Control Center Configuration Reference for Confluent Platform¶

The following settings are available for configuring Control Center.

Confluent Control Center includes several sample configuration (.properties) files in the following directory: $CONFLUENT_HOME/etc/confluent-control-center For a list of sample configuration files, see Control Center Configuration Examples for Confluent Platform.

Search reference¶

Confluent Control Center groups settings into categories. You can search and filter by configuration property name.

Base settings¶

This section includes base settings for Control Center.

bootstrap.servers¶

A list of host/port pairs to use for establishing the initial connection to the Apache Kafka® cluster. The client will make use of all servers irrespective of which servers are specified here for bootstrapping; this list only impacts the initial hosts used to discover the full set of servers. This list should be in the form host1:port1,host2:port2,.... Since these servers are just used for the initial connection to discover the full cluster membership (which could change dynamically), this list need not contain the full set of servers (you may want more than one, though, in case a server is down).

Type: list
Default: localhost:9092
Importance: high

confluent.license¶

Confluent issues an enterprise license key to each subscriber, allowing the subscriber to unlock the full functionality of Control Center. The license key is text that you can copy and paste. Paste the license key as the value for confluent.license. You can also manage the license in the Control Center web interface.

A trial license allows using for a 30-day trial period. A developer license allows using Control Center and other Confluent Platform proprietary components indefinitely for single-broker development environments. Trial and developer licenses are shipped with Confluent Platform.

See Manage Confluent Platform Licenses Using Control Center for more details.

If you are a subscriber, contact Confluent Support for more information about obtaining another valid enterprise license before it expires. confluent.controlcenter.license is a deprecated synonym for this configuration key.

Type: string
Default: “”
Importance: high

confluent.controlcenter.rest.csrf.prevention.enable¶

When enabled, uses a token-based system to help prevent Cross-Site Request Forgery (CSRF). CSRF is a malicious exploit that can result in an end user executing unwanted actions on a web application in which they’re currently authenticated. If the target user has an administrative account, CSRF can compromise the entire web application.

Type: boolean
Default: false
Importance: medium

confluent.controlcenter.rest.csrf.prevention.token.expiration.minutes¶

Sets the CSRF prevention token expiration time, if CSRF prevention is enabled. The default expiration time should be sufficient for most use cases, however you can use this setting to increase or decrease the token expiration interval time if needed.

Type: int
Default: 30
Importance: low

confluent.controlcenter.rest.thread.pool.max¶

The maximum number of threads that will be started for the HTTP Servlet server.

Type: int
Default: 200
Importance: low

confluent.controlcenter.rest.thread.pool.min¶

The minimum number of threads that will be started for the HTTP Servlet server.

Type: int
Default: 8
Importance: low

Production Settings¶

In production, you should run Control Center in a cluster that is separate from the Kafka clusters being monitored. Set the following configuration parameters in the Control Center properties file.

confluent.controlcenter.streams.statestore.cache.max.bytes¶

Maximum number of memory bytes used for record caches across all threads.

Tip

Consider setting this config value proportional to the total num.partitions. Here is an example computation:

Each per-partition metric is stored as a key-value pair that consists of “topic-string, partition-id, cluster-name”. Control Center compacts the values as four long variables, recording the min, max, count, and total.
X is the total topic partitions and seven per-partition metrics that Control Center collects.
Twelve threads by default.

The total cache size should be:

X (topic partitions) * 7 (per-partition metrics) * 12 (number of threads) * 150 (average bytes per metric).

For example, with 100000 topic partitions, the cache size should be 1,260,000,000 bytes.

Type:
Default: 1,073,741,824 bytes
Importance: high

confluent.controlcenter.kafka.<name>.bootstrap.servers¶

Bootstrap servers for any additional Kafka cluster being monitored. Replace <name> with the name Control Center should use to identify this cluster. For example, using confluent.controlcenter.kafka.production-nyc.bootstrap.servers, Control Center will show the additional cluster with the name production-nyc in the cluster list.

Type: list
Default: “”
Importance: high

confluent.controlcenter.kafka.<name>.<connection config>¶

Any additional connection configuration required to connect to the Kafka cluster identified by <name> can be specified using the confluent.controlcenter.kafka.<name>. prefix. For example, to specify the security.protocol=SASL_SSL configuration for the cluster named production-nyc, add confluent.controlcenter.kafka.production-nyc.security.protocol=SASL_SSL to the configuration.

Importance: medium

Tip

If you are configuring a multi-cluster deployment, see also confluent.controlcenter.streams.name.cprest.url.

Mode settings¶

Use this optional setting to specify the mode that Confluent Control Center starts in. By default, Control Center starts in Normal mode, meaning all is specified, and monitoring is enabled.

confluent.controlcenter.mode.enable¶

Set the mode in which Control Center should be started. Valid values are all, meaning Confluent Control Center operates normally, and management meaning Confluent Control Center uses less infrastructure to operate. In Reduced infrastructure mode, Control Center is used to manage Kafka clusters only and will not display monitoring or metrics information.

Use this setting to specify the mode that Confluent Control Center starts in. By default, Control Center starts in Normal mode, meaning all is specified, and monitoring is enabled.

Type: string
Default: all
Importance: high

General settings¶

General settings for Control Center are optional.

confluent.controlcenter.connect.<connect-cluster-name>.cluster¶

Comma-separated list of Kafka Connect worker URLs for the Connect cluster specified by <connect-cluster-name>. <connect-cluster-name can be an arbitrary string used to identify individual connect clusters and does not need to correspond to any worker setting. Control Center will connect to a single worker. If a worker fails, Control Center will try the request against a different worker. This must be set if you want to manage a Connect cluster. The URL should include the protocol (HTTP or HTTPS) and its associated port (8083 or 8443 respectively).

Type: list
Default: “”
Importance: high
Example HTTP: confluent.controlcenter.connect.myconnectclustername.cluster=http://localhost:8083

confluent.controlcenter.connect.healthcheck.endpoint¶

Provides the default discovery path for connect clusters. If you are using the community version of Confluent Platform, set this property to /connectors to display the connect clusters in Control Center.

Type: string
Default: /v1/metadata/id
Importance: high

confluent.controlcenter.connect.cluster¶

Deprecated since Confluent Platform version 6.2. Comma-separated list of Connect worker URLs within a single cluster. This is deprecated by confluent.controlcenter.connect.<connect-cluster-name>.cluster.

Type: list
Default: “”
Importance: low

confluent.controlcenter.data.dir¶

Location for Control Center-specific data. Although the data stored in this directory can be recomputed, doing so is expensive and can affect the availability of Control Center’s stream monitoring functionality. For production, you should set this to a durable, writable, and secure location.

Type: path
Default: /var/lib/confluent-control-center (control-center-production.properties)
Default: /tmp/confluent/control-center (control-center.properties, control-center-dev.properties, control-center-minimal.properties)
Importance: high

confluent.controlcenter.rest.listeners¶

Comma-separated list of listeners that listen for API requests over either http or https. If a listener uses https, the appropriate TLS/SSL configuration parameters need to be set as well. The first value will be used as a Control Center link in the body of eligible alert emails sent from Control Center. For details, see Alerts history.

Type: list
Default: http://0.0.0.0:9021
Importance: high

confluent.controlcenter.rest.advertised.url¶

Externally visible host. Control Center uses this as an override to rest.listeners when generating URLs for external communications such as alert emails.

Type: string
Default: “”
Importance: low

confluent.controlcenter.rest.access.control.allow.origin¶

Sets the value for Jetty Access-Control-Allow-Origin header.

Type: string
Default: “”
Importance: low

confluent.controlcenter.rest.response.http.headers.config¶

Use to select which HTTP headers are returned in the HTTP response for Confluent Platform components. Specify multiple values in a comma-separated string using the format [action][header name]:[header value] where [action] is one of the following: set, add, setDate, or addDate. You must use quotation marks around the header value when the header value contains commas. For example:

response.http.headers.config="add Cache-Control: no-cache, no-store, must-revalidate", add X-XSS-Protection: 1; mode=block, add Strict-Transport-Security: max-age=31536000; includeSubDomains, add X-Content-Type-Options: nosniff

Type: string
Default: “”
Importance: low

confluent.controlcenter.streams.cprest.url¶

Defines the REST endpoints for Control Center to enable HTTP servers on the broker(s). A comma-separated list with multiple values can be provided for a multi-broker cluster.

For examples, see Configure Control Center with REST endpoints and advertised listeners, Required Configurations for Control Center, and Self-Balancing Clusters documentation.

Type: list
Default: http://localhost:8090
Importance: high

To configure multiple clusters, see confluent.controlcenter.kafka.name.cprest.url.

confluent.controlcenter.kafka.<name>.cprest.url¶

Defines the REST endpoints for any additional Kafka clusters being monitored by Control Center to enable HTTP servers on the broker(s). Replace <name> with the name that identifies this cluster. This name should be consistent with the Kafka cluster name used for other Control Center configurations. A comma-separated list with multiple values can be provided for a multi-broker cluster.

Note that if the REST API endpoints are secured with TLS, you must include additional properties in the Confluent Control Center properties file that provide the security information. For more information, see Configure TLS for Control Center as a server and TLS settings for web access.

The following example shows REST endpoint settings for three clusters or data centers (dc1, dc2, and dc3):

confluent.controlcenter.streams.cprest.url=https://dc1:8090
confluent.controlcenter.kafka.dc2.cprest.url=https://dc2:8090
confluent.controlcenter.kafka.dc3.cprest.url=https://dc3:8090

Type: list
Default: “”
Importance: high

For an example of configuring the Control Center cprest.url specifically for multiple clusters, see Enabling Multi-Cluster Schema Registry.

confluent.controlcenter.schema.registry.url¶

Schema Registry URL. For more information and examples, see the Schema Registry Documentation and configuration steps for Enabling Multi-Cluster Schema Registry.

Type: list
Default: http://localhost:8081
Importance: high

confluent.controlcenter.id¶

Identifier used as a prefix so that multiple instances of Control Center can co-exist.

Type: string
Default: “1”
Importance: low

confluent.controlcenter.name¶

Control Center Name

Type: string
Default: _confluent-controlcenter-7.6.3
Importance: low

confluent.controlcenter.internal.topics.partitions¶

Number of partitions used internally by Control Center.

Type: int
Default: 12
Importance: low

confluent.controlcenter.internal.topics.replication¶

Replication factor used internally by Control Center. It is not recommended to reduce this value except in a development environment.

Type: int
Default: 3
Importance: low

confluent.controlcenter.internal.topics.retention.ms¶

Maximum time in milliseconds that internal data is stored in Kafka. For more information, see data retention.

Type: long
Default: 604,800,000 (7 days)
Importance: low

confluent.controlcenter.internal.topics.changelog.segment.bytes¶

Segment size in bytes for internal changelog topics in Kafka. This must be as small as broker settings log.cleaner.dedupe.buffer.size / log.cleaner.threads to guarantee enough space in the broker’s dedupe buffer for compaction to work.

Type: long
Default: 134,217,728
Importance: low

confluent.metrics.topic¶

Topic from which metrics data will be read. For multiple instances of Control Center using the same Kafka cluster for monitoring purposes, it may be helpful to use separate metrics and command topics (if each Control Center installation is monitoring different Kafka clusters).

Type: string
Default: _confluent-metrics
Importance: low

confluent.metrics.topic.retention.ms¶

Maximum time in milliseconds that metrics data is stored in Kafka. For more information, see data retention.

Type: long
Default: 259,200,000 (3 days)
Importance: low

confluent.metrics.topic.replication¶

Replication factor for metrics topic. It is not recommended to reduce this value except in a development environment.

Type: int
Default: 3
Importance: low

confluent.metrics.topic.partitions¶

Partition count for metrics topic.

Type: int
Default: 12
Importance: low

confluent.metrics.topic.skip.backlog.minutes¶

Skip backlog older than x minutes ago for broker metrics data. Set this to 0 if you want to process from the latest offsets. This config overrides confluent.controlcenter.streams.consumer.auto.offset.reset (deprecated) for the metrics input topic.

Type: long
Default: 15

confluent.controlcenter.disk.skew.warning.min.bytes¶

Threshold for the max difference in disk usage across all brokers before disk skew warning is published.

Type: long
Default: 1,073,741,824
Importance: low

confluent.controlcenter.max.trigger.events.per.alert.config¶

The maximum number of trigger events in one alert.

Type: int
Default: 1,000
Importance: low

confluent.controlcenter.alert.cluster.down.autocreate¶

Auto create a trigger and an email action for Control Center’s cluster down alerts. For more information, see Control Center cluster down status.

Type: boolean
Default: false
Importance: low

confluent.controlcenter.alert.cluster.down.to.email¶

Email to send alerts to when Control Center’s cluster is down.

Type: string
Default: “”
Importance: low

confluent.controlcenter.alert.cluster.down.to.webhookurl.slack¶

The Slack webhook URL to post alerts to when Control Center’s cluster is down.

Type: string
Default: “”
Importance: low

confluent.controlcenter.alert.cluster.down.to.pagerduty.integration.key¶

The PagerDuty integration key to post alerts to a certain service when Control Center’s cluster is down.

Type: string
Default: “”
Importance: low

confluent.controlcenter.alert.cluster.down.send.rate¶

Send rate per hour for auto-created cluster down alerts. Default: 12 times per hour (every 5 minutes).

Type: int
Default: 12
Importance: low

confluent.controlcenter.ui.data.expired.threshold¶

Configure a threshold (in seconds) before data is considered out of date. Default: 120 seconds (2 minutes).

Type: int
Default: 120
Importance: low

confluent.controlcenter.service.healthcheck.interval.sec¶

The interval (in seconds) used for checking the health of Confluent Platform nodes. This includes ksqlDB, Connect, Schema Registry, REST Proxy, and Metadata Service (MDS).

Type: int
Default: 20
Importance: low

confluent.controlcenter.request.buffer.size.bytes¶

Allows adjustment of the RequestBuffer size of HttpClient.

Type: int
Default: 10,000
Importance: low

confluent.controlcenter.topic.inspection.max.message.bytes¶

Maximum size of messages to display on the Messages page for a topic. Messages larger than this value are suppressed and an error (MESSAGE_TOO_BIG_FOR_UI) is shown. Metadata is displayed even if the the message is suppressed.

Large messages can slow down or crash the Messages page.

Type: long
Default: 1048576 (1 Mb)
Importance: low

confluent.controlcenter.one.minute.rollup.topics.retention.ms¶

The retention period, in milliseconds, for one-minute aggregated metrics topics. Default: 345,600,000 milliseconds (4 days).

To change the default value, append a new value in milliseconds to the property, then increment confluent.controlcenter.id and restart Confluent Control Center. For example, confluent.controlcenter.one.minute.rollup.topics.retention.ms=864000000

The minimum retention of roll up is 60000 (one minute).

Type: long
Default: 345600000
Importance: low

confluent.controlcenter.three.hour.rollup.topics.retention.ms¶

The retention period, in milliseconds, for three-hour aggregated metrics topics. Default: 60,566,400,000 milliseconds (701 days).

To change the default value, append the new value in milliseconds to the property, then increment confluent.controlcenter.id and restart Confluent Control Center. For example, confluent.controlcenter.three.hour.rollup.topics.retention.ms=864000000

The minimum retention of roll up is 10800000 (three hours).

Type: long
Default: 60566400000
Importance: low

Broker UI settings¶

Starting with Confluent Platform version 7.0.0, Control Center uses an embedded REST proxy and as a result provides an updated UI to display broker settings. These settings are optional.

confluent.controlcenter.embedded.kafkarest.enable¶

Enables or disables the use of an embedded REST proxy for Control Center, which must be enabled for Confluent Control Center to display the new broker settings UI. Starting with Confluent Platform version 7.0.0, Control Center uses an embedded REST proxy and as a result provides an updated UI to display broker settings. The new settings UI is enabled by default, but you can revert back to the old view with this setting and confluent.controlcenter.ui.brokersettings.kafkarest.enable.

Type: boolean
Default: true
Importance: low

confluent.controlcenter.ui.brokersettings.kafkarest.enable¶

Enables or disables new broker settings UI. This setting will be forced to false if confluent.controlcenter.embedded.kafkarest.enable is also false.

Type: boolean
Default: true
Importance: low

Monitoring settings¶

These optional settings are for consumption and end-to-end latency monitoring. The default settings work for the majority of use cases and scales.

confluent.monitoring.interceptor.topic¶

The Kafka topic that stores monitoring interceptor data. This setting must match the confluent.monitoring.interceptor.topic configuration used by the interceptors in your application. Usually you should not change this setting unless you are running multiple instances of Control Center with client monitoring interceptor data being reported to the same Kafka cluster.

Type: string
Default: _confluent-monitoring
Importance: high

confluent.monitoring.interceptor.topic.partitions¶

Number of partitions for the monitoring interceptor data topic.

Type: int
Default: 12
Importance: low

confluent.monitoring.interceptor.topic.replication¶

Replication factor for monitoring topic. It is not recommended to reduce this value except in a development environment.

Type: int
Default: 3
Importance: low

confluent.monitoring.interceptor.topic.retention.ms¶

Maximum time in milliseconds that interceptor data is stored in Kafka. For more information, see data retention.

Type: long
Default: 259,200,000 (3 days)
Importance: low

confluent.monitoring.interceptor.topic.skip.backlog.minutes¶

Skip backlog older than x minutes ago for monitoring interceptor data. Set this to 0 if you want to process from the latest offsets. This config overrides confluent.controlcenter.streams.consumer.auto.offset.reset (deprecated) for the monitoring input topic.

Type: long
Default: 15
Importance: low

Basic Authentication settings for web access¶

These optional settings allow you to enable and configure authentication for accessing the Control Center web interface. See the UI Authentication guide for more details on configuring authentication.

confluent.controlcenter.rest.authentication.method¶

Authentication method to use. Available options: NONE, BASIC, BEARER.

Important

When RBAC is enabled in Control Center, the method must be BEARER. For more information, see Configure RBAC for Control Center on Confluent Platform.

Type: string
Default: NONE
Importance: low

confluent.controlcenter.rest.authentication.realm¶

Realm to be used by Control Center when authenticating.

Type: string
Default: “”
Importance: low

confluent.controlcenter.rest.authentication.roles¶

Roles that are authenticated to access Control Center.

Type: string
Default: *
Importance: low

confluent.controlcenter.auth.restricted.roles¶

Specify a list of roles with limited read-only access. You must include roles added here in confluent.controlcenter.rest.authentication.roles. For users that are members of roles included in this list, the following features and options are unavailable:

Add, delete, pause, or resume connectors
Browse connectors
View connector settings
Upload connector configs
Create, delete, or edit alerts (triggers or actions)
Edit a license
Edit brokers
Press submit on cluster forms
Edit, create, or delete schemas
Edit data flow queries
Inspect topics
Type in the KSQL editor
Run or stop ksqlDB querie
Add ksqlDB streams or table

For fine-grained access control, consider configuring role-based access control (RBAC).

Type: list
Default: “”
Importance: low

confluent.controlcenter.auth.session.expiration.ms¶

Timeout in milliseconds after which a user session will have to be re-authenticated with the authentication service (e.g. LDAP). Defaults to 0, which means authentication is done for every request. Increase this value to avoid calling the LDAP service for each request.

Type: long
Default: 0
Importance: low

TLS settings for web access¶

Configure the following optional properties to secure web access (HTTPS) to Control Center with TLS.

To configure TLS settings when Control Center acts as a proxy server to other Confluent Platform components, see Configure TLS for Control Center on Confluent Platform.

confluent.controlcenter.rest.listeners¶

Comma-separated list of listeners that listen for API requests over either http or https. If a listener uses https, the appropriate TLS/SSL configuration parameters need to be set as well. The first value will be used as a Control Center link in the body of eligible alert emails sent from Control Center. For details, see Alerts history.

Type: list
Default: http://0.0.0.0:9021
Importance: high

confluent.controlcenter.rest.ssl.keystore.location¶

Used for HTTPS. Location of the keystore file to use for TLS.

Important

Jetty requires that the key’s CN stored in the keystore must match the FQDN.

Type: string
Default: “”
Importance: high

confluent.controlcenter.rest.ssl.keystore.password¶

Used for HTTPS. The store password for the keystore file.

Type: password
Default: “”
Importance: high

confluent.controlcenter.rest.ssl.key.password¶

Used for HTTPS. The password of the private key in the keystore file.

Type: password
Default: “”
Importance: high

confluent.controlcenter.rest.ssl.truststore.location¶

Used for HTTPS. Location of the truststore. Required only to authenticate HTTPS clients.

Type: string
Default: “”
Importance: high

confluent.controlcenter.rest.ssl.truststore.password¶

Used for HTTPS. The store password for the truststore file.

Type: password
Default: “”
Importance: high

confluent.controlcenter.rest.ssl.keystore.type¶

Used for HTTPS. The type of keystore file.

Type: string
Default: JKS
Importance: medium

confluent.controlcenter.rest.ssl.truststore.type¶

Used for HTTPS. The type of truststore file.

Type: string
Default: JKS
Importance: medium

confluent.controlcenter.rest.ssl.protocol¶

Used for HTTPS. The TLS protocol used to generate the SSLContext. The default is TLSv1.3 when running with Java 11 or newer, TLSv1.2 otherwise. This value should be fine for most use cases. Allowed values in recent JVMs are TLSv1.2 and TLSv1.3. TLS, TLSv1.1, SSL, SSLv2 and SSLv3 might be supported in older JVMs, but their usage is discouraged due to known security vulnerabilities. With the default value for this configuration and ssl.enabled.protocols, clients downgrade to TLSv1.2 if the server does not support TLSv1.3. If this configuration is set to TLSv1.2, clients do not use TLSv1.3, even if it is one of the values in ssl.enabled.protocols and the server only supports TLSv1.3.

Type: string
Default: TLSv1.3
Importance: medium

confluent.controlcenter.rest.ssl.provider¶

Used for HTTPS. The TLS security provider name. Leave blank to use the defaults for Jetty.

Type: string
Default: “” (Jetty default)
Importance: medium

confluent.controlcenter.rest.ssl.client.auth¶

Deprecated. Used for HTTPS. Whether to require the HTTPS client to authenticate using the server’s truststore. This is deprecated by confluent.controlcenter.rest.ssl.client.authentication.

Type: boolean
Default: false
Importance: medium

confluent.controlcenter.rest.ssl.client.authentication¶

Used for HTTPS. Valid values: NONE, REQUESTED or REQUIRED. NONE disables TLS client authentication, REQUESTED requests but doesn’t require TLS client authentication, and REQUIRED requires HTTPS clients to authenticate using the server’s truststore. This config overrides confluent.controlcenter.rest.ssl.client.auth (deprecated).

Type: string
Default: NONE
Importance: medium

confluent.controlcenter.rest.ssl.enabled.protocols¶

Used for HTTPS. Leave blank ("") to use the Jetty default. The comma-separated list of protocols enabled for TLS connections. The default value is TLSv1.2,TLSv1.3 when running with Java 11 or later, TLSv1.2 otherwise. With the default value for Java 11 (TLSv1.2,TLSv1.3), Kafka clients and brokers prefer TLSv1.3 if both support it, and falls back to TLSv1.2 otherwise (assuming both support at least TLSv1.2).

Type: list
Default: “” (Jetty default)
Importance: medium

confluent.controlcenter.rest.ssl.keymanager.algorithm¶

Used for HTTPS. The algorithm used by the key manager factory for TLS connections. Leave blank to use the Jetty default.

Type: string
Default: “” (Jetty default)
Importance: low

confluent.controlcenter.rest.ssl.trustmanager.algorithm¶

Used for HTTPS. The algorithm used by the trust manager factory for TLS connections. Leave blank to use the Jetty default.

Type: string
Default: “” (Jetty default)
Importance: low

confluent.controlcenter.rest.ssl.cipher.suites¶

A comma-separated list of TLS cipher suites used for HTTPS. Leave blank to use the Jetty default or specify any combination of the following suites:

TLS_AES_256_GCM_SHA384
TLS_CHACHA20_POLY1305_SHA256
TLS_AES_128_GCM_SHA256
TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256
TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256
TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256

Using another cipher suite name causes Confluent Control Center to fail to start. Ciphers listed here are not supported. Do not use them.

Type: list
Default: “” (Jetty default)
Importance: low

confluent.controlcenter.rest.ssl.endpoint.identification.algorithm¶

Used for HTTPS. The endpoint identification algorithm to validate the server hostname using the server certificate. Leave blank to use the Jetty default.

Type: string
Default: https
Importance: low

confluent.controlcenter.use.default.jvm.truststore¶

Enable Control Center to fallback to use the default JVM trust store.

Type: string
Default: false
Importance: low

confluent.controlcenter.use.default.os.truststore¶

Enable Control Center to fallback to use the default operating system trust store.

Type: string
Default: false
Importance: low

Security for Confluent Platform components settings¶

The following optional settings control TLS encryption between Control Center and Confluent Platform components or features. You can also configure Basic authentication for Schema Registry.

You should configure these settings if you have configured your Kafka cluster with these security features. For TLS, you can choose to configure each component separately, or set a single store.

Streams
Schema Registry
Connect
ksqlDB
Single proxy server store security settings

Streams security settings¶

These optional settings are the standard Kafka authentication and authorization settings prefixed with confluent.controlcenter.streams..

confluent.controlcenter.streams.security.protocol¶

Protocol used to communicate with brokers. Valid values are: PLAINTEXT, SSL, SASL_PLAINTEXT, and SASL_SSL.

Type: string
Default: PLAINTEXT
Importance: low

confluent.controlcenter.streams.ssl.keystore.location¶

The location of the keystore file.

Type: string
Default: “”
Importance: low

confluent.controlcenter.streams.ssl.keystore.password¶

The store password for the keystore file.

Type: string
Default: “”
Importance: low

confluent.controlcenter.streams.ssl.key.password¶

The password of the private key in the keystore file.

Type: string
Default: “”
Importance: low

confluent.controlcenter.streams.ssl.truststore.location¶

The location of the truststore file.

Type: string
Default: “”
Importance: low

confluent.controlcenter.streams.ssl.truststore.password¶

The password for the truststore file.

Type: string
Default: “”
Importance: low

confluent.controlcenter.streams.sasl.mechanism¶

SASL mechanism used for client connections. This may be any mechanism for which a security provider is available. GSSAPI is the default mechanism.

Type: string
Default: GSSAPI
Importance: low

confluent.controlcenter.streams.sasl.kerberos.service.name¶

The Kerberos principal name that Kafka runs as. This can be defined either in Kafka’s JAAS config or in Kafka’s config.

Type: string
Default: null
Importance: low

Schema Registry security settings¶

These Schema Registry settings are optional. To enable TLS for Schema Registry, specify the following set of properties:

confluent.controlcenter.schema.registry.schema.registry.ssl.truststore.location
confluent.controlcenter.schema.registry.schema.registry.ssl.truststore.password
confluent.controlcenter.schema.registry.schema.registry.ssl.keystore.location
confluent.controlcenter.schema.registry.schema.registry.ssl.keystore.password
confluent.controlcenter.schema.registry.schema.registry.ssl.key.password
confluent.controlcenter.schema.registry.schema.registry.alias.name

confluent.controlcenter.schema.registry.basic.auth.credentials.source¶

Defines how to select the credentials for HTTP Basic Authentication header for a single Schema Registry cluster, or the first Schema Registry in a multi-cluster Schema Registry deployment. The supported values are URL, USER_INFO, and SASL_INHERIT.

Type: string
Default: URL
Importance: medium

Note

Specifying control.center.schema.registry.basic.auth.credentials.source, as shown, passes basic.auth.credentials.source to the Schema Registry client.

confluent.controlcenter.schema.registry.<sr-cluster-name>.basic.auth.credentials.source¶

Defines how to pick the credentials for HTTP Basic Authentication header on a Schema Registry cluster in a multi-cluster Schema Registry deployment. The supported values are URL, USER_INFO, and SASL_INHERIT.

Type: string
Default: URL
Importance: medium

confluent.controlcenter.schema.registry.basic.auth.user.info¶

Specifies the user credentials for HTTP Basic Authentication in the form of {username}:{password} for a single Schema Registry cluster, or the first Schema Registry cluster in a multi-cluster Schema Registry deployment.

Type: string
Default: “”
Importance: medium

confluent.controlcenter.schema.registry.<sr-cluster-name>.basic.auth.user.info¶

Specifies the user credentials for HTTP Basic Authentication in the form of <username>:<password> for Schema Registry clusters in a multi-cluster Schema Registry deployment (associated with the URL fields by <sr-cluster-name>).

Type: string
Default: “”
Importance: medium

confluent.controlcenter.schema.registry.schema.registry.ssl.truststore.location¶

The location of the truststore file for Schema Registry.

Type: string
Default: “”
Importance: low

confluent.controlcenter.schema.registry.schema.registry.ssl.truststore.password¶

The password for the truststore file for Schema Registry.

Type: string
Default: “”
Importance: low

confluent.controlcenter.schema.registry.schema.registry.ssl.keystore.location¶

The location of the keystore file for Schema Registry.

Type: string
Default: “”
Importance: low

confluent.controlcenter.schema.registry.schema.registry.ssl.keystore.password¶

The store password for the keystore file for Schema Registry.

Type: string
Default: “”
Importance: low

confluent.controlcenter.schema.registry.schema.registry.ssl.key.password¶

The password of the private key in the keystore file for Schema Registry.

Type: string
Default: “”
Importance: low

confluent.controlcenter.schema.registry.schema.registry.alias.name¶

Specifies an alias for the certificate Schema Registry uses during mTLS. Use the following format to specify <Certificate-Alias> as an alias.

confluent.controlcenter.schema.registry.schema.registry.alias.name=<Certificate-Alias>

If you have multiple trustStores, each certificate should have a unique alias, even if you are using the same certificate for multiple connections.

Type: string
Default: “”
Importance: low

Connect security settings¶

These Connect settings are optional. To enable TLS for Connect, specify the following set of properties:

confluent.controlcenter.connect.connect.ssl.truststore.location
confluent.controlcenter.connect.connect.ssl.truststore.password
confluent.controlcenter.connect.connect.ssl.keystore.location
confluent.controlcenter.connect.connect.ssl.keystore.password
confluent.controlcenter.connect.connect.ssl.key.password
confluent.controlcenter.connect.connect.alias.name

confluent.controlcenter.connect.<connect-cluster-name>.basic.auth.user.info¶

Specifies the user credentials for Control Center to communicate with a Connect cluster configured for HTTP Basic Authentication. The name of the Connect cluster appears in the configuration (<connect-cluster-name>) and credentials use this form: <username>:<password>

Without this configuration for Connect clusters using HTTP Basic Authentication, Control Center cannot display Connectors in the cluster. For more information, see Control Center and other components.

Tip

Versions of Control Center prior to 7.2 did not require this configuration. If you are upgrading and using HTTP Basic Authentication with Connect, you must use this configuration.

Type: string
Default: “”
Importance: medium

confluent.controlcenter.connect.connect.ssl.truststore.location¶

The location of the truststore file for Connect.

Type: string
Default: “”
Importance: low

confluent.controlcenter.connect.connect.ssl.truststore.password¶

The stored password for the truststore for Connect.

Type: string
Default: “”
Importance: low

confluent.controlcenter.connect.connect.ssl.keystore.location¶

The location of the keystore file for Connect.

Type: string
Default: “”
Importance: low

confluent.controlcenter.connect.connect.ssl.keystore.password¶

The store password for the keystore file for Connect.

Type: string
Default: “”
Importance: low

confluent.controlcenter.connect.connect.ssl.key.password¶

The password of the private key in the keystore file for Connect.

Type: string
Default: “”
Importance: low

confluent.controlcenter.connect.connect.alias.name¶

Specifies an alias for the certificate Connect uses during mTLS. Use the following format to specify <Certificate-Alias> as an alias.

confluent.controlcenter.connect.connect.alias.name=<Certificate-Alias>

If you have multiple trustStores, each certificate should have a unique alias, even if you are using the same certificate for multiple connections.

Type: string
Default: “”
Importance: low

ksqlDB security settings¶

These ksqlDB settings are optional. To enable TLS for ksqlDB, specify the following set of properties:

confluent.controlcenter.ksql.ksql.ssl.truststore.location
confluent.controlcenter.ksql.ksql.ssl.truststore.password
confluent.controlcenter.ksql.ksql.ssl.keystore.location
confluent.controlcenter.ksql.ksql.ssl.keystore.password
confluent.controlcenter.ksql.ksql.ssl.key.password
confluent.controlcenter.ksql.ksql.alias.name

confluent.controlcenter.ksql.<ksql-cluster-name>.basic.auth.user.info¶

Specifies the user credentials for HTTP Basic Authentication in the form of <username>:<password> for ksqlDB clusters associated with the URL fields by <ksqldb-cluster-name>.

Type: string
Default: “”
Importance: medium

confluent.controlcenter.ksql.ksql.ssl.truststore.location¶

The location of the truststore file for ksqlDB.

Type: string
Default: “”
Importance: low

confluent.controlcenter.ksql.ksql.ssl.truststore.password¶

The stored password for the truststore file for ksqlDB.

Type: string
Default: “”
Importance: low

confluent.controlcenter.ksql.ksql.ssl.keystore.location¶

The location of the keystore file for ksqlDB.

Type: string
Default: “”
Importance: low

confluent.controlcenter.ksql.ksql.ssl.keystore.password¶

The stored password for the keystore file for ksqlDB.

Type: string
Default: “”
Importance: low

confluent.controlcenter.ksql.ksql.ssl.key.password¶

The password of the private key in the keystore file for ksqlDB.

Type: string
Default: “”
Importance: low

confluent.controlcenter.ksql.ksql.alias.name¶

Specifies an alias for the certificate ksqlDB uses during mTLS. Use the following format to specify <Certificate-Alias> as an alias.

confluent.controlcenter.ksql.ksql.alias.name=<Certificate-Alias>

If you have multiple trustStores, each certificate should have a unique alias, even if you are using the same certificate for multiple connections.

Type: string
Default: “”
Importance: low

Single proxy server store security settings¶

Instead of specifying TLS settings for each component, you have the option to specify that Confluent Control Center use a single proxy server truststore and keystore that contain all the TLS settings for all the components.

confluent.controlcenter.rest.proxy.ssl.truststore.location¶

The location of the the truststore file.

Type: string
Default: “”
Importance: low

confluent.controlcenter.rest.proxy.ssl.truststore.password¶

The stored password for the truststore file.

Type: string
Default: “”
Importance: low

confluent.controlcenter.rest.proxy.ssl.keystore.location¶

The location of the keystore file.

Type: string
Default: “”
Importance: low

confluent.controlcenter.rest.proxy.ssl.keystore.password¶

The stored password for the password file.

Type: string
Default: “”
Importance: low

confluent.controlcenter.rest.proxy.ssl.key.password¶

The password of the private key in the keystore file.

Type: string
Default: “”
Importance: low

RBAC settings¶

Metadata Service (MDS) and other optional settings required for implementing RBAC in Control Center. For a complete configuration example of essential settings, see Configure RBAC for Control Center on Confluent Platform.

confluent.metadata.bootstrap.server.urls¶

A comma-separated list of valid URLs that specify where the RBAC metadata server or servers can be reached. This configuration is required to run Control Center inside an RBAC environment.

Type: long
Default: 0
Importance: low

confluent.metadata.basic.auth.user.info¶

Formatted as USERNAME:PASSWORD, the credentials of an RBAC user for Control Center to act on behalf of. This includes running Kafka Streams, authorizing requests, and interacting with other Confluent Platform services. This configuration is required to run Control Center inside an RBAC environment.

Type: string
Default: “”
Importance: low

confluent.controlcenter.auth.bearer.issuer¶

JWT token issuer.

Type: string
Default: “”
Importance: low

public.key.path¶

Path to public key for authenticating JWT tokens.

Type: string
Default: “”
Importance: low

confluent.controlcenter.auth.bearer.roles.claim¶

JWT roles claim.

Type: string
Default: “”
Importance: low

confluent.controlcenter.mds.client.max.requests.queued.per.destination¶

The number of requests that can be queued for the Control Center MDS client used with RBAC. You can increase this property value to increase queue capacity, but you should not lower the value. Consider adjusting this value if you receive a Max requests queued per destination 1024 exceeded error.

Type: int
Default: 1024
Importance: low

confluent.controlcenter.mds.client.idle.timeout¶

The number of seconds before an idle connection to the Control Center MDS client used with RBAC times out. You can reduce this property value to help reduce the number connections left in a CLOSE_WAIT state.

Type: int
Default: 30
Importance: low

confluent.controlcenter.auth.bearer.token.max.lifetime.ms¶

Bearer token issued during login cannot renew itself beyond this duration. The maximum value: 86400000 (24 hours). If you set this to more than 24 hours, the system overrides your setting and uses 24 hours.

Type: long
Default: “”
Importance: low

Cluster Registry settings¶

Version 6.0.1 of Confluent Platform and later includes optional settings to enable the Cluster Registry in Confluent Platform for Control Center, which creates a more user-friendly RBAC role binding experience and enables centralized audit logging.

confluent.metadata.cluster.registry.enable¶

The value for this flag is True if the cluster registry is enabled. When enabled, cluster information will be read from the cluster registry.

Type: boolean
Default: false

Note

If this feature flag is enabled, the following flags will be ignored:

confluent.controlcenter.kafka.<name>.bootstrap.servers
confluent.controlcenter.kafka.<name>.<connection config>

An exception to this rule occurs when you need to specify additional flags, such as confluent.controlcenter.kafka.<name>.ssl.keystore.location.

confluent.metadata.cluster.registry.merge.configuration.enable¶

When enabled, the configuration information for Kafka clusters in the properties file is merged with the one from cluster registry. This enables users to configure additional properties that cannot be added to cluster registry (for example, confluent.controlcenter.kafka.<name>.ssl.keystore.location).

Type: boolean
Default: true

confluent.controlcenter.purge.stale.cluster.enable¶

When enabled, Control Center will purge stale cluster information from the command store.

Type: boolean
Default: false

Email settings¶

These optional settings control the SMTP server and account used when an alerts triggers the email action.

Important

The body of the email alert is populated with the first hostname specified in the confluent.controlcenter.rest.listeners property. The default value is localhost:9021.

confluent.controlcenter.mail.enabled¶

Enable email alerts. If this setting is false, you cannot add email alert actions in the web user interface.

Type: boolean
Default: false
Importance: low

confluent.controlcenter.mail.host.name¶

Hostname of outgoing SMTP server.

Type: string
Default: localhost
Importance: low

confluent.controlcenter.mail.port¶

SMTP port open on confluent.controlcenter.mail.host.name.

Type: int
Default: 587
Importance: low

confluent.controlcenter.mail.ssl.checkserveridentity¶

Forces the use of TLS and validation of the server’s certificate. Enabling this flag causes Control Center to use the port set by confluent.controlcenter.mail.ssl.port instead of confluent.controlcenter.mail.port.

Type: boolean
Default: false
Importance: low

confluent.controlcenter.mail.ssl.port¶

SSL-specific SMTP port to open on confluent.controlcenter.mail.host.name. Setting confluent.controlcenter.mail.ssl.checkserveridentity to true forces the use of this port and not the confluent.controlcenter.mail.port.

Type: int
Default: 465
Importance: low

confluent.controlcenter.mail.from¶

The originating address for emails sent from Control Center.

Type: string
Default: c3@confluent.io
Importance: low

confluent.controlcenter.mail.bounce.address¶

Override for confluent.controlcenter.mail.from config to send message bounce notifications.

Type: string
Importance: low

confluent.controlcenter.mail.starttls.required¶

Forces using STARTTLS.

Type: boolean
Default: false
Importance: low

confluent.controlcenter.mail.username¶

Username for username/password authentication. Authentication with your SMTP server only performs if this value is set.

Type: string
Importance: low

confluent.controlcenter.mail.password¶

Password for username/password authentication.

Type: string
Importance: low

Webhook settings¶

This setting is optional.

confluent.controlcenter.webhook.enabled¶

Enable supported webhook alerts. If this setting is false, you cannot add webhook alert actions in the web user interface.

Type: boolean
Default: true
Importance: low

Feature settings¶

These optional settings enable Confluent Control Center features such as message inspection, broker configurations, license manager, ksqlDB for Confluent Platform, and Schema Registry. They apply to all clusters managed by the current Control Center installation. Most features are enabled by default except the deprecated views for legacy System Health and Streams Monitoring.

confluent.controlcenter.topic.inspection.enable¶

Enable users to inspect topics.

Type: boolean
Default: true
Importance: low

confluent.controlcenter.broker.config.edit.enable¶

Enable user access to Edit dynamic cluster configuration settings.

Type: boolean
Default: true
Importance: low

confluent.controlcenter.license.manager.enable¶

Enable License Manager in Control Center.

Type: boolean
Default: true
Importance: low

confluent.controlcenter.consumers.view.enable¶

Enable the Consumers view in Control Center.

Type: boolean
Default: true
Importance: low

confluent.controlcenter.ksql.enable¶

Enable user access to the ksqlDB GUI.

Type: boolean
Default: true
Importance: low

confluent.controlcenter.schema.registry.enable¶

Enable user access to Manage Schemas in Confluent Platform.

Type: boolean
Default: true
Importance: low

confluent.controlcenter.ui.autoupdate.enable¶

Enable auto updating the Control Center UI.

Type: boolean
Default: true
Importance: low

confluent.controlcenter.usage.data.collection.enable¶

Data collection is disabled, and this property has no effect regardless of its value. Enable or disable data collection in Control Center.

Type: boolean
Default: true
Importance: low

confluent.controlcenter.ui.replicator.monitoring.enable¶

Enable Replicator monitoring in the Control Center UI.

Type: boolean
Default: true
Importance: low

confluent.controlcenter.ui.controller.chart.enable¶

Enable the Active Controller chart to display within the Broker uptime panel in the Control Center UI.

Type: boolean
Default: false
Importance: low

ksqlDB settings¶

You can use these optional settings to use Control Center to interact with ksqlDB Server, which runs separately from your Kafka clusters. For access control configuration related to ksqlDB, see Feature settings.

confluent.controlcenter.ksql.<ksql-cluster-name>.advertised.url¶

Comma-separated list of advertised URLs to access the ksqlDB cluster on Control Center. Replace <ksql-cluster-name> with the name Control Center should use to identify this ksqlDB cluster. By default, this is set to the value specified in confluent.controlcenter.ksql.<ksql-cluster-name>.url. These hostnames must be reachable from any browser that will use the ksqlDB web interface in Control Center.

For example, if ksqlDB is communicating over an internal DNS that is not externally resolvable or routeable (for example, if running in Docker for Mac), then the advertised URL must be set so that the browser can resolve the externally available DNS that ksqlDB is available at. For more information, see Connect Standalone ksqlDB Server Instances to Confluent Control Center on Confluent Platform.

Type: list
Default: “”
Importance: low

confluent.controlcenter.ksql.<ksql-cluster-name>.url¶

Comma-separated list of the ksqlDB server hostnames and listener ports for the ksqlDB cluster specified by <ksql-cluster-name>. By default, this is empty. These hostnames must be reachable from the machine Control Center is installed on. For more information, see Connect Standalone ksqlDB Server Instances to Confluent Control Center on Confluent Platform.

Type: list
Default: “”
Importance: low

confluent.controlcenter.ksql.advertised.url¶

Deprecated. The advertised URL to access the ksqlDB cluster on Control Center. By default, this is set to the value specified in confluent.controlcenter.ksql.url.

Type: string
Default: “”
Importance: low

confluent.controlcenter.ksql.url¶

Deprecated. The ksqlDB server hostname and listener port. This is deprecated by confluent.controlcenter.ksql.<ksql-cluster-name>.url. If this deprecated configuration is supplied, then Control Center will ignore any named ksqlDB configurations.

Type: string
Default: “”
Importance: low

Internal Kafka Streams settings¶

Because Control Center reads and writes data to Kafka, you are allowed to change some optional settings for producer and consumer configurations.

Caution

Changing these values is not recommended unless advised by Confluent Support.

Some examples of values used internally are given. These settings map 1:1 with producer/consumer configs used internally by Control Center and all use the prefix confluent.controlcenter.streams.{producer,consumer}..

confluent.controlcenter.streams.num.stream.threads¶

The number of threads to execute stream processing.

Type: int
Default: 12
Importance: low

confluent.controlcenter.streams.producer.compression.type¶

Compression type to use on internal topic production.

Type: string
Default: lz4
Importance: low

confluent.controlcenter.streams.producer.retries¶

Number of retries in case of production failure.

Type: int
Default: maximum integer (effectively infinite)
Importance: low

confluent.controlcenter.streams.producer.retry.backoff.ms¶

Time to wait before retrying in case of production failure.

Type: long
Default: 100
Importance: low

confluent.controlcenter.streams.ssl.cipher.suites¶

A list of cipher suites. This is a named combination of authentication, encryption, MAC and key exchange algorithm used to negotiate the security settings for a network connection using TLS. By default, all of the available cipher suites are supported.

Type: list
Default: null
Importance: low

confluent.controlcenter.streams.ssl.enabled.protocols¶

The comma-separated list of protocols enabled for TLS connections. The default value is TLSv1.2,TLSv1.3 when running with Java 11 or later, TLSv1.2 otherwise. With the default value for Java 11 (TLSv1.2,TLSv1.3), Kafka clients and brokers prefer TLSv1.3 if both support it, and falls back to TLSv1.2 otherwise (assuming both support at least TLSv1.2).

Type: list
Default: TLSv1.2,TLSv1.3
Importance: medium

confluent.controlcenter.streams.task.timeout.ms¶

The maximum amount of time, in milliseconds, a task will wait due to internal errors and retry the task before an external error is raised. Replaces the deprecated confluent.controlcenter.streams.retries setting. If the timeout value set to 0 ms, a task would raise an external error when the first internal error occurs. For any timeout value larger than 0 ms, a task retries at least once before an error is raised.

Type: int
Default: 0
Importance: medium

Internal Command settings¶

These settings are optional.

The command topic is used to store internal configuration data for Control Center.

Note

For multiple instances of Control Center using the same Kafka cluster for monitoring purposes, it may be helpful to use separate metrics and command topics (if each Control Center installation is monitoring different Kafka clusters).

The command topic reuses the defaults/overrides for Kafka Streams, but allows the following overrides.

confluent.controlcenter.command.topic¶

Topic used to store Control Center configuration.

Type: string
Default: _confluent-command
Importance: low

confluent.controlcenter.command.topic.replication¶

Replication factor for command topic.

Important

Reducing the replication value is not recommended, except in a development environment.

Type: int
Default: 3
Importance: low

confluent.controlcenter.command.topic.retention.ms¶

Maximum time in milliseconds that command data is stored in Kafka. For more information, see data retention.

Type: long
Default: 86,400,000 (1 day)
Importance: low

Consumer Group settings¶

This setting is optional.

If you find that the Consumer Group page is not returning data, you can change the timeout value for the page. The default value is 15 seconds (or 15000 milliseconds); try increasing the value to 30 seconds (30000 milliseconds) if you are having timeout issues.

confluent.controlcenter.consumer.metadata.timeout.ms¶

Time to wait when attempting to retrieve Consumer Group metadata.

Type: int
Default: 15,000
Importance: low