JDBC Sink Connector for Confluent Platform

The Kafka Connect JDBC Sink connector allows you to export data from Apache Kafka® topics to any relational database with a JDBC driver. This connector can support a wide variety of databases. The connector polls data from Kafka to write to the database based on the topics subscription. It is possible to achieve idempotent writes with upserts. Auto-creation of tables and limited auto-evolution is also supported.

Features

The JDBC Sink connector includes the following features:

At least once delivery

This connector guarantees that records are delivered at least once from the Kafka topic.

Dead Letter Queue

This connector supports the Dead Letter Queue (DLQ) functionality. Users using this feature should note the following:

  • The max.retries configuration property determines how many times the JDBC Sink connector will try to insert the data before it unwraps the batch and sends the errant record to DLQ. Note that this retry only happens if it is an SQLException. If it is an exception while creating or altering tables, the connector will not retry but will skip to unwrap the batch and send errant records to DLQ.
  • The connection.attempts property determines how many times the connector will attempt to connect to the database before the task is killed–that is, no records are sent to the DLQ.

For more information about accessing and using the DLQ, see Confluent Platform Dead Letter Queue.

Multiple tasks

The JDBC Sink connector supports running one or more tasks. You can specify the number of tasks in the tasks.max configuration parameter. This can lead to performance gains when multiple files need to be parsed.

Data mapping

The sink connector requires knowledge of schemas, so you should use a suitable converter. For example, the Avro converter that comes with Schema Registry, the JSON converter with schemas enabled, or the Protobuf converter. Kafka record keys, if present, can be primitive types or a Connect struct, and the record value must be a Connect struct. Fields being selected from Connect structs must be of primitive types. If the data in the topic is not of a compatible format, implementing a custom Converter may be necessary.

Key handling

The default is for primary keys to not be extracted with pk.mode set to none, which is not suitable for advanced usage such as upsert semantics and when the connector is responsible for auto-creating the destination table. There are different modes that enable to use fields from the Kafka record key, the Kafka record value, or the Kafka coordinates for the record.

Refer to primary key configuration options for further detail.

Delete mode

The connector can delete rows in a database table when it consumes a tombstone record, which is a Kafka record that has a non-null key and a null value. This behavior is disabled by default, meaning that any tombstone records will result in a failure of the connector, making it easy to upgrade the JDBC connector and keep prior behavior.

Deletes can be enabled with delete.enabled=true, but only when the pk.mode is set to record_key. This is because deleting a row from the table requires the primary key be used as criteria.

Enabling delete mode does not affect the insert.mode.

Idempotent writes

The default insert.mode is insert. If it is configured as upsert, the connector will use upsert semantics rather than plain INSERT statements. Upsert semantics refer to atomically adding a new row or updating the existing row if there is a primary key constraint violation, which provides idempotence.

If there are failures, the Kafka offset used for recovery may not be up-to-date with what was committed as of the time of the failure, which can lead to re-processing during recovery. The upsert mode is highly recommended as it helps avoid constraint violations or duplicate data if records need to be re-processed.

Important

When a target table includes columns with CLOB, INSERT or UPSERT performance may be degraded. Try to use VARCHAR or VARCHAR2 instead.

Aside from failure recovery, the source topic may also naturally contain multiple records over time with the same primary key, making upserts desirable.

As there is no standard syntax for upsert, the following table describes the database-specific DML (dialect) that is used.

Database Upsert style
MySQL INSERT .. ON DUPLICATE KEY UPDATE ..
Oracle MERGE ..
PostgreSQL INSERT .. ON CONFLICT .. DO UPDATE SET ..
SQLite INSERT OR REPLACE ..
SQL Server MERGE ..
Sybase MERGE ..

Auto-creation and auto-evolution

Tip

Ensure the JDBC user has the appropriate permissions for DDL.

If auto.create is enabled, the connector can CREATE the destination table if it is found to be missing. The creation takes place online with records being consumed from the topic, since the connector uses the record schema as a basis for the table definition. Primary keys are specified based on the key configuration settings.

If auto.evolve is enabled, the connector can perform limited auto-evolution by issuing ALTER on the destination table when it encounters a record for which a column is found to be missing. Since data-type changes and removal of columns can be dangerous, the connector does not attempt to perform such evolutions on the table. Addition of primary key constraints is also not attempted. In contrast, if auto.evolve is disabled no evolution is performed and the connector task fails with an error stating the missing columns.

For both auto-creation and auto-evolution, the nullability of a column is based on the optionality of the corresponding field in the schema, and default values are also specified based on the default value of the corresponding field if applicable. We use the following mapping from Connect schema types to database-specific types:

Schema Type MySQL Oracle PostgreSQL SQLite SQL Server Vertica
INT8 TINYINT NUMBER(3,0) SMALLINT NUMERIC TINYINT INT
INT16 SMALLINT NUMBER(5,0) SMALLINT NUMERIC SMALLINT INT
INT32 INT NUMBER(10,0) INT NUMERIC INT INT
INT64 BIGINT NUMBER(19,0) BIGINT NUMERIC BIGINT INT
FLOAT32 FLOAT BINARY_FLOAT REAL REAL REAL FLOAT
FLOAT64 DOUBLE BINARY_DOUBLE DOUBLE PRECISION REAL FLOAT FLOAT
BOOLEAN TINYINT NUMBER(1,0) BOOLEAN NUMERIC BIT BOOLEAN
STRING TEXT NCLOB TEXT TEXT VARCHAR(MAX) VARCHAR(1024)
BYTES VARBINARY(1024) BLOB BYTEA BLOB VARBINARY(MAX) VARBINARY(1024)
‘Decimal’ DECIMAL(65,s) NUMBER(*,s) DECIMAL NUMERIC DECIMAL(38,s) DECIMAL(18,s)
‘Date’ DATE DATE DATE NUMERIC DATE DATE
‘Time’ TIME(3) DATE TIME NUMERIC TIME TIME
‘Timestamp’ TIMESTAMP(3) TIMESTAMP TIMESTAMP NUMERIC DATETIME2 TIMESTAMP

Auto-creation or auto-evolution is not supported for databases not mentioned here.

Important

For backwards-compatible table schema evolution, new fields in record schemas must be optional or have a default value. If you need to delete a field, the table schema should be manually altered to either drop the corresponding column, assign it a default value, or make it nullable.

Identifier quoting and case sensitivity

When this connector consumes a record and the referenced database table does not exist or is a missing columns, it can issue a CREATE TABLE or ALTER TABLE statement to create a table or add columns. The ability for the connector to create a table or add columns depends on how you set the auto.create and auto.evolve DDL support properties.

By default, CREATE TABLE and ALTER TABLE use the topic name for a missing table and the record schema field name for a missing column. Also by default, these statements attempt to preserve the case of the names by quoting the table and column names.

You can use the quote.sql.identifiers configuration to control the quoting behavior. For example, when quote.sql.identifiers=never, the connector never uses quotes within any SQL DDL or DML statement it generates. The default for this property is always.

Note that SQL standards define databases to be case insensitive for identifiers and keywords unless they are quoted. What this means is that CREATE TABLE test_case creates a table named TEST_CASE and CREATE TABLE "test_case" creates a table named test_case.

See also

For additional information about identifier quoting, see Database Identifiers, Quoting, and Case Sensitivity.

Table partitioning

Important

This section is only applicable to Postgres Dialect.

Versions 10.0.0, 10.0.1, 10.0.2, and 10.1.0 of this connector support the PARTITIONED TABLE table type out of the box. All other versions of this connector do not support the PARTITIONED TABLE table type, with the exception of versions 10.6.0 and later. For versions 10.6.0 and later, you must specify “PARTITIONED TABLE” as a comma-separated value in the table.types parameter–for example, "table.types": "PARTITIONED TABLE,TABLE". For more details about configuring table types, see the table.type configuration property.

Table truncation

When writing to a PostgreSQL database, the JDBC Sink connector shortens the names of tables it writes to if it determines that the table names exceed the maximum-permitted length for the database. For example, with the default settings for PostgreSQL 14, the maximum length of a table is 63 bytes. If you configure the connector with a table.name.format and a Kafka topic that when combined exceeds 63 characters, the connector will only use first 63 characters of that table name.

Additionally, if the table name is truncated, and the connector receives records from different upstream topics, the records will map to the same table name after truncation takes place. This may result in table name collision. Confluent recommends you avoid running the connector with very long Kafka topic names and table names.

Table parsing

This section describes how the JDBC Sink connector parses table information from topic names.

To begin, the connector splits the topic name on any table delimiter character that is not quoted. For example, with a delimiter of . and an opening and closing quote of ", the topic name foo.bar would be split into the parts foo and bar, while the topic name "foo.bar" would be parsed as foo.bar. The delimiting and quoting characters the connector uses are dialect-dependent; the characters from the example are common but not every dialect uses them.

After parsing the topic name, the connector reads information from those parts depending on how many are available and which dialect is in use:

  • If there are no parts, the connector fails.
  • If there is only one part, it is used as the table name, and no catalog or schema is used.
  • If there are three parts, the first part is used as the catalog, the second part is used as the schema, and the third is used as the table name.

Otherwise, the first part is used as either the catalog or schema (depending on the dialect in use), the second part is used as the table name, and no catalog is used.

Limitations

If you configure the JDBC Sink connector to upsert into an Oracle Database with a fixed-length CHAR data type as the primary key, the upsert will fail with the following error:

ORA-00001: unique constraint ($PK_FIELD) violated

To circumvent this limitation, use VARCHAR2 as the primary key data type.

License

This connector is available under the Confluent Community License.

Configuration properties

For a complete list of configuration properties for this connector, see JDBC Sink Connector Configuration Properties.

For an example of how to get Kafka Connect connected to Confluent Cloud, see Connect Self-Managed Kafka Connect to Confluent Cloud.

JSON and JSONB for PostgreSQL

PostgreSQL supports storing table data as JSON or JSONB (JSON binary format). Both the JDBC Source and Sink connectors support sourcing from or sinking to PostgreSQL tables containing data stored as JSON or JSONB.

The JDBC Source connector stores JSON or JSONB as STRING type in Kafka. For the JDBC Sink connector, JSON or JSONB should be stored as STRING type in Kafka and matching columns should be defined as JSON or JSONB in PostgreSQL.

Install the JDBC Sink connector

You can install this connector by using the Confluent Hub client installation instructions or by manually downloading the ZIP file.

Prerequisites

  • Confluent Platform. If you want to install the connector using Confluent Hub, you must install the Confluent Hub Client. This is installed by default with Confluent Enterprise.
  • Confluent CLI (requires separate installation)
  • SQLite is installed. You can also use another database. If you are using another database, be sure to adjust the connection.url setting. Confluent Platform includes JDBC drivers for SQLite and PostgreSQL, but if you’re using a different database you must also verify that the JDBC driver is available on the Kafka Connect process’s CLASSPATH.
  • Kafka and Schema Registry are running locally on the default ports.

Note

If you are running a multi-node Connect cluster, the JDBC connector and JDBC driver JARs must be installed on every Connect worker in the cluster. For more information, see JDBC Drivers.

Install the connector using Confluent Hub

To install the latest connector version using Confluent Hub Client, navigate to your Confluent Platform installation directory and run the following command:

confluent-hub install confluentinc/kafka-connect-jdbc:latest

You can install a specific version by replacing latest with a version number as shown in the following example:

confluent-hub install confluentinc/kafka-connect-jdbc:10.6.3

Install the connector manually

Download and extract the ZIP file for your connector and then follow the manual connector installation instructions.

Quick start

To see the basic functionality of the connector, we’ll be copying Avro data from a single topic to a local SQLite database.

Note

This quick start assumes that you are using the Confluent CLI, but standalone installations are also supported. By default ZooKeeper, Kafka, Schema Registry, Kafka Connect REST API, and Kafka Connect are started with the confluent local services start command. For more information, see Confluent Platform.

For an example of how to get Kafka Connect connected to Confluent Cloud, see Connect Self-Managed Kafka Connect to Confluent Cloud.

Load the JDBC Sink connector

Load the predefined JDBC sink connector.

  1. Optional: View the available predefined connectors with this command.

    Tip

    The command syntax for the Confluent CLI development commands changed in 5.3.0. These commands have been moved to confluent local. For example, the syntax for confluent start is now confluent local services start. For more information, see confluent local.

    confluent local services connect connector list
    

    Your output should resemble:

    Bundled Predefined Connectors (edit configuration under etc/):
      elasticsearch-sink
      file-source
      file-sink
      jdbc-source
      jdbc-sink
      hdfs-sink
      s3-sink
    
  2. Load the jdbc-sink connector:

    confluent local services connect connector load jdbc-sink
    

    Your output should resemble:

    {
      "name": "jdbc-sink",
      "config": {
        "connector.class": "io.confluent.connect.jdbc.JdbcSinkConnector",
        "tasks.max": "1",
        "topics": "orders",
        "connection.url": "jdbc:sqlite:test.db",
        "auto.create": "true",
        "name": "jdbc-sink"
      },
      "tasks": [],
      "type": null
    }
    

Tip

For non-CLI users, you can load the JDBC sink connector with this command:

${CONFLUENT_HOME}/bin/connect-standalone \
${CONFLUENT_HOME}/etc/schema-registry/connect-avro-standalone.properties \
${CONFLUENT_HOME}/etc/kafka-connect-jdbc/sink-quickstart-sqlite.properties

Produce a record in SQLite

  1. Produce a record into the orders topic.

     ./bin/kafka-avro-console-producer \
    --broker-list localhost:9092 --topic orders \
    --property value.schema='{"type":"record","name":"myrecord","fields":[{"name":"id","type":"int"},{"name":"product", "type": "string"}, {"name":"quantity", "type": "int"}, {"name":"price",
    "type": "float"}]}'
    

    The console producer waits for input.

  2. Copy and paste the following record into the terminal and press Enter:

    {"id": 999, "product": "foo", "quantity": 100, "price": 50}
    
  3. Query the SQLite database and you should see that the orders table was automatically created and contains the record.

    sqlite3 test.db
    sqlite> SELECT * from orders;
    foo|50.0|100|999
    

Database considerations

Note the following issues to keep in mind.

  1. String type is mapped to CLOB when auto.create=true. For example, if you have the following Avro schema:

    {
      "connect.name": "ksql.ratings",
      "fields": [
        {
          "name": "rating_id",
          "type": "long"
        },
        {
          "name": "user_id",
          "type": "int"
        },
        ...
        {
          "name": "channel",
          "type": "string"
        },
        {
          "name": "message",
          "type": "string"
        }
      ],
      "name": "ratings",
      "namespace": "ksql",
      "type": "record"
    }
    

    The values are mapped to CLOB in the table schema:

    Name        Null?    Type
    ----------- -------- ----------
    rating_id   NOT NULL NUMBER(19)
    user_id     NOT NULL NUMBER(10)
    stars       NOT NULL NUMBER(10)
    route_id    NOT NULL NUMBER(10)
    rating_time NOT NULL NUMBER(19)
    channel     NOT NULL CLOB
    message     NOT NULL CLOB
    

    Since String is mapped to CLOB when auto.create=true, a field using the String type cannot be used as a primary key. If you want to use a String type field as a primary key, you should create a table in the database first and then use auto.create=false. If not, an exception will occur containing the following line:

    ...
    "stringValue": "Exception chain:\njava.sql.SQLException: ORA-02329:
    column of datatype LOB cannot be unique or a primary key
    ...
    
  2. The table name and column names are case sensitive. For example, if you have the following Avro schema:

    {
      "connect.name": "ksql.pageviews",
      "fields": [
        {
          "name": "viewtime",
          "type": "long"
        },
        {
          "name": "userid",
          "type": "string"
        },
        {
          "name": "pageid",
          "type": "string"
        }
      ],
      "name": "pageviews",
      "namespace": "ksql",
      "type": "record"
    }
    

    A table named PAGEVIEWS is created, which causes the exception where pageviews is not found.

    create table pageviews (
      userid VARCHAR(10) NOT NULL PRIMARY KEY,
      pageid VARCHAR(50),
      viewtime VARCHAR(50)
      );
    
    Table PAGEVIEWS created.
    
    DESC pageviews;
    Name     Null?    Type
    -------- -------- ------------
    USERID   NOT NULL VARCHAR2(10)
    PAGEID            VARCHAR2(50)
    VIEWTIME          VARCHAR2(50)
    

    An exception message similar to the following one will be in the DLQ:

    {
      "key": "__connect.errors.exception.message",
      "stringValue": "Table \"pageviews\" is missing and auto-creation
      is disabled"
    }
    

    To resolve this issue, create a table in Oracle Database first and use auto.create=false.

    create table "pageviews" (
      "userid" VARCHAR(10) NOT NULL PRIMARY KEY,
      "pageid" VARCHAR(50),
      "viewtime" VARCHAR(50)
      );
    
    Table "pageviews" created.
    
    
    DESC "pageviews";
    
    Name     Null?    Type
    -------- -------- ------------
    userid   NOT NULL VARCHAR2(10)
    pageid            VARCHAR2(50)
    viewtime          VARCHAR2(50)
    

    Note

    The SQL standards define databases to be case insensitive for identifiers and keywords unless they are quoted. This means that CREATE TABLE test_case creates a table named TEST_CASE and CREATE TABLE "test_case" creates a table named test_case. This is also true of table column identifiers. For more information about identifier quoting, see Database Identifiers, Quoting, and Case Sensitivity.