Link Schemas on Confluent Platform

Schema Registry supports Schema Linking. The quick start below guides you step-by-step with hands-on examples of how to create and use exporters to implement schema linking on your clusters. Following the quick start are details about how to work with schema contexts and exporters. Note that contexts are also useful outside of Schema Linking to organize schemas into purpose-specific groups and create virtual “sub-registries”.

What is Schema Linking?

Schema Linking keeps schemas in sync across two Schema Registry clusters. Schema Linking can be used in conjunction with Cluster Linking to keep both schemas and topic data in sync across two Schema Registry and Kafka clusters.

Schema Registry introduces two new concepts to support Schema Linking:

• Schema contexts - A schema context represents an independent scope in Schema Registry, and can be used to create any number of separate “sub-registries” within one Schema Registry cluster. Each schema context is an independent grouping of schema IDs and subject names, allowing the same schema ID in different contexts to represent completely different schemas. Any schema ID or subject name without an explicit context lives in the default context, denoted by a single dot .. An explicit context starts with a dot and can contain any parts separated by additional dots, such as .mycontext.subcontext. Context names operate similar to absolute Unix paths, but with dots instead of forward slashes (the default schema is like the root Unix path). However, there is no relationship between two contexts that share a prefix.
• Schema exporters - A schema exporter is a component that resides in Schema Registry for exporting schemas from one Schema Registry cluster to another. The lifecycle of a schema exporter is managed through APIs, which are used to create, pause, resume, and destroy a schema exporter. A schema exporter is like a “mini-connector” that can perform change data capture for schemas.

The Quick Start below shows you how to get started using schema exporters and contexts for Schema Linking.

For in-depth descriptions of these concepts, see Schema contexts and Schema Exporters

Prerequisites

Schema Linking is supported on Confluent Platform 7.0 and later versions, and on Confluent Cloud as described in Schema Linking on Confluent Cloud. Schema Linking is not supported on Confluent Community editions. To learn more, see Confluent Platform Packages.

Quick Start

If you’d like to jump in and try out Schema Linking now, follow the steps below. At the end of the Quick Start, you’ll find deep dives on contexts, exporters, command options, and APIs, which may make more sense after you’ve experimented with some hands-on examples.

Tip

Be sure to configure all properties described in the tables below. If you get a 404 error when using the exporters API or schema-exporter commands, you likely did not configure the Schema Registry properties files to enable Schema Linking, as described below.

KRaft and ZooKeeper

Important

As of Confluent Platform 7.5, ZooKeeper is deprecated for new deployments. Confluent recommends KRaft mode for new deployments. To learn more about running Kafka in KRaft mode, see KRaft Overview, the KRaft steps in the Platform Quick Start, and Settings for other components.

This tutorial provides examples for both KRaft mode and ZooKeeper mode.

For KRaft, the examples show a combined mode configuration, where for each cluster the broker and controller run on the same server. Currently, combined mode is not intended for production use but is shown here to simplify the tutorial. If you want to run controllers and brokers on separate servers, use KRaft in isolated mode. To learn more, see KRaft Overview and Kraft mode under Configure Confluent Platform for production.

Configuration snapshot preview

This tutorial guides you through setup of two KRaft controllers (or ZooKeepers), Confluent Servers (brokers), and Schema Registries, to serve as source and destination, along with a single Confluent Control Center with access to both.

Following is a summary of the configurations for each of these files. The steps in the next sections guide you through a quick way to set up these files, using existing properties files as a basis for your specialized ones.

Tip

To learn more about this configuration, see Enabling Multi-Cluster Schema Registry.

KRaft modeZooKeeper mode

Files	Configurations
server0.properties	listeners=PLAINTEXT://:9092, CONTROLLER://:9094 (KRaft combined mode) log.dirs=/tmp/kraft-combined-logs confluent.metrics.reporter.bootstrap.servers=localhost:9092 The following configurations are specific to multi-cluster Schema Registry setup for this broker: confluent.http.server.listeners=http://0.0.0.0:8090 confluent.schema.registry.url=http://localhost:8081
server1.properties	listeners=PLAINTEXT://:9093, CONTROLLER://:9095 (KRaft combined mode) log.dirs=/tmp/kraft-combined-logs-1 confluent.metrics.reporter.bootstrap.servers=localhost:9093 The following configurations are specific to multi-cluster Schema Registry setup for this broker: confluent.http.server.listeners=http://0.0.0.0:8091 confluent.schema.registry.url=http://localhost:8082
schema-registry0.properties	listeners=PLAINTEXT://:8081 kafkastore.bootstrap.servers=localhost:9092 The following configurations are specific to Schema Linking; they should be the same in both Schema Registry properties files: resource.extension.class=io.confluent.schema.exporter.SchemaExporterResourceExtension kafkastore.update.handlers=io.confluent.schema.exporter.storage.SchemaExporterUpdateHandler password.encoder.secret=mysecret
schema-registry1.properties	listeners=PLAINTEXT://:8082 kafkastore.bootstrap.servers=localhost:9093 kafkastore.topic=_schemas1 (must be different from the default _schemas in schema-registry0.properties so that the registries do not overwrite each other [1]) schema.registry.group.id=schema-registry-dest (must be different from the group ID used by schema-registry0.properties, which takes the default ID schema-registry [1]) The following configurations are specific to Schema Linking; they should be the same in both Schema Registry properties files: resource.extension.class=io.confluent.schema.exporter.SchemaExporterResourceExtension kafkastore.update.handlers=io.confluent.schema.exporter.storage.SchemaExporterUpdateHandler password.encoder.secret=mysecret
control-center-multi-sr.properties	bootstrap.servers=localhost:9092 (the KRaft broker is aware of its controller 9094, so no additional config is needed) confluent.controlcenter.kafka.AK1.bootstrap.servers=localhost:9093 (the KRaft broker is aware of its controller 9095, so no additional config is needed) confluent.controlcenter.streams.cprest.url=http://0.0.0.0:8090 confluent.controlcenter.schema.registry.url=http://localhost:8081 confluent.controlcenter.kafka.AK1.cprest.url=http://0.0.0.0:8091 confluent.controlcenter.schema.registry.SR-AK1.url=http://localhost:8082 The configurations for cpcrest.url, confluent.controlcenter.kafka.AK1.cprest.url, and confluent.controlcenter.schema.registry.SR-AK1.url are new properties, specific to multi-cluster Schema Registry.

Footnotes

[1]	(1, 2) The values for kafkastore.topic and schema.registry.group.id must be unique for each Schema Registry properties file because in this example the two registries are colocated on localhost. If the Schema Registry clusters were on different hosts, you would not need to make these changes.

Set environment variables

Add these two lines to your .bashrc or .bash-profile so that they are executed whenever you open a new command window.

KRaft modeZooKeeper mode

The rest of the tutorial expects these environment variables to be set for KRaft mode:

export CONFLUENT_HOME=<CP installation directory>

export CONFLUENT_CONFIG=$CONFLUENT_HOME/etc/kafka/kraft

Configure the Kafka servers

KRaft modeZooKeeper mode

1. Copy the default Kafka properties file to use as a basis for a specialized KRaft combined mode properties file:

   cp $CONFLUENT_CONFIG/server.properties $CONFLUENT_CONFIG/server0.properties
   

   Tip

   KRaft combined mode servers support both a controller and broker in a single properties file.

2. Update the controller on server0 to use port 9094.

   sed -i '' -e "s/9093/9094/g" $CONFLUENT_CONFIG/server0.properties
   

3. Copy server0.properties (the file you just created) and to use as the basis for server1:

   cp $CONFLUENT_CONFIG/server0.properties $CONFLUENT_CONFIG/server1.properties
   

4. Update the Kafka data directory for the server1.

   sed -i '' -e "s/kraft-combined-logs/kraft-combined-logs-1/g" $CONFLUENT_CONFIG/server1.properties
   

5. Update the port numbers for server1.

   sed -i '' -e "s/9092/9093/g"  $CONFLUENT_CONFIG/server1.properties
   

   sed -i '' -e "s/9094/9095/g" $CONFLUENT_CONFIG/server1.properties
   

   sed -i '' -e "s/8090/8091/g" $CONFLUENT_CONFIG/server1.properties
   

6. Append the following lines at the end of server0.properties, specific to the multi-cluster Schema Registry setup for this broker:

   echo "confluent.http.server.listeners=http://0.0.0.0:8090" >> $CONFLUENT_CONFIG/server0.properties
   

   echo "confluent.schema.registry.url=http://localhost:8081" >> $CONFLUENT_CONFIG/server0.properties
   

7. Append the following lines at the end of server1.properties, specific to the multi-cluster Schema Registry setup for this broker:

   echo "confluent.http.server.listeners=http://0.0.0.0:8091" >> $CONFLUENT_CONFIG/server1.properties
   

   echo "confluent.schema.registry.url=http://localhost:8082" >> $CONFLUENT_CONFIG/server1.properties
   

8. In a new command window, change directories into $CONFLUENT_HOME to run the following KRaft setup commands for server0.

   cd $CONFLUENT_HOME
   

9. Generate a random-uuid for server0 using the kafka-storage tool.

   KAFKA_CLUSTER_ID="$(bin/kafka-storage random-uuid)"
   

10. Format the log directories for server0:

    ./bin/kafka-storage format -t $KAFKA_CLUSTER_ID -c $CONFLUENT_CONFIG/server0.properties --ignore-formatted
    

    This is the window in which you will run server0.

11. In a new command window, change directories into $CONFLUENT_HOME to run the following KRaft setup commands for server1.

    cd $CONFLUENT_HOME
    

12. Generate a random-uuid for server1 using the kafka-storage tool.

    KAFKA_CLUSTER_ID="$(bin/kafka-storage random-uuid)"
    

13. Format the log directories for server1:

    ./bin/kafka-storage format -t $KAFKA_CLUSTER_ID -c $CONFLUENT_CONFIG/server1.properties --ignore-formatted
    

    This is the window in which you will run server1.

    Tip

    The kafka-storage command is run only once per broker/controller, each of which must have a unique cluster ID. You must generate the cluster IDs and format the log directories in separate dedicated command windows, one per server. You cannot use the kafka-storage command to update an existing cluster. If you make a mistake in configurations for either server at this point, you must recreate the directories from scratch, and work through the steps again.

Configure the Schema Registry properties files

1. Copy the default Schema Registry properties files to use as a basis for two specialized Schema Registry properties files:

   cp $CONFLUENT_HOME/etc/schema-registry/schema-registry.properties $CONFLUENT_HOME/etc/schema-registry/schema-registry0.properties
   

   cp $CONFLUENT_HOME/etc/schema-registry/schema-registry.properties $CONFLUENT_HOME/etc/schema-registry/schema-registry1.properties
   

2. Append the following same lines to the end of both schema-registry0.properties:

   echo "resource.extension.class=io.confluent.schema.exporter.SchemaExporterResourceExtension" >> $CONFLUENT_HOME/etc/schema-registry/schema-registry0.properties
   

   echo "kafkastore.update.handlers=io.confluent.schema.exporter.storage.SchemaExporterUpdateHandler" >> $CONFLUENT_HOME/etc/schema-registry/schema-registry0.properties
   

   echo "password.encoder.secret=mysecret" >> $CONFLUENT_HOME/etc/schema-registry/schema-registry0.properties
   

3. Add the same lines to the end of schema-registry1.properties:

   echo "resource.extension.class=io.confluent.schema.exporter.SchemaExporterResourceExtension" >> $CONFLUENT_HOME/etc/schema-registry/schema-registry1.properties
   

   echo "kafkastore.update.handlers=io.confluent.schema.exporter.storage.SchemaExporterUpdateHandler" >> $CONFLUENT_HOME/etc/schema-registry/schema-registry1.properties
   

   echo "password.encoder.secret=mysecret" >> $CONFLUENT_HOME/etc/schema-registry/schema-registry1.properties
   

4. Update the port numbers and configs for schema-registry1.properties.

   • Update the listeners port:

     sed -i '' -e "s/8081/8082/g" $CONFLUENT_HOME/etc/schema-registry/schema-registry1.properties
     

   • Update the kafkastore.bootstrap.servers port:

     sed -i '' -e "s/9092/9093/g" $CONFLUENT_HOME/etc/schema-registry/schema-registry1.properties
     

   • Update the kafkastore.topic name. This must be different from the default _schemas in server0.properties so that the registries do not overwrite each other:

     sed -i '' -e "s/kafkastore.topic=_schemas/kafkastore.topic=_schemas1/g" $CONFLUENT_HOME/etc/schema-registry/schema-registry1.properties
     

Configure the Confluent Control Center properties files

In the Control Center properties file, you will use the default ports for bootstrap.servers and zookeeper.connect, but modify and add several other configurations.

KRaft modeZooKeeper mode

1. Copy the default Control Center properties file to use as a basis for a specialized Control Center properties file for this tutorial:

   cp $CONFLUENT_HOME/etc/confluent-control-center/control-center-dev.properties $CONFLUENT_HOME/etc/confluent-control-center/control-center-multi-sr.properties
   

2. Comment out the ZooKeeper configuration:

   sed -i '' -e "s/zookeeper.connect/#zookeeper.connect/g" $CONFLUENT_HOME/etc/confluent-control-center/control-center-multi-sr.properties
   

3. Append the following lines to the end of the file. These update some defaults and add new configurations to match the server and Schema Registry setups in previous steps:

   echo "confluent.controlcenter.kafka.AK1.bootstrap.servers=localhost:9093" >> $CONFLUENT_HOME/etc/confluent-control-center/control-center-multi-sr.properties
   

   echo "confluent.controlcenter.streams.cprest.url=http://0.0.0.0:8090" >> $CONFLUENT_HOME/etc/confluent-control-center/control-center-multi-sr.properties
   

   echo "confluent.controlcenter.kafka.AK1.cprest.url=http://0.0.0.0:8091" >> $CONFLUENT_HOME/etc/confluent-control-center/control-center-multi-sr.properties
   

   echo "confluent.controlcenter.schema.registry.SR-AK1.url=http://localhost:8082" >> $CONFLUENT_HOME/etc/confluent-control-center/control-center-multi-sr.properties
   

Start the clusters

1. (ZooKeeper mode only) Start the ZooKeepers.
2. Start the Confluent Server brokers
3. Start the Schema Registry clusters.
4. Start Confluent Control Center.

(ZooKeeper mode only) Start ZooKeepers

zookeeper-server-start $CONFLUENT_CONFIG/zookeeper0.properties

zookeeper-server-start $CONFLUENT_CONFIG/zookeeper1.properties

Start the Kafka brokers

kafka-server-start $CONFLUENT_CONFIG/server0.properties

kafka-server-start $CONFLUENT_CONFIG/server1.properties

Start Schema Registry clusters

schema-registry-start $CONFLUENT_HOME/etc/schema-registry/schema-registry0.properties

schema-registry-start $CONFLUENT_HOME/etc/schema-registry/schema-registry1.properties

Start Control Center

control-center-start $CONFLUENT_HOME/etc/confluent-control-center/control-center-multi-sr.properties

Create schemas on the source

Create at least two or three schemas in the source environment; at least one of which has a qualified subject name.

1. Create topics and associated schemas in Confluent Control Center (Control Center runs at http://localhost:9021/).

   This will produce schema subjects with the naming scheme <topic>-value. (You cannot create qualified subjects from Control Center. Use the Schema Registry API for this.)

2. Create schemas with both qualified and unqualified subject names, with the syntax: :.<context-name>:<subject-name>.

   • To create a schema with an unqualified subject name, simply provide a name such as coffee or donuts.
   • To create a schema with a qualified subject name in a specified context, use the REST API with the syntax: :.<context-name>:<subject-name>. For example: :.snowcones:sales or :.burgers:locations

   Here is an example of using the Schema Registry API to create a schema with an unqualified subject name. The Schema Registry URL given is for the “source” Schema Registry in our example. The --data path must be the full path to the schema file (test.avro), such as --data @/Users/sam/test.avro.

   curl -v -X POST -H "Content-Type: application/json" --data @/path/to/test.avro  http://localhost:8081/subjects/donuts/versions
   

   The above curl command calls the file that contains this Avro schema.

   {
         "schema":
           "{
                  \"type\": \"record\",
                  \"connect-name\": \"myname\",
                  \"connect-donuts\": \"mydonut\",
                  \"name\": \"test\",
                  \"doc\": \"some doc info\",
                    \"fields\":
                      [
                        {
                          \"type\": \"string\",
                          \"doc\": \"doc for field1\",
                          \"name\": \"field1\"
                        },
                        {
                          \"type\": \"int\",
                          \"doc\": \"doc for field2\",
                          \"name\": \"field2\"
                        }
                      ]
                  }"
        }
   

   The output of this command will be similar to the following:

   *   Trying 127.0.0.1:8081...
   * Connected to localhost (127.0.0.1) port 8081 (#0)
   > POST /subjects/donuts/versions HTTP/1.1
   > Host: localhost:8081
   > User-Agent: curl/8.1.2
   > Accept: */*
   > Content-Type: application/json
   > Content-Length: 682
   >
   < HTTP/1.1 200 OK
   < Date: Mon, 04 Sep 2023 22:38:49 GMT
   < X-Request-ID: e1ec7cfa-c714-4566-97e3-0c26f6557af2
   < Content-Type: application/vnd.schemaregistry.v1+json
   < Vary: Accept-Encoding, User-Agent
   < Content-Length: 8
   <
   * Connection #0 to host localhost left intact
   {"id":1}
   

3. Use the Schema Registry API to list subjects on the source, passing in the prefix.

   curl --silent -X GET <source sr url>/subjects?subjectPrefix=":.<context-name>:<subject-name>" | jq
   

   For example:

   curl --silent -X GET http://localhost:8081/subjects?subjectPrefix=":*:" | jq
   

   Your output should resemble:

   ":.snowcones:sales",
     "coffee-value",
     "donuts"
   

You are ready to create and test exporters for Schema Linking across your two clusters and registries. Run the exporter commands shown below from $CONFLUENT_HOME; that is, from the top level of your Confluent Platform directory.

Create a configuration file for the exporter

Your schema exporter will read the schemas in the SOURCE environment and export linked copies to the destination.

Create ~/config.txt which you will use to create exporters, and fill in the URL the exporter needs to access the DESTINATION cluster:

schema.registry.url=<destination sr url>

Using credentials (optional)

To test a local instance of Confluent Platform for this tutorial, you do not need credentials.

If you want to require authentication, you must first configure Schema Registry for Basic HTTP authentication, and idealy, to also use HTTPS for secure communication.

Once Schema Registry is configured to use basic authentication per the above instructions, you would add credentials to end of your ~/config.txt file as shown:

schema.registry.url=<destination sr url>
basic.auth.credentials.source=USER_INFO
basic.auth.user.info=fred:letmein

The above example, and the required configurations in Schema Registry to support it, are described in the steps to configure Schema Registry for Basic HTTP authentication.

With the credentials in this file, each time you call --config-file ~/config.txt in the commands described below, you would then automatically pass these credentials in along with the Schema Registry URL.

In addition to the parameters for basic HTTP authentication, you can use the config file to pass any of the client configurations described in Clients to Schema Registry.

Tip

To communicate with a source Schema Registry cluster configured with Basic HTTP authentication using the Confluent CLI, you must pass --basic.auth.credentials.source and --basic.auth.user.info with proper credentials, or if you use bearer token authentication, provide credentials in --bearer.auth.credentials.source and --bearer.auth.token flags.

Create the exporter on the source

Use the Confluent Platform CLI to create an exporter on the source.

Create a new exporter using the schema-exporter --create command.

./bin/schema-exporter --create --name <name-of-exporter> --subjects ":*:" \
 --config-file ~/config.txt
 --schema.registry.url <source sr url>

For example, this command creates an exporter called “my-first-exporter” that will export all schemas (":*:"), including those in specific contexts as well as those in the default context:

./bin/schema-exporter --create --name my-first-exporter --subjects ":*:" \
 --config-file ~/config.txt \
 --schema.registry.url  http://localhost:8081/

The following command syntax creates an exporter that exports only the subjects donuts and coffee in a custom context, context1.

schema-exporter --create --name exporter1 --subjects donuts,coffee \
 --context-type CUSTOM --context-name context1 \
 --config-file ~/config.txt \
 --schema.registry.url <source sr url>

More options for exporters

If you used the first example above, then the exporter you just created is relatively basic, in that it just exports everything. As you’ll see in the next section, this is an efficient way to get an understanding of how you might organize, export, and navigate schemas with qualified and unqualified subject names.

Keep in mind that you can create exporters that specify to export only specific subjects and contexts using this syntax:

schema-exporter --create <exporterName> --subjects <subjectName1>,<subjectName2> \
--context-type CUSTOM --context-name <contextName> \
--config-file ~/config.txt

• Replace anything within <> with a name you like.
• subjects are listed as a comma-separated string list, such as “pizzas,sales,customers”.
• subjects, context-type, and context-name are all optional. context-name is specified if context-type is CUSTOM.
• subjects defaults to *, and context-type defaults to AUTO.

Alternatively, if you take all the defaults and do not specify --subjects when you create an exporter, you will get an exporter that exports schemas in all contexts/subjects, including the default context

./bin/schema-exporter --create --name my-first-exporter \
 --config-file ~/config.txt \
 --schema.registry.url  http://localhost:8081/

If you want to export the default context only, specify --subjects to be :.:* With this type of exporter, schemas on the source that have qualified subject names will not be exported to the destination.

Another optional parameter you can use with schema-exporter --create and schema-exporter --update is --subject-format. This specifies a format for the subject name in the destination cluster, and may contain ${subject} as a placeholder which will be replaced with the default subject name. For example, dc_${subject} for the subject orders will map to the destination subject name dc_orders.

You can create and run multiple exporters at once, so feel free to circle back at the end of the Quick Start to create and test more exporters with different parameters.

Verify the exporter is running and view information about it

1. List available exporters.

   ./bin/schema-exporter --list \
    --schema.registry.url <source sr url>
   

   For example:

   ./bin/schema-exporter --list --schema.registry.url http://localhost:8081
   

   Your exporter will show in the list.

   [my-first-exporter]
   

2. Describe the exporter.

   ./bin/schema-exporter --describe --name <exporterName> \
    --schema.registry.url <source sr url>
   

   For example:

   ./bin/schema-exporter --describe --schema.registry.url http://localhost:8081 --name my-first-exporter
   

   Your output should resemble:

   {"name":"my-first-exporter","subjects":[":*:"],"contextType":"AUTO","context":".","config":{"schema.registry.url":"http://localhost:8082"}}
   

3. Get configurations for the exporter.

   ./bin/schema-exporter --get-config --name <exporterName> \
    --schema.registry.url <source sr url>
   

   For example:

   ./bin/schema-exporter --get-config --name my-first-exporter --schema.registry.url http://localhost:8081
   

   Your output should resemble:

   {schema.registry.url=http://localhost:8082}
   

4. Get the status of exporter.

   ./bin/schema-exporter --get-status --name <exporterName> \
    --schema.registry.url <source sr url>
   

   For example:

   ./bin/schema-exporter --get-status --name my-first-exporter --schema.registry.url http://localhost:8081
   

   Your output should resemble:

   {"name":"my-first-exporter","state":"RUNNING","offset":9,"ts":1635890864106}
   

5. Finally, as a check, get a list of schema subjects on the source.

   To do this, use the API call with the subject prefix, as shown:

   curl --silent -X GET http://localhost:8081/subjects?subjectPrefix=":*:" | jq
   

   ":.snowcones:sales",
     "coffee-value",
     "donuts"
   

Check that the schemas were exported

Now that you have verified that the exporter is running, and you know which schemas you created on the source, check to see that your schemas were exported to the destination.

1. Run the following API call to view schema subjects on the destination.

   curl --silent -X GET http://localhost:8082/subjects?subjectPrefix=":*:" | jq
   

   ":.QWE7LDvySmeV6Sg81B3jUg-schema-registry.snowcones:sales",
   ":.QWE7LDvySmeV6Sg81B3jUg-schema-registry:coffee-value",
   ":.QWE7LDvySmeV6Sg81B3jUg-schema-registry:donuts"
   

2. List only schemas in particular contexts.

   curl --silent -X GET '<destination sr url>/subjects?subjectPrefix=:.<context-name>:<subject-name>' | jq
   

   • For example, to find all subjects under the context snowcones on the source, use the following command:

     curl --silent -X GET 'http://localhost:8081/subjects?subjectPrefix=:.snowcones:' | jq
     

     If you have a single subject under the snowcones context, your output will resemble:

     ":.snowcones:sales"
     

   • To list all subjects under the context snowcones on the destination, use the same command syntax. Note that you must include the long IDs at the beginning of subject names on the destination because these are part of the prefixes:

     curl --silent -X GET http://localhost:8082/subjects?subjectPrefix=":.QWE7LDvySmeV6Sg81B3jUg-schema-registry.snowcones:" | jq
     

     Your output will resemble:

     ":.QWE7LDvySmeV6Sg81B3jUg-schema-registry.snowcones:sales"
     

Tip

If you used the optional parameter --subject-format when you created the exporter on the source, check to see that the exported subjects on the destination map to the subject rename format you specified.

Pause the exporter and make changes

1. Pause the exporter.

   Switch back to the SOURCE, and run the following command to pause the exporter.

   ./bin/schema-exporter --pause --name <exporterName> \
    --schema.registry.url <source sr url>
   

   For example:

   ./bin/schema-exporter --pause --name my-first-exporter --schema.registry.url http://localhost:8081
   

   You should get output verifying that the command was successful. For example: Successfully paused exporter my-first-exporter.

   Check the status, just to be sure.

   ./bin/schema-exporter --get-status --name <exporterName> \
    --schema.registry.url <source sr url>
   

   Your output should resemble:

   {"name":"my-first-exporter","state":"PAUSED","offset":9,"ts":1635890864106}
   

2. Reset schema exporter offset, then get the status.

   ./bin/schema-exporter --reset --name <exporterName> \
    --schema.registry.url <source sr url>
   

   For example:

   ./bin/schema-exporter --reset --name my-first-exporter --schema.registry.url http://localhost:8081
   

   The status will show that the offset is reset. For examples:

   Successfully reset exporter my-first-exporter
   

3. Update exporter configurations or information.

   You can choose to update any of subjects, context-type, context-name, or config-file. For example:

   ./bin/schema-exporter --update --name <exporterName> --context-name <newContextName>
   

4. Resume schema exporter.

   ./bin/schema-exporter --resume --name <exporterName> --schema.registry.url <source sr url>
   

   For example:

   ./bin/schema-exporter --resume --name my-first-exporter --schema.registry.url http://localhost:8081
   

   Your output should resemble:

   Successfully resumed exporter my-first-exporter
   

Delete the exporter

When you are ready to wrap up your testing, pause and then delete the exporter(s) as follows.

1. Pause the exporter.

   ./bin/schema-exporter --pause --name <exporterName> \
    --schema.registry.url <source sr url>
   

   For example:

   ./bin/schema-exporter --pause --name my-first-exporter --schema.registry.url http://localhost:8081
   

2. Delete the exporter.

   ./bin/schema-exporter --delete --name <exporterName> \
   --schema.registry.url <source sr url>
   

   For example:

   ./bin/schema-exporter --delete --name my-first-exporter --schema.registry.url http://localhost:8081
   

   Your output should resemble:

   Successfully deleted exporter my-first-exporter
   

This concludes the Quick Start. The next sections are a deep dive into Schema Linking concepts and tools you just tried out.

Schema contexts

What is a schema context?

A schema context, or simply context, is essentially a grouping of subject names and schema IDs. A single Schema Registry cluster can host any number of contexts. Each context can be thought of as a separate “sub-registry”. A context can also be copied to another Schema Registry cluster, using a schema exporter.

How contexts work

Following are a few key aspects of contexts and how they help to organize schemas.

Schemas and schema IDs are scoped by context

Subject names and schema IDs are scoped by context so that two contexts in the same Schema Registry cluster can each have a schema with the same ID, such as 123, or a subject with the same name, such as mytopic-value, without any problem.

To put this another way, subject names and schema IDs are unique per context. You can have schema ID 123 in context .mycontext and schema ID 123 in context .yourcontext and these can be different from one another.

Default context

Any schema ID or subject name without an explicit context lives in the default context, which is represented as a single dot .. An explicit context starts with a dot and can contain any parts separated by additional dots, such as .mycontext.subcontext. You can think of context names as similar to absolute Unix paths, but with dots instead of forward slashes (in this analogy, the default schema context is like the root Unix path). However, there is no relationship between two contexts that share a prefix.

Qualified subjects

A subject name can be qualified with a context, in which case it is called a qualified subject. When a context qualifies a subject, the context must be surrounded by colons. An example is :.mycontext:mysubject. A subject name that is unqualified is assumed to be in the default context, so that mysubject is the same as :.:mysubject (the dot representing the default context).

There are two ways to pass a context to the REST APIs.

• Using a qualified subject
• Using a base context path

Using a qualified subject

A qualified subject can be passed anywhere that a subject name is expected. Most REST APIs take a subject name, such as POST /subjects/{subject}/versions.

There are a few REST APIs that don’t take a subject name as part of the URL path:

• /schemas/ids/{id}
• /schemas/ids/{id}/subjects
• /schemas/ids/{id}/versions

The three APIs above can now take a query parameter named “subject” (written as ?subject), so you can pass a qualified subject name, such as /schemas/ids/{id}?subject=:.mycontext:mysubject, and the given context is then used to look up the schema ID.

Using a base context path

As mentioned, all APIs that specify an unqualified subject operate in the default context. Besides passing a qualified subject wherever a subject name is expected, a second way to pass the context is by using a base context path. A base context path takes the form /contexts/{context} and can be prepended to any existing Schema Registry path. Therefore, to look up a schema ID in a specific context, you could also use the URL /contexts/.mycontext/schemas/ids/{id}.

A base context path can also be used to operate with the default context. In this case, the base context path takes the form “/contexts/:.:/”; for example, /contexts/:.:/schemas/ids/{id}. A single dot cannot be used because it is omitted by some URL parsers.

Multi-Context APIs

All the examples so far operate in a single context. There are three APIs that return results for multiple contexts.

• /contexts
• /subjects
• /schemas?subjectPrefix=:*:

The first two APIs, /contexts and /subjects, return a list of all contexts and subjects, respectively. The other API, /schemas, normally only operates in the default context. This API can be used to query all contexts by passing a subjectPrefix with the value :*:, called the context wildcard. The context wildcard matches all contexts.

Specifying a context name for clients

When using a client to talk to Schema Registry, you may want the client to use a particular context. An example of this scenario is when migrating a client from communicating with one Schema Registry to another. You can achieve this by using a base context path, as defined above. To do this, simply change the Schema Registry URL used by the client from https://<host1> to https://<host2>/contexts/.mycontext.

Note that by using a base context path in the Schema Registry URL, the client will use the same schema context for every Schema Registry request. However, an advanced scenario might involve a client using different contexts for different topics. To achieve this, you can specify a context name strategy to the serializer or deserializer:

• context.name.strategy=com.acme.MyContextNameStrategy

The context name strategy is a class that must implement the following interface:

/**
 * A {@link ContextNameStrategy} is used by a serializer or deserializer to determine
 * the context name used with the schema registry.
 */
public interface ContextNameStrategy extends Configurable {

  /**
   * For a given topic, returns the context name to use.
   *
   * @param topic The Kafka topic name.
   * @return The context name to use
   */
  String contextName(String topic);
}

Again, the use of a context name strategy should not be common. Specifying the base context path in the Schema Registry URL should serve most needs.

Schema Exporters

What is a Schema Exporter?

Previously, Confluent Replicator was the primary means of migrating schemas from one Schema Registry cluster to another, as long as the source Schema Registry cluster was on-premise. To support schema migration using this method, the destination Schema Registry is placed in IMPORT mode, either globally or for a specific subject.

The new schema exporter functionality replaces and extends the schema migration functionality of Replicator. Schema exporters reside within a Schema Registry cluster, and can be used to replicate schemas between two Schema Registry clusters in Confluent Cloud.

Schema Linking

You use schema exporters to accomplish Schema Linking, using contexts and/or qualified subject names to sync schemas across registries. Schema contexts provide the conceptual basis and namespace framework, while the exporter does the heavy-lift work of the linking.

Schemas export from the source default context to a new context on the destination

By default, a schema exporter exports schemas from the default context in the source Schema Registry to a new context in the destination Schema Registry. The destination context (or a subject within the destination context) is placed in IMPORT mode. This allows the destination Schema Registry to use its default context as usual, without affecting any clients of its default context.

The new context created by default in the destination Schema Registry will have the form .lsrc-xxxxxx, taken from the logical name of the source.

Schema Registry clusters can export schemas to each other

Two Schema Registry clusters can each have a schema exporter that exports schemas from the default context to the other Schema Registry. In this setup, each side can read from or write to the default context, and each side can read from (but not write to) the exported context. This allows you to match the setup of Cluster Linking, where you might have a source topic and a read-only mirror topic on each side.

An exporter can copy schemas across contexts in the same Schema Registry

In addition, a schema exporter can copy schemas from one context to another within the same Schema Registry cluster. For example, you might create a “.staging” context, and then later copy the schemas from the “.staging” context to the default context when production-ready. When copying schemas to and from the same Schema Registry cluster, use the special URL local:///.

Customizing schema exports

There are various ways to customize which contexts are exported from the source Schema Registry, and which contexts are used in the destination Schema Registry. The full list of configuration properties is shown below.

How many exporters are allowed per Schema Registry?

The limit on the number of exporters allowed at any one time per Schema Registry is 10.

Configuration options

A schema exporter has these main configuration properties:

name

A unique name for the exporter.

subjects

This can take several forms:

• A list of subject names and/or contexts, for example: [ "subject1", "subject2", ".mycontext1", ".mycontext2" ]
• A singleton list containing a subject name prefix that ends in a wildcard, such as ["mytopic*"]
• A singleton list containing a lone wildcard, ["*"], that indicates all subjects in the default context. This is the default.
• A singleton list containing the context wildcard, [":*:"], that indicates all contexts.

subject-format

This is an optional parameter you can use to specify a format for the subject name in the destination cluster. You can specify ${subject} as a placeholder, which will be replaced with the default subject name. For example, dc_${subject} for the subject orders will map to the destination subject name dc_orders.

context-type

One of:

• AUTO - Prepends the source context with an automatically generated context, which is .lsrc-xxxxxx for Confluent Cloud. This is the default.
• CUSTOM - Prepends the source context with a custom context name, specified in context below.
• NONE - Copies the source context as-is, without prepending anything. This is useful to make an exact copy of the source Schema Registry in the destination.
• DEFAULT - Replaces the source context with the default context. This is useful for copying schemas to the default context in the destination. (Note: DEFAULT is available on Confluent Cloud as of July 2023, and on Confluent Platform starting with version 7.4.2.)

context-name

A context name to be used with the CUSTOM contextType above.

config

A set of configurations for creating a client to talk to the destination Schema Registry, which can be passed in a config file (for example, --config-file  ~/<my-config>.txt). Typically, this includes:

• schema.registry.url - The URL of the destination Schema Registry. This can also be local:/// to allow for more efficient copying if the source and destination are the same.
• basic.auth.credentials.source - Typically “USER_INFO”
• basic.auth.user.info - Typically of the form <api-key>:<api-secret>

System topics and security configurations

The following configurations for system topics are available:

• exporter.config.topic - Stores configurations for the exporters. The default name for this topic is _exporter_configs, and its default/required configuration is: numPartitions=1, replicationFactor=3, and cleanup.policy=compact.
• exporter.state.topic - Stores the status of the exporters. The default name for this topic is _exporter_states, and its default/required configuration is: numPartitions=1, replicationFactor=3, and cleanup.policy=compact.

If you are using role-based access control (RBAC), exporter.config.topic and exporter.state.topic require ResourceOwner on these topics, as does the _schemas internal topic. See also, Use Role-Based Access Control (RBAC) in Confluent Cloud and Configuring Role-Based Access Control for Schema Registry on Confluent Platform.

If you are configuring Schema Registry on Confluent Platform using the Schema Registry Security Plugin, you must activate both the exporter and the Schema Registry security plugin by specifying both extension classes in the $CONFLUENT_HOME/etc/schema-registry/schema-registry.properties files:

resource.extension.class=io.confluent.kafka.schemaregistry.security.SchemaRegistrySecurityResourceExtension,io.confluent.schema.exporter.SchemaExporterResourceExtension

The configuration for the exporter resource extension class in the schema-registry.properties is described in Set up source and destination environments in Schema Linking on Confluent Platform.

Lifecycle and states

Schema Registry stores schemas in a Kafka topic. A schema exporter uses the topic offset to determine its progress.

When a schema exporter is created, it begins in the STARTING state. While in this state, it finds and exports all applicable schemas already written to the topic. After exporting previously registered schemas, the exporter then enters the RUNNING state, during which it will be notified of any new schemas, which it can export if applicable. As schemas are exported, the exporter will save its progress by recording the latest topic offset.

If you want to make changes to the schema exporter, you must first “pause” it, which causes it to enter the PAUSED state. The exporter can then be resumed after the proper changes are made. Upon resumption, the exporter will find and export any applicable schemas since the last offset that it recorded.

While an exporter is paused, it can also be “reset”, which will cause it to clear its saved offset and re-export all applicable schemas when it resumes. To accomplish this, the exporter starts off again in STARTING state after a reset, and follows the same lifecycle.

The states of a schema exporter at various stages in its lifecycle are summarized below.

State	Description
STARTING	The exporter finds and exports all applicable previously registered schemas for the topic. This is the starting state, or the state after a reset.
RUNNING	The exporter is notified of new schemas, exports them if applicable, and tracks progress by recording last topic offset.
PAUSED	An exporter can be paused; for example, to make configuration changes. When it resumes, the exporter finds and exports schemas since the last recorded offset.

REST APIs

Schema Registry supports the following REST APIs, as fully detailed in Exporters in the Schema Registry API documentation:

Task	API
Gets a list of exporters for a tenant	GET /exporters
Creates a new exporter	POST /exporters
Gets info about an exporter	GET /exporters/{name}
Gets the config for an exporter	GET /exporters/{name}/config
Gets the status of an exporter	GET /exporters/{name}/status
Updates the information for an exporter	PUT /exporters/{name}/config
Pauses an exporter	PUT /exporters/{name}/pause
Resumes an exporter	PUT /exporters/{name}/resume
Resets an exporter, clears offsets	PUT /exporters/{name}/reset
Deletes an exporter	DELETE /exporters/{name}

Deployment strategies and Schema Linking

Schema Linking can replicate schemas between Schema Registry clusters as follows:

A schema link sends data from a “source cluster” to a “destination cluster”. The supported cluster types are shown in the table below.

Source Schema Registry Cluster Options	Destination Schema Registry Cluster Options
Confluent Cloud with internet networking	Confluent Cloud with internet networking
Confluent Cloud with internet networking	Confluent Platform 7.0+ with an IP address accessible over the public internet
Confluent Platform 7.0+	Confluent Platform 7.0+
Confluent Platform 7.0+	Confluent Cloud with internet networking

Schema Linking can also be used in both directions between two clusters, allowing each side to continue to receive both reads and writes for schemas.

With regard to Confluent Cloud and Confluent Platform solutions, you would use Schema Linking with Cluster Linking to mirror from one instance to the other. Any use of Confluent Platform in these setups require Confluent Platform 7.0.+ or later.

To learn more about Cluster Linking and mirror topics, see Cluster Linking for Confluent Platform and Geo-replication with Cluster Linking on Confluent Cloud.

Access Control (RBAC) for Schema Linking Exporters

RBAC for Schema Linking is available on Confluent Platform 7.0.9, 7.1.7, 7.2.5, 7.3.2, 7.3.3, 7.4.0, and later versions.

You must set the following property to enforce RBAC for Schema Linking on Confluent Platform: schema.linking.rbac.enable=true. To learn more about this configuration option, see the entry for schema.linking.rbac.enable in Schema Registry Configuration Reference for Confluent Platform.

RBAC role bindings for schema exporters on Confluent Platform are shown below. To learn more, see Role-Based Access Control Predefined Roles and Configure Role-Based Access Control for Schema Registry in Confluent Platform.

Role	All access to exporter endpoints
SystemAdmin	✔
UserAdmin
ClusterAdmin	✔
Operator
SecurityAdmin
ResourceOwner	✔ (only if Subject = * )
DeveloperRead
DeveloperWrite
DeveloperManage

Table Legend:

• ✔ = Yes
• Blank space = No

Note

• If you have schema exporters running, removing permissions for one or more subjects for an account will not prevent that user account from accessing these subjects in the DESTINATION if the DESTINATION Schema Registry is different from the source. Therefore, as a precaution you should also remove permissions for these subjects for the account in the DESTINATION Schema Registry.
• The schema exporter will stop running if permissions are removed from the DESTINATION Schema Registry for the account that created the schema exporter.
• If you want to grant permissions to specific schema contexts, you can do so using the Prefix rule and grant permissions with prefix as :.schema_context:*.
• RBAC is the only way to implement access control for Schema Linking. The Schema Registry ACL Authorizer for Confluent Platform for implementing ACLs does not support schema exporters.

Related content

• Exporters in the Schema Registry API Reference
• Schema Linking on Confluent Cloud