Unknown --producer --topic Test- --resource-pattern-type prefixed

Note that --resource-pattern-type defaults to literal, which only affects resources with the exact same name or, in the case of the wildcard resource name '*', a resource with any name.

Removing ACLs

Removing ACLs is similar adding them, except the --remove option should be specified instead of --add. To remove the ACLs added in the first example above you can execute the following:

bin/kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf --remove \
 --allow-principal "User:CN=Bob Thomas,OU=Sales,O=Unknown,L=Unknown,ST=NY,C=Unknown" \
 --allow-principal "User:CN=Jane Smith,OU=Sales,O=Unknown,L=Unknown,ST=Unknown,C=Unknown" \
 --allow-host --allow-host \
 --operation Read --operation Write --topic test-topic

If you want to remove the ACL added to the prefixed resource pattern in the example, run the CLI with following options:

bin/kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf --remove \
  --allow-principal User:CN=Jane Smith,OU=Sales,O=Unknown,L=Unknown,ST=Unknown,C=Unknown \
  --producer --topic Test- --resource-pattern-type Prefixed

Listing ACLs

You can list the ACLs for a given resource by specifying the --list option and the resource. For example, to list all ACLs for test-topic execute the following:

bin/kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf \
 --list --topic test-topic

However, this will only return the ACLs that have been added to this exact resource pattern. Other ACLs can exist that affect access to the topic–for example, any ACLs on the topic wildcard '*', or any ACLs on prefixed resource patterns. You can explicitly query ACLs on the wildcard resource pattern:

bin/kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf --list --topic '*'

It is not necessarily possible to explicitly query for ACLs on prefixed resource patterns that match Test-topic because the name of such patterns may not be known. You can list all ACLs affecting Test-topic by using --resource-pattern-type match. For example:

bin/kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf --list --topic Test-topic --resource-pattern-type match

This command will list ACLs on all matching literal, wildcard, and prefixed resource patterns.

To view an ACL for an internal topic:

kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf --list --topic __consumer_offsets

Adding or Removing a Principal as Producer or Consumer

The most common use cases for ACL management are adding/removing a principal as a producer or consumer. To add user “Jane Doe” (Kerberos platform as a producer of test-topic you can execute the following:

bin/kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf \
 --add --allow-principal \
 --producer --topic test-topic

To add as a consumer of test-topic with group Group-1, you can specify the --consumer and --group options:

bin/kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf \
 --add --allow-principal \
 --consumer --topic test-topic --group Group-1

To remove a principal from a producer or consumer role, you can specify the --remove option.

Enabling Authorization for Idempotent and Transactional APIs

Producers may be configured with enable.idempotence=true to ensure that exactly one copy of each message is written to the stream. The principal used by idempotent producers must be authorized to perform IdempotentWrite on the cluster.

To enable Bob to produce messages using an idempotent producer, you can execute the command:

bin/kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf \
 --add --allow-principal User:Bob \
 --producer --topic test-topic --idempotent

Producers may also be configured with a non-empty to enable transactional delivery with reliability semantics that span multiple producer sessions. The principal used by transactional producers must be authorized for Describe and Write operations on the configured

To enable Alice to produce messages using a transactional producer with, run the command:

bin/kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf \
 --add --allow-principal User:Alice \
 --producer --topic test-topic --transactional-id test-txn

Note that idempotent write access is automatically granted for transactional producers configured with ACLs for the configured transactional ID.

Creating Non-Super User ACL Administrators

In the event that you want a non-super user to be able to create or delete ACLs, but not grant them the super user role, a current super user can grant another user (referred to here as the ACL administrator) the ALTER --cluster access control entry (ACE), which binds an operation, in this case, “alter” to a resource, “cluster”. After granting the ACL Administrator the ALTER --cluster ACE, that user can create and delete ACLs for a given resource in a cluster.

kafka-acls --bootstrap-server localhost:9092 --command-config adminclient-configs.conf \
--add --allow-principal User:notSuper \
--operation  ALTER --cluster


  • If you wish to assign ALTER --cluster to a group, then Group:groupName is also valid; however, the Authorizer you are using must be able to handle/allow groups.
  • Exercise caution when assigning ALTER --cluster to users or groups because such users will be able to create and delete ACLs to control their own access to resources as well.

Authorization in the REST Proxy and Schema Registry

You may use Kafka ACLs to enforce authorization in the REST Proxy and Schema Registry. These require Confluent security plugins.


It’s possible to run with authorizer logs in DEBUG mode by making some changes to the file. If you’re using the default file, change the following line to DEBUG mode instead of WARN:

log4j.logger.kafka.authorizer.logger=WARN, authorizerAppender

The file is located in the Kafka config directory at /etc/kafka/ In the event that you’re using an earlier version of Confluent Platform, or if you’re using your own file, you’ll need to add the following lines to the configuration:

log4j.appender.authorizerAppender.layout.ConversionPattern=[%d] %p %m (%c)%n

log4j.logger.kafka.authorizer.logger=DEBUG, authorizerAppender

You’ll need to restart the broker before it will take effect. This will log every request being authorized and its associated user name. The log is located in $kafka_logs_dir/kafka-authorizer.log. The location of the logs depends on the packaging format - kafka_logs_dir will be in /var/log/kafka in rpm/debian and $base_dir/logs in the archive format.