Upgrade Confluent Platform

Note

If you are a Confluent Platform subscriber, and you have questions about upgrades or need help, contact us through our Support Portal.

Important

The Confluent Platform package includes Confluent Server by default and requires a confluent.license key in your server.properties file. Starting with Confluent Platform 5.4.x, the Confluent Server broker checks for a license during start-up. You must supply a license string in each broker’s properties file using the confluent.license property as below:

confluent.license=LICENCE_STRING_HERE_NO_QUOTES

If you want to use the Kafka broker, download the confluent-community package. The Kafka broker is the default in all Debian or RHEL and CentOS packages.

Preparation

Consider the guidelines below when preparing to upgrade.

  • If you’re running a Confluent Platform version that’s lower than 5.3.1, upgrade to 5.3.1 before upgrading to 6.1.x or higher.

  • Upgrade your entire platform deployment so that all components are running the same version. Do not bridge component versions.

  • Before upgrading, always back up all configuration files with their file permissions and ownership. Confluent Platform may not run if the proper ownership isn’t preserved on configuration files. By default, these files are located in the $CONFLUENT_HOME/etc directory and are organized by component.

  • Read the documentation and draft an upgrade plan that matches your specific requirements and environment before starting the upgrade process. In other words, don’t start working through this guide on a live cluster. Read the guide entirely, make a plan, then execute the plan.

  • Give careful consideration to the order in which components are upgraded. Starting with version 0.10.2, Java clients (producer and consumer) have the ability to communicate with older brokers. Version 0.10.2 clients can talk to version 0.10.0 or newer brokers. However, if your brokers are older than 0.10.0, you must upgrade all the brokers in the Apache Kafka® cluster before upgrading your clients. Version 0.10.2 brokers support 0.8.x and newer clients. Before 0.10.2, Kafka is backward compatible, which means that clients from Kafka 0.8.x releases (Confluent Platform 1.0.x) will work with brokers from Kafka release 0.8.x through 3.0 (Confluent Platform 2.0.x through 7.0.x), but not vice-versa. This means you always need to plan upgrades such that all brokers are upgraded before clients. Clients include any application that uses Kafka producer or consumer, command line tools, Camus, Schema Registry, REST Proxy, Kafka Connect and Kafka Streams.

    Important

    Due to a bug introduced in Kafka 0.9.0.0 (Confluent Platform 2.0.0), clients that depend on ZooKeeper (old Scala high-level Consumer and MirrorMaker if used with the old consumer) will not work with 0.10.x.x or newer brokers. Therefore, Kafka 0.9.0.0 (Confluent Platform 2.0.0) clients should be upgraded to 0.9.0.1 (Confluent Platform 2.0.1) before brokers are upgraded to 0.10.x.x or newer. This step is not necessary for 0.8.x or 0.9.0.1 clients.

    Important

    Although not recommended, some deployments have clients co-located with brokers (on the same node). In these cases, both the broker and clients share the same packages. This is problematic because all brokers must be upgraded before clients are upgraded. Pay careful attention to this when upgrading.

  • Starting in Confluent Platform 6.0, connectors are no longer packaged with Confluent Platform, and you need to manually install connectors. If you are running Connect and plan to upgrade from any version prior to version 6.0, refer to this important upgrade note.

  • Kafka 2.0.0 contains changes with potential compatibility impact and deprecations with respect to previous major versions (i.e. 0.8.x.x, 0.9.x.x, 0.10.x.x, 0.11.x.x and 1.0.x). Refer to the Apache Kafka documentation to understand how they affect applications using Kafka.

    Important

    Java 7 is no longer supported. Java 8 is now the minimum version required. For complete compatibility information, see the Supported Versions and Interoperability.

  • The LDAP Authorizer is deprecated. To configure group-based authorization using LDAP, you must migrate to the commercial confluent-server package when upgrading to 7.0.0. See Migrate to Confluent Server for details.

  • Consider using Confluent Control Center to monitor broker status during the rolling restart.

  • Determine and install the appropriate Java version. See Supported Java Versions to determine which versions are supported for the Confluent Platform version to which you are upgrading.

  • Determine if clients are co-located with brokers. If they are, then ensure all client processes are not upgraded until all Kafka brokers have been upgraded.

  • Decide on performing a rolling upgrade or a downtime upgrade. Confluent Platform supports both rolling upgrades (upgrade one broker at a time to avoid cluster downtime) and downtime upgrades (take down the entire cluster, upgrade it, and bring everything back up).

  • Read the Confluent Platform 7.0 Release Notes. They contain important information about noteworthy features, and changes to configurations that may impact your upgrade.

Upgrade procedures

Following is the recommended order of upgrades:

  1. Upgrade Zookeeper.

  2. Upgrade all Kafka brokers.

  3. Upgrade the rest of Confluent Platform components as described in the later part of this topic.

    In most cases, we recommend you upgrade Confluent Control Center last among the Confluent Platform components. However, if you are upgrading from 6.0.1 or 6.0.2 to 6.1.0 or later, you should upgrade Confluent Control Center first, and then upgrade your Kafka brokers to avoid Confluent Control Center instability. If you have already upgraded your Kafka brokers and Confluent Control Center crashes, upgrade Confluent Control Center and the situation should resolve itself.

  4. Upgrade Camus.

  5. If it makes sense, build applications that use Kafka producers and consumers against the new 7.0.x libraries and deploy the new versions. See Application Development for more details about using the 7.0.x libraries.

Upgrade ZooKeeper

ZooKeeper has been upgraded to 3.5.x in Confluent Platform 7.0.

Consider the following guidelines in preparation for the upgrade:

  • Back up all configuration files before upgrading.
  • Back up ZooKeeper data from the leader. It will get you back to the latest committed state in case of a failure.
  • Read through the documentation and draft an upgrade plan that matches your specific requirements and environment before starting the upgrade process.

Note

KIP-500: Kafka Raft (KRaft) replaces ZooKeeper, but KRaft is in early access and should be used in development only. It is not suitable for production. For more information, see Kafka Raft (KRaft) in Confluent Platform Preview.

Rolling upgrade of ZooKeeper

Perform the following steps to gather information needed for a rolling upgrade:

  1. To find who is the leader, run the following command:

    echo mntr | nc localhost 2181 | grep zk_server_state
    

    Verify that there is only one leader in the entire ZooKeeper ensemble.

  2. To find how many nodes are in sync with the leader, run the following command:

    echo mntr | nc localhost 2181 | grep zk_synced_followers
    
  3. Verify that all the followers are in sync with the leader:

    echo mntr | nc localhost 2181 | grep zk_synced_followers
    

For each ZooKeeper server, repeat the following steps. The leader ZooKeeper server should be upgraded last:

  1. Stop the ZooKeeper process gracefully.

  2. Upgrade the ZooKeeper binary.

  3. Start the ZooKeeper process.

  4. Wait until all the followers are in sync with the leader:

    echo mntr | nc localhost 2181 | grep zk_synced_followers
    

If there is an issue during an upgrade, you can rollback using the same steps.

The AdminServer

An embedded Jetty-based AdminServer was added in ZooKeeper 3.5.

The AdminServer is disabled by default in ZooKeeper distributed as part of Confluent Platform. To enable the AdminServer, set admin.enableServer=true in your local zookeeper.properties file.

The AdminServer is enabled by default (on port 8080) in ZooKeeper provided by the Apache Kafka® distribution. To configure the AdminServer, see the AdminServer configuration.

Four letter words whitelist in ZooKeeper

Starting in ZooKeeper 3.5.3, the Four Letter Words commands must be explicitly white listed in the zookeeper.4lw.commands.whitelist setting for ZooKeeper server to enable the commands. By default the whitelist only contains the srvr command which zkServer.sh uses. The rest of the Four Letter Words commands are disabled by default.

An example to whitelist stat, ruok, conf, and isro commands while disabling the rest of Four Letter Words command:

4lw.commands.whitelist=stat, ruok, conf, isro

An example to whitelist all Four Letter Words commands:

4lw.commands.whitelist=*

When running ZooKeeper in a Docker container, use the Java system property, -e KAFKA_OPTS=-'Dzookeeper.4lw.commands.whitelist=', in the docker run command. For example:

docker run -d \
 --net=host
 --name=zookeeper \
 -e ZOOKEEPER_CLIENT_PORT=32181 \
 -e ZOOKEEPER_TICK_TIME=2000 \
 -e ZOOKEEPER_SYNC_LIMIT=2 \
 -e KAFKA_OPTS='-Dzookeeper.4lw.commands.whitelist=*' \
 confluentinc/cp-zookeeper:7.0.16

See The Four Letter Words for more information.

Upgrade issue with missing snapshot file

The ZooKeeper upgrade from 3.4.X to 3.5.X can fail with the following error if there are no snapshot files in the 3.4 data directory.

ERROR Unable to load database on disk
(org.apache.zookeeper.server.quorum.QuorumPeer) java.io.IOException: No
snapshot found, but there are log entries. Something is broken! at
org.apache.zookeeper.server.persistence.FileTxnSnapLog.restore(FileTxnSnapLog.java:222)
at org.apache.zookeeper.server.ZKDatabase.loadDataBase(ZKDatabase.java:240) at
org.apache.zookeeper.server.quorum.QuorumPeer.loadDataBase(QuorumPeer.java:919)
at org.apache.zookeeper.server.quorum.QuorumPeer.start(QuorumPeer.java:905) at
org.apache.zookeeper.server.quorum.QuorumPeerMain.runFromConfig(QuorumPeerMain.java:205)
at
org.apache.zookeeper.server.quorum.QuorumPeerMain.initializeAndRun(QuorumPeerMain.java:123)
at
org.apache.zookeeper.server.quorum.QuorumPeerMain.main(QuorumPeerMain.java:82)

This usually happens in test upgrades where ZooKeeper 3.5.X is trying to load an existing 3.4 data directory in which no snapshot file has been created. For more details about this issue, refer to ZOOKEEPER-3056.

The recommended workaround is:

  1. Take a backup of the current ZooKeeper data directory.
  2. Look for snapshot files (file names starting with snapshot) in the ZooKeeper data directory.

For more details about the workaround, refer to the ZooKeeper Upgrade FAQ.

Upgrade Kafka brokers

In a rolling upgrade scenario, upgrade one Kafka broker at a time, taking into consideration the recommendations for doing rolling restarts to avoid downtime for end users.

In a downtime upgrade scenario, take the entire cluster down, upgrade each Kafka broker, then start the cluster.

Steps to upgrade for any fix pack release

Any fix pack release can perform a rolling upgrade (for example, 3.1.1 to 3.1.2) by simply upgrading each broker one at a time.

To upgrade each broker:

  1. Stop the broker.
  2. Upgrade the software (see below for your packaging type).
  3. Start the broker.

Steps for upgrading to 7.0.x

In a rolling upgrade scenario, upgrading to Confluent Platform 7.0.x (Kafka 3.0.x) requires special steps, because Kafka 3.0.x includes changes to wire protocol and the inter-broker protocol.

Follow these steps for a rolling upgrade:

  1. Update server.properties on all Kafka brokers by modifying the inter.broker.protocol.version and log.message.format.version properties to match the currently installed version.

    In Confluent Platform version 7.0.0 and later, the broker configuration log.message.format.version and topic configuration message.format.version parameters are deprecated. The values of both configurations are assumed to be 3.0 if inter.broker.protocol.version is 3.0 or later. If log.message.format.version or message.format.version are set, we recommend clearing them at the same time as the inter.broker.protocol.version upgrade to 3.0, to avoid potential compatibility issues if the inter.broker.protocol.version is downgraded. For more information, see KIP-724.

    For Confluent Platform versions before 7.0.0:

    • If the current value of log.message.format.version is earlier than 0.11.0, upgrade to 0.11.0 or later as soon as possible, because support for older message formats is deprecated and will be dropped in an upcoming release.
    • If the current value of log.message.format.version is 0.11.0 or later, you can drop the setting or leave it the same. Either way, there is no need to change its value as part of the upgrade process.

    If you use Confluent Server, you must provide a valid Confluent license key, for example, confluent.license=123.

    Note

    You don’t need to restart the broker to activate the modified properties.

    The following table shows the broker protocol and log message format versions that correspond with each Confluent Platform version.

    Confluent Platform version Broker protocol version Log message format version
    7.0.x inter.broker.protocol.version=3.0 log.message.format.version parameter is ignored and the value is inferred from inter.broker.protocol.version
    6.2.x inter.broker.protocol.version=2.8 log.message.format.version=2.8
    6.1.x inter.broker.protocol.version=2.7 log.message.format.version=2.7
    6.0.x inter.broker.protocol.version=2.6 log.message.format.version=2.6
    5.5.x inter.broker.protocol.version=2.5 log.message.format.version=2.5
    5.4.x inter.broker.protocol.version=2.4 log.message.format.version=2.4
    5.3.x inter.broker.protocol.version=2.3 log.message.format.version=2.3
    5.2.x inter.broker.protocol.version=2.2 log.message.format.version=2.2
    5.1.x inter.broker.protocol.version=2.1 log.message.format.version=2.1
    5.0.x inter.broker.protocol.version=2.0 log.message.format.version=2.0
    4.1.x inter.broker.protocol.version=1.1 log.message.format.version=1.1
    4.0.x inter.broker.protocol.version=1.0 log.message.format.version=1.0
    3.3.x inter.broker.protocol.version=0.11.0 log.message.format.version=0.11.0
    3.2.x inter.broker.protocol.version=0.10.2 log.message.format.version=0.10.2
    3.1.x inter.broker.protocol.version=0.10.1 log.message.format.version=0.10.1
    3.0.x inter.broker.protocol.version=0.10.0 log.message.format.version=0.10.0
    2.0.x inter.broker.protocol.version=0.9.0 log.message.format.version=0.9.0
  2. Upgrade each Kafka broker, one at a time.

    1. Stop the broker.

    2. Upgrade the software as necessary for your packaging type.

    3. Start the broker.

      Important

      The active controller should be the last broker you restart. This ensures that the active controller isn’t moved on each broker restart, which would slow down the restart. To identify which broker in the cluster is the active controller, check the kafka.controller:type=KafkaController,name=ActiveControllerCount metric. The active controller reports 1 and the remaining brokers report 0. For more information, see Broker Metrics.

  3. After all Kafka brokers have been upgraded, make the following update in server.properties: inter.broker.protocol.version=3.0.

  4. Restart each Kafka broker, one at a time, to apply the configuration change.

  5. If upgrading from Confluent Platform 3.2.x or older, take the following additional steps.

    Because the message format is the same in Confluent Platform 3.3.x through 7.0.x, this step is optional if the upgrade is from Confluent Platform 3.3.x or newer.

    1. Once all (or most) consumers have been upgraded to 7.0.x, set log.message.format.version=3.0 on each broker. If inter.broker.protocol.version is 3.0 or later, and log.message.format.version is 0.11.0 or later, you can skip this step.
    2. Restart each Kafka broker, one at a time.

Note that the older Scala clients, which are no longer maintained, do not support the message format introduced in 0.11, so to avoid conversion costs (or to take advantage of exactly once semantics), the newer Java clients must be used.

Confluent license

Add the confluent.license configuration parameter to server.properties. Confluent Platform 5.4.x and later, requires confluent.license to start. For more information, see confluent-server.

Advertised listeners

When you upgrade from 5.x or earlier version to 6.x or later version, you need to include the following properties in the server.properties file:

Security

Starting with 5.4.x, the new authorizer class kafka.security.authorizer.AclAuthorizer replaces kafka.security.auth.SimpleAclAuthorizer. You must manually change existing instances of kafka.security.auth.SimpleAclAuthorizer to kafka.security.authorizer.AclAuthorizer in the server.properties file. For more information, see ACL concepts.

Replication factor for Self-Balancing Clusters

The confluent.balancer.topic.replication.factor setting was added in Confluent Platform 6.0.0 for Self-Balancing configuration.

If the value of confluent.balancer.topic.replication.factor is greater than the total number of brokers, the brokers will not start.

The default value of confluent.balancer.topic.replication.factor is 3.

For details on the setting, see confluent.balancer.topic.replication.factor.

Upgrade DEB packages using APT

  1. Back up all configuration files from /etc, including, for example, /etc/kafka, /etc/kafka-rest, and /etc/schema-registry.

  2. Stop the services and remove the existing packages and their dependencies. This can be done on one server at a time for a rolling upgrade.

    # The example below removes the Kafka package
    sudo kafka-server-stop
    sudo apt-get remove confluent-kafka
    
    # To remove Confluent Platform and all its dependencies at once,
    # run the following command after all services are stopped.
    sudo apt-get autoremove confluent-platform-*
    

    Important

    If you’re running Confluent Server, the previous autoremove command won’t work. Instead, run the following command:

    sudo yum remove confluent-*
    
  3. Remove the older GPG key and import the updated key. If you have already imported the updated 8b1da6120c2bf624 key, then you can skip this step. However, if you still have the old 670540c841468433 key installed, now is the time to remove it and import the 8b1da6120c2bf624 key:

    sudo apt-key del 41468433
    wget -qO - https://packages.confluent.io/deb/7.0/archive.key | sudo apt-key add -
    
  4. Remove the repository files of the previous version.

    sudo add-apt-repository -r "deb https://packages.confluent.io/deb/<currently installed version> stable main"
    
  5. Add the 7.0 repository to /etc/apt/sources.list.

    Attention

    After Confluent Platform 8.0, the librdkafka, Avro, and libserades C/C++ client packages will NOT be available from the https://packages.confluent.io/deb location. You will need to obtain those client packages from https://packages.confluent.io/clients after the Confluent Platform 8.0 release.

    For the clients repository, you must obtain your Debian distribution’s release “Code Name”, such as buster, focal, etc. You can do this by calling lsb_release -cs. The following example makes this call with $(lsb_release -cs), which should work in most cases. If it does not, you must pick the closest Debian or Ubuntu code name for your Debian Linux distribution that matches the supported Debian & Ubuntu Operating Systems supported by Confluent Platform.

    sudo add-apt-repository "deb https://packages.confluent.io/deb/7.0 stable main"
    sudo add-apt-repository "deb https://packages.confluent.io/clients/deb $(lsb_release -cs) main"
    
  6. Refresh repository metadata.

    sudo apt-get update
    
  7. If you modified the configuration files, apt will prompt you to resolve the conflicts. Be sure to keep your original configuration. Install the new version:

      sudo apt-get install confluent-platform
    
    # Or install the packages you need one by one. For example, to install only Kafka:
      sudo apt-get install confluent-kafka
    

    Tip

    You can view all available Confluent Platform builds with this command:

    apt-cache show confluent-platform
    

    You can install specific Confluent Platform builds by appending the version (<version>) to the install command:

    sudo apt-get install confluent-platform-<version>
    
  8. Start Confluent Platform components.

    kafka-server-start -daemon /etc/kafka/server.properties
    

Upgrade RPM packages by using YUM

  1. Back up all configuration files from /etc, including, for example, /etc/kafka, /etc/kafka-rest, and /etc/schema-registry.

  2. Stop the services and remove the existing packages and their dependencies. This can be done on one server at a time for a rolling upgrade (refer to Steps for upgrading to 7.0.x).

    # The example below removes the Kafka package
      sudo kafka-server-stop
      sudo yum remove confluent-kafka
    
    # To remove Confluent-Platform 5.5 and all its dependencies at once, run the following after stopping all services
      sudo yum autoremove confluent-platform-2.12
    
  3. Remove the repository files of the previous version.

    sudo rm /etc/yum.repos.d/confluent.repo
    
  4. Remove the older GPG key. This step is optional if you haven’t removed Confluent’s older (670540c841468433) GPG key. Confluent’s newer (8b1da6120c2bf624) key would appear in the RPM Database as gpg-pubkey-0c2bf624-60904208

    sudo rpm -e gpg-pubkey-41468433-54d512a8
    sudo rpm --import https://packages.confluent.io/rpm/7.0/archive.key
    
  5. Add the repository to your /etc/yum.repos.d/ directory in a file named confluent-7.0.repo.

    Attention

    After Confluent Platform 8.0, the librdkafka, Avro, and libserades C/C++ client packages will NOT be available from the https://packages.confluent.io/rpm location. You will need to obtain those client packages from https://packages.confluent.io/clients after the Confluent Platform 8.0 release.

    The $releasever and $basearch are Yum placeholder variables that change depending on what release version of the OS and CPU Architecture the OS is running. These are meant to be literal $releasever $basearch values in the Yum configuration, not shell variables.

    [confluent-7.0]
    name=Confluent repository for 7.0.x packages
    baseurl=https://packages.confluent.io/rpm/7.0
    gpgcheck=1
    gpgkey=https://packages.confluent.io/rpm/7.0/archive.key
    enabled=1
    
    [Confluent-Clients]
    name=Confluent Clients repository
    baseurl=https://packages.confluent.io/clients/rpm/centos/$releasever/$basearch
    gpgcheck=1
    gpgkey=https://packages.confluent.io/clients/rpm/archive.key
    enabled=1
    
  6. Refresh repository metadata.

    sudo yum clean all
    
  7. Install the new version. Note that yum may override your existing configuration files, so you will need to restore them from the backup after installing the packages.

    sudo yum install confluent-platform
    
    # Or install the packages you need one by one. For example, to install just Kafka:
    sudo yum install confluent-kafka
    

    Important

    If you are running Confluent Server, you install confluent-server instead of confluent-kafka. Both packages can’t co-exist on the same system, so install each desired package individually, for example, run yum install confluent-server instead of yum install confluent-platform.

    Tip

    You can install the entire platform or the individual component packages. For a listing of packages, see Confluent Platform Packages.

  8. Start services.

    kafka-server-start -daemon /etc/kafka/server.properties
    

Upgrade using TAR or ZIP archives

For ZIP and TAR archives, you can delete the old archives directory after the new archive folder has been created and any previous configuration files have been copied into it as described in the following steps.

  1. Return to the directory where you installed Confluent Platform.

  2. Back up all configuration files from ./etc, including, for example, ./etc/kafka, ./etc/kafka-rest, ./etc/schema-registry, and ./etc/confluent-control-center.

  3. Stop the services and remove the existing packages and their dependencies. This can be done on one server at a time for a rolling upgrade (refer to Steps for upgrading to 7.0.x).

      ./bin/control-center-stop
      ./bin/kafka-rest-stop
      ./bin/schema-registry-stop
      ./bin/kafka-server-stop
      ./bin/zookeeper-server-stop
    
    # To remove Confluent Platform and all its dependencies at once, run the following after stopping all services
      cd ..
      rm -R confluent-3.3.1 (use the installed version number)
    
  4. Unpack the new archive. Note that YUM may override your existing configuration files, so you will need to restore them from the backup after installing the packages.

      tar xzf confluent-7.0.16.tar.gz
    
    # Or for ZIP archives:
    
      unzip confluent-7.0.16.zip
    
  5. Start services.

    sudo confluent-7.0.16/bin/zookeeper-server-start -daemon /etc/kafka/zookeeper.properties
    sudo confluent-7.0.16/bin/kafka-server-start -daemon /etc/kafka/server.properties
    

Upgrade Schema Registry

You can upgrade Schema Registry after all Kafka brokers have been upgraded.

The following are a few of the version-specific upgrade considerations:

  • To live update a Schema Registry cluster using Kafka election to version 6.0, first make sure that the previous instances are already updated to version 5.0.1 or newer.

    Instances running Confluent Platform 5.0.1 or later support expansion of Kafka election protocol as a part of upgrades without breaking live upgrade compatibility.

  • If you have a multi-node Schema Registry cluster running Confluent Platform 4.1.1 or earlier, do not perform a rolling upgrade to 5.2.x directly. Doing so might generate errors caused by an intermediate state mixed live cluster of legacy and newer Schema Registry nodes, which require feature parity for managing schema IDs. Instead, do one of the following:

    • If you want to use a rolling upgrade, first upgrade to version 4.1.2 or 4.1.3, then perform a rolling upgrade to 5.2.x or later version.
    • Stop the whole 4.1.1 cluster and upgrade all Schema Registry nodes at the same time to 5.2.x or a later version.
  • Starting with Confluent Platform 6.2.2, Schema Registry provides a new endpoint for Confluent Control Center to filter visible Schema Registry clusters which supports Control Center interaction with an RBAC enabled Schema Registry, and Control Center is upgraded to call this endpoint. Therefore, post-6.2.2 versions of Control Center are not compatible with pre-6.2.2 versions of Schema Registry because Control Center will try to call an endpoint which does not exist in pre-6.2.2 schema registries. If you are upgrading your deployments from Confluent Platform 6.2.1 or older, you must upgrade both Control Center and Schema Registry together to 6.2.2 or newer in order for Control Center to work properly with RBAC enabled Schema Registry clusters. Specifically, if you upgrade Control Center from pre-6.2.2, you must also upgrade Schema Registry.

To upgrade Schema Registry:

  1. For RBAC-enabled environments only: Add ResourceOwner for the REST Proxy user for the Confluent license topic resource (default name is _confluent-command). For example:

    confluent iam rolebinding create \
    --role ResourceOwner \
    --principal User:<service-account-id> \
    --resource Topic:_confluent-command \
    --kafka-cluster-id <kafka-cluster-id>
    
  2. Stop Schema Registry:

    schema-registry-stop
    
  3. Back up the configuration file. For example:

    cp SR.properties /back-up/SR.properties
    
  4. Remove the old version:

    yum remove confluent-schema-registry-<old release number>
    

    For example:

    yum remove confluent-schema-registry-5.1.2
    
  5. Install the new version:

    yum install -y confluent-schema-registry-<new release number>
    
  6. Restart Schema Registry:

    schema-registry-start SR.properties
    

Upgrade Confluent REST Proxy

You can upgrade the Confluent REST Proxy service after all Kafka brokers have been upgraded.

To upgrade the REST Proxy:

  1. For RBAC-enabled environments only: Add ResourceOwner for the REST Proxy user for the Confluent license topic resource (default name is _confluent-command). For example:

    confluent iam rolebinding create \
    --role ResourceOwner \
    --principal User:<service-account-id> \
    --resource Topic:_confluent-command \
    --kafka-cluster-id <kafka-cluster-id>
    
  2. Follow the same steps as described above to upgrade the package (back up configuration files, remove packages, install upgraded packages, etc.).

  3. Restart the Confluent REST Proxy service.

Upgrade Kafka Streams applications

You can upgrade Kafka Streams applications independently, without requiring Kafka brokers to be upgraded first.

Follow the instructions in the Kafka Streams Upgrade Guide to upgrade your applications to use the latest version of Kafka Streams.

Upgrade Kafka Connect

You can upgrade Kafka Connect in either standalone or distributed mode.

Important

Starting in Confluent Platform 6.0, connectors are no longer packaged with Confluent Platform, and you need to manually install connectors. If you are upgrading Confluent Platform from any version prior to version 6.0, refer to this important upgrade note.

Upgrade Kafka Connect standalone mode

You can upgrade Kafka Connect in standalone mode after all Kafka brokers have been upgraded.

To upgrade Kafka Connect, follow the same steps above to upgrade the package (back up config files, remove packages, install upgraded packages, etc.). Then, restart the client processes.

Upgrade Kafka Connect distributed mode

A new required configuration, status.storage.topic was added to Kafka Connect in 0.10.0.1. To upgrade a Kafka Connect cluster, add this configuration before updating to the new version. The setting will be ignored by older versions of Kafka Connect.

  1. Back up worker configuration files.
  2. Modify your configuration file to add the status.storage.topic setting. You can safely modify the configuration file while the worker is running. Note that you should create this topic manually. See Distributed Mode Configuration in the Connect User Guide for a detailed explanation.
  3. Perform a rolling restart of the workers.

Upgrade ksqlDB

To upgrade Confluent Platform ksqlDB to the latest version, follow the steps in Upgrading ksqlDB.

Upgrade Camus

Camus was deprecated in Confluent Platform 3.0.0 and was removed in Confluent Platform 5.0.0.

Upgrade Confluent Control Center

Follow the instructions in the Confluent Control Center Upgrade Guide.

Upgrade other client applications

Review Cross-Component Compatibility before you upgrade your client applications.

Version 0.10.2 or newer Java clients (producer and consumer) work with the version 0.10.0 or newer Kafka brokers.

If your brokers are older than 0.10.0, you must upgrade all the brokers in the Apache Kafka® cluster before upgrading your Java clients.

Version 0.10.2 brokers support version 0.8.x and newer Java clients.

Confluent’s C/C++, Python, Go and .NET clients support all released Kafka broker versions, but not all features may be available on all broker versions since some features rely on newer broker functionality. See Build Client Applications for Confluent Platform for the list of Kafka features supported in the latest versions of clients.

If it makes sense, build applications that use Kafka producers and consumers against the new 3.0.x libraries and deploy the new versions. See Application Development for details about using the 3.0.x libraries.

Additional client application upgrade information

  • The Consumer API has changed between Kafka 0.9.0.x and 0.10.0.0.
  • In librdkafka version 0.11.0, the default value for the api.version.request configuration property has changed from false to true, meaning that librdkafka will make use of the latest protocol features of the broker without the need to set this property to true explicitly. Due to a bug in Kafka 0.9.0.x, this will cause client-broker connections to stall for 10 seconds during connection-startup on 0.9.0.x brokers. The workaround for this is to explicitly configure api.version.request to false on clients communicating with <=0.9.0.x brokers.