Clickstream Data Analysis Pipeline Using ksqlDB

These steps will guide you through how to setup your environment and run the clickstream analysis tutorial from a Docker container.

image
Prerequisites:
  • Docker
    • Docker version 1.11 or later is installed and running.
    • Docker Compose is installed. Docker Compose is installed by default with Docker for Mac.
    • Docker memory is allocated minimally at 6 GB. When using Docker Desktop for Mac, the default Docker memory allocation is 2 GB. You can change the default allocation to 6 GB in Docker. Navigate to Preferences > Resources > Advanced.
  • Internet connectivity
  • Operating System currently supported by Confluent Platform
  • Networking and Kafka on Docker
    • Configure your hosts and ports to allow both internal and external components to the Docker network to communicate.
  • (Optional) curl.
    • In the steps below, you will download a Docker Compose file. You can download this file any way you like, but the instructions below provide the explicit curl command you can use to download the file.
  • If you are using Linux as your host, for the Elasticsearch container to start successfully you must first run:
sudo sysctl -w vm.max_map_count=262144

Download and run the tutorial

The tutorial is built using Docker Compose. It brings together several Docker images with the required networking and dependencies. The images are quite large and depending on your network connection may take 10-15 minutes to download.

  1. Clone the confluentinc/examples GitHub repository.

    git clone https://github.com/confluentinc/examples.git
    
  2. Navigate to the examples/clickstream directory and switch to the Confluent Platform release branch:

    cd examples/clickstream
    git checkout 7.2.12-post
    
  3. If you want to manually step through the Clickstream tutorial, which is advised for new users who want to gain familiarity with Confluent Platform, skip ahead to the next section. Alternatively, you can run the full solution end-to-end with this script, which automates all the steps in the tutorial:

    ./start.sh
    
  4. You can apply the same concepts explained in this example to Confluent Cloud. Confluent Cloud also has fully managed connectors and ksqlDB applications that you can use, instead of self-managing your own. To try it out, create your own Confluent Cloud instance (see the ccloud-stack utility for Confluent Cloud for an easy way to spin up a new environment), deploy the kafka-connect-datagen connectors, submit your ksqlDB queries, and then point your Elasticsearch connector to Confluent Cloud.

Startup

  1. Get the Jar files for kafka-connect-datagen (source connector) and kafka-connect-elasticsearch (sink connector).

    docker run -v $PWD/confluent-hub-components:/share/confluent-hub-components confluentinc/ksqldb-server:0.8.0 confluent-hub install --no-prompt confluentinc/kafka-connect-datagen:0.4.0
    docker run -v $PWD/confluent-hub-components:/share/confluent-hub-components confluentinc/ksqldb-server:0.8.0 confluent-hub install --no-prompt confluentinc/kafka-connect-elasticsearch:10.0.2
    
  2. Launch the tutorial in Docker.

    docker-compose up -d
    
  3. After a minute or so, run the docker-compose ps status command to ensure that everything has started correctly:

    docker-compose ps
    

    Your output should resemble:

         Name                    Command               State                       Ports
    ---------------------------------------------------------------------------------------------------------
    control-center    /etc/confluent/docker/run        Up      0.0.0.0:9021->9021/tcp
    elasticsearch     /usr/local/bin/docker-entr ...   Up      0.0.0.0:9200->9200/tcp, 9300/tcp
    grafana           /run.sh                          Up      0.0.0.0:3000->3000/tcp
    kafka             /etc/confluent/docker/run        Up      9092/tcp
    ksqldb-cli        /bin/sh                          Up
    ksqldb-server     bash -c # Manually install ...   Up      0.0.0.0:8083->8083/tcp, 0.0.0.0:8088->8088/tcp
    schema-registry   /etc/confluent/docker/run        Up      8081/tcp
    tools             /bin/bash                        Up
    zookeeper         /etc/confluent/docker/run        Up      2181/tcp, 2888/tcp, 3888/tcp
    

Create the Clickstream Data

Once you’ve confirmed all the Docker containers are running, create the source connectors that generate mock data. This demo leverages the embedded Connect worker in ksqlDB.

  1. Launch the ksqlDB CLI:

    docker-compose exec ksqldb-cli ksql http://ksqldb-server:8088
    
  2. Ensure the ksqlDB server is ready to receive requests by running the following until it succeeds:

    show topics;
    

    The output should look similar to:

     Kafka Topic | Partitions | Partition Replicas
    -----------------------------------------------
    -----------------------------------------------
    
  3. Run the script create-connectors.sql that executes the ksqlDB statements to create three source connectors for generating mock data.

    RUN SCRIPT '/scripts/create-connectors.sql';
    

    The output should look similar to:

    CREATE SOURCE CONNECTOR datagen_clickstream_codes WITH (
      'connector.class'          = 'io.confluent.kafka.connect.datagen.DatagenConnector',
      'kafka.topic'              = 'clickstream_codes',
      'quickstart'               = 'clickstream_codes',
      'maxInterval'              = '20',
      'iterations'               = '100',
      'format'                   = 'json',
      'key.converter'            = 'org.apache.kafka.connect.converters.IntegerConverter');
     Message
    ---------------------------------------------
     Created connector DATAGEN_CLICKSTREAM_CODES
    ---------------------------------------------
    [...]
    
  4. Now the clickstream generator is running, simulating the stream of clicks. Sample the messages in the clickstream topic:

    print clickstream limit 3;
    

    Your output should resemble:

    Key format: HOPPING(JSON) or TUMBLING(JSON) or HOPPING(KAFKA_STRING) or TUMBLING(KAFKA_STRING) or KAFKA_STRING
    Value format: JSON or KAFKA_STRING
    rowtime: 2020/06/11 10:38:42.449 Z, key: 222.90.225.227, value: {"ip":"222.90.225.227","userid":12,"remote_user":"-","time":"1","_time":1,"request":"GET /images/logo-small.png HTTP/1.1","status":"302","bytes":"1289","referrer":"-","agent":"Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/59.0.3071.115 Safari/537.36"}
    rowtime: 2020/06/11 10:38:42.528 Z, key: 111.245.174.248, value: {"ip":"111.245.174.248","userid":30,"remote_user":"-","time":"11","_time":11,"request":"GET /site/login.html HTTP/1.1","status":"302","bytes":"14096","referrer":"-","agent":"Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/59.0.3071.115 Safari/537.36"}
    rowtime: 2020/06/11 10:38:42.705 Z, key: 122.152.45.245, value: {"ip":"122.152.45.245","userid":11,"remote_user":"-","time":"21","_time":21,"request":"GET /images/logo-small.png HTTP/1.1","status":"407","bytes":"4196","referrer":"-","agent":"Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/59.0.3071.115 Safari/537.36"}
    Topic printing ceased
    
  5. The second data generator running is for the HTTP status codes. Sample the messages in the clickstream_codes topic:

    print clickstream_codes limit 3;
    

    Your output should resemble:

    Key format: KAFKA_INT
    Value format: JSON or KAFKA_STRING
    rowtime: 2020/06/11 10:38:40.222 Z, key: 200, value: {"code":200,"definition":"Successful"}
    rowtime: 2020/06/11 10:38:40.688 Z, key: 404, value: {"code":404,"definition":"Page not found"}
    rowtime: 2020/06/11 10:38:41.006 Z, key: 200, value: {"code":200,"definition":"Successful"}
    Topic printing ceased
    
  6. The third data generator is for the user information. Sample the messages in the clickstream_users topic:

    print clickstream_users limit 3;
    

    Your output should resemble:

    Key format: KAFKA_INT
    Value format: JSON or KAFKA_STRING
    rowtime: 2020/06/11 10:38:40.815 Z, key: 1, value: {"user_id":1,"username":"Roberto_123","registered_at":1410180399070,"first_name":"Greta","last_name":"Garrity","city":"San Francisco","level":"Platinum"}
    rowtime: 2020/06/11 10:38:41.001 Z, key: 2, value: {"user_id":2,"username":"akatz1022","registered_at":1410356353826,"first_name":"Ferd","last_name":"Pask","city":"London","level":"Gold"}
    rowtime: 2020/06/11 10:38:41.214 Z, key: 3, value: {"user_id":3,"username":"akatz1022","registered_at":1483293331831,"first_name":"Oriana","last_name":"Romagosa","city":"London","level":"Platinum"}
    Topic printing ceased
    
  7. Go to Confluent Control Center UI at http://localhost:9021 and view the three kafka-connect-datagen source connectors created with the ksqlDB CLI.

    Datagen Connectors

Load the Streaming Data to ksqlDB

  1. Load the statements.sql file that runs the tutorial app.

    Important: Before running this step, you must have already run ksql-datagen utility to create the clickstream data, status codes, and set of users.

    RUN SCRIPT '/scripts/statements.sql';
    

    The output will show either a blank message, or Executing statement, similar to this:

     CREATE STREAM clickstream (
            _time bigint,
            time varchar,
            ip varchar,
            request varchar,
            status int,
            userid int,
            bytes bigint,
            agent varchar
        ) with (
            kafka_topic = 'clickstream',
            value_format = 'json'
        );
     Message
    ----------------
     Stream created
    ----------------
    [...]
    

    After the RUN SCRIPT command completes, exit out of the ksqldb-cli with a CTRL+D command

Verify the data

  1. Go to Confluent Control Center UI at http://localhost:9021, and view the ksqlDB view Flow.

    ksqlDB Flow
  2. Verify that data is being streamed through various tables and streams. Query one of the streams CLICKSTREAM:

    Clickstream data

Load the Clickstream Data in Grafana

Send the ksqlDB tables to Elasticsearch and Grafana.

  1. Set up the required Elasticsearch document mapping template

    docker-compose exec elasticsearch bash -c '/scripts/elastic-dynamic-template.sh'
    
  2. Run this command to send the ksqlDB tables to Elasticsearch and Grafana:

    docker-compose exec ksqldb-server bash -c '/scripts/ksql-tables-to-grafana.sh'
    

    Your output should resemble:

    Loading Clickstream-Demo TABLES to Confluent-Connect => Elastic => Grafana datasource
    
    
    ==================================================================
    Charting  CLICK_USER_SESSIONS
            -> Remove any existing Elastic search config
            -> Remove any existing Connect config
            -> Remove any existing Grafana config
            -> Connecting KSQL->Elastic->Grafana  click_user_sessions
            -> Connecting: click_user_sessions
                    -> Adding Kafka Connect Elastic Source es_sink_CLICK_USER_SESSIONS
                    -> Adding Grafana Source
    
    [...]
    
  3. Load the dashboard into Grafana.

    docker-compose exec grafana bash -c '/scripts/clickstream-analysis-dashboard.sh'
    

    Your output should resemble:

    Loading Grafana ClickStream Dashboard
    
  4. Navigate to the Grafana dashboard at http://localhost:3000. Enter the username and password as user and user. Then navigate to the Clickstream Analysis Dashboard.

    Grafana Dashboard
  5. In the Confluent Control Center UI at http://localhost:9021, again view the running connectors. The three kafka-connect-datagen source connectors were created with the ksqlDB CLI, and the seven Elasticsearch sink connectors were created with the ksqlDB REST API.

    Connectors

Sessionize the data

One of the tables created by the demo, CLICK_USER_SESSIONS, shows a count of user activity for a given user session. All clicks from the user count towards the total user activity for the current session. If a user is inactive for 30 seconds, then any subsequent click activity is counted towards a new session.

The clickstream demo simulates user sessions with a script. The script pauses the DATAGEN_CLICKSTREAM connector every 90 seconds for a 35 second period of inactivity. By stopping the DATAGEN_CLICKSTREAM connector for some time greater than 30 seconds, you will see distinct user sessions.

You’ll probably use a longer inactivity gap for session windows in practice. But the demo uses 30 seconds so you can see the sessions in action in a reasonable amount of time.

Session windows are different because they monitor user behavior and other window implementations consider only time.

To generate the session data execute the following statement from the examples/clickstream directory:

./sessionize-data.sh

The script will issue some statements to the console about where it is in the process.

View the data in Grafana

  1. Navigate to the Grafana dashboard at http://localhost:3000. Enter the username and password as user and user. Then navigate to the Clickstream Analysis Dashboard.

    Grafana UI success

This dashboard demonstrates a series of streaming functionality where the title of each panel describes the type of stream processing required to generate the data. For example, the large chart in the middle is showing web-resource requests on a per-username basis using a Session window - where a sessions expire after 300 seconds of inactivity. Editing the panel allows you to view the datasource - which is named after the streams and tables captured in the statements.sql file.

Troubleshooting

  • Check the Data Sources page in Grafana.
    • If your data source is shown, select it and scroll to the bottom and click the Save & Test button. This will indicate whether your data source is valid.