Important

You are viewing documentation for an older version of Confluent Platform. For the latest, click here.

Apache HBase Sink Connector for Confluent Platform¶

The Kafka Connect Apache HBase Sink Connector moves data from Apache Kafka® to Apache HBase. It writes data from a topic in Kafka to a table in the specified HBase instance. Auto-creation of tables and the auto-creation of column families are also supported.

Limitations¶

The connector does not support batched insert operations hence the throughput on inserts is expected to be lower.
The connector does not support delete operations

Prerequisites¶

The following are required to run the Kafka Connect Apache HBase Sink Connector:

Kafka Broker: Confluent Platform 3.3.0 or above
Connect: Confluent Platform 4.1.0 or above
Java 1.8
HBase 1.1.x, 1.2.x, 1.3.x, or 1.4.x

Install the Apache HBase Sink Connector¶

You can install this connector by using the Confluent Hub client (recommended) or you can manually download the ZIP file.

confluent-hub install confluentinc/kafka-connect-hbase:latest

You can install a specific version by replacing latest with a version number. For example:

confluent-hub install confluentinc/kafka-connect-hbase:1.0.1-preview

Install the connector manually¶

Download and extract the ZIP file for your connector and then follow the manual connector installation instructions.

License¶

You can use this connector for a 30-day trial period without a license key.

After 30 days, this connector is available under a Confluent enterprise license. Confluent issues enterprise license keys to subscribers, along with providing enterprise-level support for Confluent Platform and your connectors. If you are a subscriber, please contact Confluent Support at support@confluent.io for more information.

See Confluent Platform license for license properties and License topic configuration for information about the license topic.

Configuration Properties¶

For a complete list of configuration properties for this connector, see Apache HBase Sink Connector Configuration Properties.

Features¶

Column Mapping¶

Write operations require the specification of a column family, a column and a row key for each cell in the table. This connector expects Kafka record values to be formatted as two level structs to be able to infer a column family and a column for each value. Specifically, each Kafka record value must fit the following schema:

{
  "column family name 1": {
    "column name 1": "value",
    "column name 2": "value",
    "...": "...",
  },
  "column family name 2": {
    "column name 3": "value",
    "column name 4": "value",
    "...": "...",
  },
   "...": "..."
}

For example, consider the following Kafka record value:

{
  "usage_stats": {
    "daily_active_users": "10m",
    "churn_rate": "5%"
  },
  "sales": {
    "Jan": "10k",
    "Feb": "12k"
  }
}

If this record is written to an empty table, it would look like the example below:

	usage_stats		sales
	daily_active_users	churn_rate	Jan	Feb
“example_row_key”	“10m”	“5%”	“10k”	“12k”

Where the first row represents the column families and the second row represents the columns

If the record does not conform to this two-level struct schema, the connector would attempt to gracefully handle the following cases:

If the record is a struct but some of the top-level fields are not structs then the values of these fields are mapped to a default column family.

As an example of this case, consider the following Kafka record value:
```
{
  "usage_stats": {
    "daily_active_users": "10m",
    "churn_rate": "5%"
  },
  "sales": "10"
}
```
If this record is written to an empty table, the table would look like the example below:

usage_stats default_column_family

daily_active_users churn_rate sales

“example_row_key” “10m” “5%” “10k”

Note

The default column family is the topic name and the default column name is KAFKA_VALUE
If the record value is not a struct, the connector writes the entire value as a byte array to the default column and default column family.

If such a value were to be written to an empty table, the table would look like:

default_column_family

default_column

“example_row_key” kafka value

Row Key Construction¶

This connector supports the construction of a row key from the Kafka record key.

Fields within the key can be concatenated together to form a row key. See the Apache HBase Sink Connector Configuration Properties for additional information.

Tip

For more complex row key construction, consider using Kafka Connect Transformations to format the record key as desired. ARE YOU THERE?

Data Types¶

Data from the Kafka record types are serialized into byte arrays before being written. This connector uses the hbase Bytes library to handle serializing. The following table shows how Kafka record types are serialized in this connector.

Kafka Record Type	Byte Array Serialization
INT8, INT16, INT32, INT64, INT64, FLOAT32, FLOAT64, BOOLEAN, STRING	Hbase Bytes
BYTES	Used as is
DATE, TIMESTAMP	Serialized as a Long (through Hbase Bytes)
ARRAY, MAP, STRUCT	Serialized as a stringified JSON object

Auto Table Creation and Auto Column Family Creation¶

If auto.create.tables is enabled, the connector can create the destination table in cases where the table is missing.

If auto.create.column.families is enabled, the connector can create missing columns families in the table, relative to the record schema.

Note

Since it is sparse, columns are created on the fly if they don’t already exist in the table, regardless of these settings.

Proxy Settings¶

Note

When the proxy.url proxy settings are configured, the system property variables (https.proxyHost and https.proxyPort) are set globally for the entire JVM.

Troubleshooting Connector and Task Failures¶

You can use the Connect REST API to check the status of the connectors and tasks. If a task or connector has failed, the trace field will include a reason and a stack trace. The vast majority of the errors thrown by this connector fall into two categories:

Record-level failures
Connector-level failures

Table Creation Errors¶

Table creation can be a time-intensive task and sometimes the connector can fail while attempting to create a table. In such cases, consider increasing the retry.timeout.ms.

Errors related to table creation might not only bubble up during table creation, but also when trying to insert. Following are stack trace examples for these errors.

Caused by: org.apache.kafka.connect.errors.ConnectException: Error with inserting to table with
table name example_table: Failed to perform operation. Operation='checkAndPut', projectId='123',
tableName='example_table', rowKey='simple-key-4'
...
Caused by: io.grpc.StatusRuntimeException: FAILED_PRECONDITION: Table currently being created

Caused by: org.apache.kafka.connect.errors.ConnectException: Error with inserting to table with
table name example_table: Failed to perform operation. Operation='checkAndPut', projectId='123',
tableName='example_table', rowKey='simple-key-4'
...
Caused by: io.grpc.StatusRuntimeException: NOT_FOUND: Table not found:

Note

The retry.timeout.ms defaults to 90 seconds and specifies the maximum time in milliseconds allocated for retrying database operations. If auto.create.tables is configured consider leaving this configuration as is, or making it higher, as table creation generally takes at least a minute or two.

Schema Errors¶

If auto.create.column.families is not enabled, many record-level failures can occur because the connector may attempt to write to a column family that does not exist. This is likely to occur if the connector does not receive a two-level struct record value, and then attempts to write the data to the default column family (the kafka topic). If this happens, consider using Kafka Connect Transformations to reconfigure the record to fit the connector’s expectation or enable auto.create.column.families.

Repeated Connection Failures¶

If the connector stops frequently because of connection timeouts, consider increasing request.timeout.ms and restarting the connector.

Connector Error Mode¶

By default, the error.mode for the connector is FAIL. This means if there is an error when writing records, the connector fails. It may be convenient in some cases to set the error.mode to WARN or IGNORE instead so that the connector keeps running even after a particular record fails.

Note

For an example of how to get Kafka Connect connected to Confluent Cloud, see Distributed Cluster in Connect Kafka Connect to Confluent Cloud.

Quick Start¶

In this quick start, the HBase sink connector is used to export data produced by the Avro console producer to a table in a dockerized HBase instance.

Prerequisites¶

HBase Prerequisites

Docker installed

Confluent Prerequisites

Confluent Platform
Confluent CLI (requires separate installation)

Create a Dockerized HBase Instance¶

Get the Docker image.
```
docker pull aaionap/hbase:1.2.0
```

Start the HBase Docker image.

docker run -d --name hbase --hostname hbase -p 2182:2181 -p 8080:8080 -p 8085:8085 -p 9090:9090 -p 9095:9095 -p 16000:16000 -p 16010:16010 -p 16201:16201 -p 16301:16301 aaionap/hbase:1.2.0

Add an entry 127.0.0.1 hbase to /etc/hosts.

Install and Load the Connector¶

Install the connector through the Confluent Hub Client.
```
# run from your CP installation directory
confluent-hub install confluentinc/kafka-connect-hbase:latest
```
Tip

By default, it will install the plugin into share/confluent-hub-components and add the directory to the plugin path.
Adding a new connector plugin requires restarting Connect. Use the Confluent CLI to restart Connect.
```
confluent local stop connect && confluent local start connect
```

Create a hbase-qs.json file with the following contents.

{
  "name": "hbase",
  "config": {
    "topics": "hbase-test",
    "tasks.max": "1",
    "connector.class": "io.confluent.connect.hbase.HBaseSinkConnector",
    "key.converter":"org.apache.kafka.connect.storage.StringConverter",
    "value.converter":"org.apache.kafka.connect.storage.StringConverter",
    "confluent.topic.bootstrap.servers": "localhost:9092",
    "confluent.topic.replication.factor":1,
    "hbase.zookeeper.quorum": "localhost",
    "hbase.zookeeper.property.clientPort": "2182",
    "auto.create.tables": "true",
    "auto.create.column.families": "true",
    "table.name.format": "example_table"
  }
}

Load the HBase Sink Connector.

Caution

You must include a double dash (--) between the topic name and your flag. For more information, see this post.
```
confluent local load hbase -- -d hbase-qs.json
```
Important

Don’t use the CLI commands in production environments.

Check the status of the connector to confirm that it is in a RUNNING state.

confluent local status hbase

Your output should resemble the following:

{
  "name": "hbase",
  "connector": {
    "state": "RUNNING",
    "worker_id": "10.200.7.192:8083"
  },
  "tasks": [
    {
      "id": 0,
      "state": "RUNNING",
      "worker_id": "10.200.7.192:8083"
    }
  ],
  "type": "sink"
}

Send Data to Kafka¶

Produce test data to the hbase-test topic in Kafka using the Confluent CLI confluent local produce command.

echo key1,value1 | confluent local produce hbase-test -- --property parse.key=true --property key.separator=,
echo key2,value2 | confluent local produce hbase-test -- --property parse.key=true --property key.separator=,
echo key3,value3 | confluent local produce hbase-test -- --property parse.key=true --property key.separator=,

Check HBase for Data¶

Start the HBase Shell.

docker exec -it hbase /bin/bash entrypoint.sh

Verify the table exists.

list

The output should resemble:

TABLE
example_table
1 row(s) in 0.2750 seconds
=> ["example_table"]

Verify the data was written.

scan 'example_table'

The output should resemble:

ROW                                COLUMN+CELL
 key1                              column=hbase-test:KAFKA_VALUE, timestamp=1572400726104, value=value1
 key2                              column=hbase-test:KAFKA_VALUE, timestamp=1572400726105, value=value2
 key3                              column=hbase-test:KAFKA_VALUE, timestamp=1572400726106, value=value3
3 row(s) in 0.1570 seconds

Clean up resources¶

Delete the connector.
```
confluent local unload hbase
```
Stop Confluent Platform.
```
confluent local stop
```
Delete the Dockerized HBase Instance.
```
docker stop hbase
docker rm -f hbase
```

Write JSON message values into Apache HBase¶

The example settings file is shown below:

Create a hbase-json.json file with the following contents.

{
   "name": "hbase",
   "config": {
    "topics": "products",
    "tasks.max": "1",
    "connector.class": "io.confluent.connect.hbase.HBaseSinkConnector",

    "key.converter":"org.apache.kafka.connect.storage.StringConverter",
    "value.converter":"org.apache.kafka.connect.json.JsonConverter",
    "value.converter.schemas.enable": "true",

    "confluent.topic.bootstrap.servers": "localhost:9092",
    "confluent.topic.replication.factor":1,
    "hbase.zookeeper.quorum": "localhost",
    "hbase.zookeeper.property.clientPort": "2182",
    "auto.create.tables": "true",
    "auto.create.column.families": "true",
    "table.name.format": "hbase-products"
  }
}

Load the HBase Sink Connector.

Caution

You must include a double dash (--) between the topic name and your flag. For more information, see this post.
```
confluent local load hbase -- -d hbase-json.json
```
Important

Don’t use the CLI commands in production environments.
Check the status of the connector to confirm that it is in a RUNNING state.
```
confluent local status hbase
```

Produce JSON records to products topic.

kafka-console-producer \
 --broker-list localhost:9092 \
 --topic products \
 --property parse.key=true \
 --property key.separator=,

key1, {"schema": {"type": "struct", "fields": [{"type": "int64", "optional": false, "field": "registertime"},{"type": "string", "optional": false, "field": "userid"}, {"type": "string","optional":false,"field": "regionid"},{"type": "string","optional": false,"field": "gender"},{"field" : "usage_stats","type" : "struct","fields" : [ {"field" : "daily_active_users","type" : "int64"}, {"field" : "churn_rate","type" : "float"} ]}],"optional": false,"name": "ksql.users"}, "payload": {"registertime": 1493819497170,"userid": "User_1","regionid": "Region_5","gender": "MALE","usage_stats": {"daily_active_users": 10,"churn_rate": 0.05}}}

Check HBase for Data¶

Start the HBase Shell.

docker exec -it hbase /bin/bash entrypoint.sh

Verify the table exists.

list

The output should resemble:

TABLE
hbase-products
1 row(s) in 0.2750 seconds
=> ["hbase-products"]

Verify the data was written.

scan 'hbase-products'

The output should resemble:

ROW     COLUMN+CELL
key1    column=products:gender, timestamp=1574790075499, value=MALE
key1    column=products:regionid, timestamp=1574790075496, value=Region_5
key1    column=products:registertime, timestamp=1574790075485, value=\x00\x00\x01[\xCE\x94\x9A\xD2
key1    column=products:userid, timestamp=1574790075492, value=User_1
key1    column=usage_stats:churn_rate, timestamp=1574790075507, value==L\xCC\xCD
key1    column=usage_stats:daily_active_users, timestamp=1574790075502, value=\x00\x00\x00\x00\x00\x00\x00\x0A

Write Avro message values into Apache HBase¶

The example settings file is shown below:

Create a hbase-avro.json file with the following contents.

{
  "name": "hbase",
  "config": {
    "topics": "products",
    "tasks.max": "1",
    "connector.class": "io.confluent.connect.hbase.HBaseSinkConnector",

    "key.converter": "io.confluent.connect.avro.AvroConverter",
    "key.converter.schema.registry.url": "http://localhost:8081",

    "value.converter": "io.confluent.connect.avro.AvroConverter",
    "value.converter.schema.registry.url": "http://localhost:8081",

    "confluent.topic.bootstrap.servers": "localhost:9092",
    "confluent.topic.replication.factor":1,
    "hbase.zookeeper.quorum": "localhost",
    "hbase.zookeeper.property.clientPort": "2182",
    "auto.create.tables": "true",
    "auto.create.column.families": "true",
    "table.name.format": "products-avro"
  }
}

Load the HBase Sink Connector.

Caution

You must include a double dash (--) between the topic name and your flag. For more information, see this post.
```
confluent local load hbase -- -d hbase-avro.json
```
Important

Don’t use the CLI commands in production environments.
Check the status of the connector to confirm that it is in a RUNNING state.
```
confluent local status hbase
```

Produce Avro records to products topic.

kafka-avro-console-producer \
 --broker-list localhost:9092 --topic products \
 --property parse.key=true \
 --property key.separator=, \
 --property key.schema='{"type":"string"}' \
 --property value.schema='{"name": "myMetric","type": "record","fields": [{"name": "name","type": "string"},{"name": "type","type": "string"},{"name": "timestamp","type": "long"},{"name": "dimensions","type": {"name": "dimensions","type": "record","fields": [{"name": "dimensions1","type": "string"},{"name": "dimensions2","type": "string"}]}},{"name": "values","type": {"name": "values","type": "record","fields": [{"name":"count", "type": "double"},{"name":"oneMinuteRate", "type": "double"},{"name":"fiveMinuteRate", "type": "double"},{"name":"fifteenMinuteRate", "type": "double"},{"name":"meanRate", "type": "double"}]}}]}'

"key1", {"name" : "test_meter","type" : "meter", "timestamp" : 1574667646013, "dimensions" : {"dimensions1" : "InstanceID","dimensions2" : "i-aaba32d4"},"values" : {"count" : 32423.0,"oneMinuteRate" : 342342.2,"fiveMinuteRate" : 34234.2,"fifteenMinuteRate" : 2123123.1,"meanRate" : 2312312.1}}

Check HBase for Data¶

Start the HBase Shell.

docker exec -it hbase /bin/bash entrypoint.sh

Verify the table exists.

list

The output should resemble:

TABLE
products-avro
1 row(s) in 0.2750 seconds
=> ["products-avro"]

Verify the data was written.

scan 'products-avro'

The output should resemble:

ROW     COLUMN+CELL
key1    column=dimensions:dimensions1, timestamp=1574787507772, value=InstanceID
key1    column=dimensions:dimensions2, timestamp=1574787507777, value=i-aaba32d4
key1    column=products:name, timestamp=1574787507755, value=test_meter
key1    column=products:timestamp, timestamp=1574787507767, value=\x00\x00\x01n\xA1\x81t=
key1    column=products:type, timestamp=1574787507763, value=meter
key1    column=values:count, timestamp=1574787507780, value=@\xDF\xA9\xC0\x00\x00\x00\x00
key1    column=values:fifteenMinuteRate, timestamp=1574787507794, value=A@2\xB9\x8C\xCC\xCC\xCD
key1    column=values:fiveMinuteRate, timestamp=1574787507787, value=@\xE0\xB7Fffff
key1    column=values:meanRate, timestamp=1574787507797, value=AA\xA4<\x0C\xCC\xCC\xCD
key1    column=values:oneMinuteRate, timestamp=1574787507784, value=A\x14\xE5\x18\xCC\xCC\xCC\xCD

Authorization Failures¶

The HBase connector can authenticate with a HBase instance and establish a connection using Kerberos. If a connection fails because of authentication, the connector will stop immediately. These errors may require changes in your connector configurations or HBase configurations account. Try to rerun your connector after you make the changes.

Enabling Debug Logging¶

The Connect worker log configuration controls how much detail is included in the logs. By default, the worker logs include enough detail to identify basic functionality. Enable DEBUG logs in the Connect worker’s log configuration to include more details. This change must be made on each worker and only takes effect upon worker startup. After you change the log configuration as outlined below on each Connect worker, restart all of the Connect workers. A rolling restart can be used if necessary.

Note

Trace-level logging is verbose and contains many more details, and may be useful to solve certain failures. Trace-level logging is enabled like debug-level logging is enabled, except TRACE is used instead of DEBUG.

On-Premises Installation¶

For local or on-premises installations of Confluent Platform, the etc/kafka/connect-log4j.properties file defines the logging configuration of the Connect worker process. To enable DEBUG on just the HBase connector, modify the etc/kafka/connect-log4j.properties file to include the following line:

log4j.logger.io.confluent.hbase=DEBUG

To enable DEBUG on all of the Connect worker’s code, including all connectors, change the log4j.rootLogger= line to use DEBUG instead of INFO. For example, the default log configuration for Connect includes this line:

log4j.rootLogger=INFO, stdout

Change this line to the following to enable DEBUG on all of the Connect worker code:

log4j.rootLogger=DEBUG, stdout

Note

This setting causes may generate a large amount of logs from org.apache.kafka.clients packages, which can be suppressed by setting log4j.logger.org.apache.kafka.clients=ERROR.

Apache HBase Sink Connector for Confluent Platform¶

Limitations¶

Prerequisites¶

Install the Apache HBase Sink Connector¶

Install the connector manually¶

License¶

Configuration Properties¶

Features¶

Column Mapping¶

Row Key Construction¶

Data Types¶

Auto Table Creation and Auto Column Family Creation¶

Proxy Settings¶

Troubleshooting Connector and Task Failures¶

Table Creation Errors¶

Schema Errors¶

Repeated Connection Failures¶

Connector Error Mode¶

Quick Start¶

Prerequisites¶

Create a Dockerized HBase Instance¶

Install and Load the Connector¶

Send Data to Kafka¶

Check HBase for Data¶

Clean up resources¶

Write JSON message values into Apache HBase¶

Check HBase for Data¶

Write Avro message values into Apache HBase¶

Check HBase for Data¶

Authorization Failures¶

Enabling Debug Logging¶

On-Premises Installation¶

Additional Documentation¶