Kafka Streams Processor API

The Processor API allows developers to define and connect custom processors and to interact with state stores. With the Processor API, you can define arbitrary stream processors that process one received record at a time, and connect these processors with their associated state stores to compose the processor topology that represents a customized processing logic.

Overview

The Processor API can be used to implement both stateless as well as stateful operations, where the latter is achieved through the use of state stores.

Tip

Combining the DSL and the Processor API: You can combine the convenience of the DSL with the power and flexibility of the Processor API as described in the section Applying processors and transformers (Processor API integration).

For a complete list of available API functionality, see the Kafka Streams API docs.

Defining a Stream Processor

A stream processor is a node in the processor topology that represents a single processing step. With the Processor API, you can define arbitrary stream processors that processes one received record at a time, and connect these processors with their associated state stores to compose the processor topology.

You can define a customized stream processor by implementing the Processor interface, which provides the process() API method. The process() method is called on each of the received records.

The Processor interface also has an init() method, which is called by the Kafka Streams library during task construction phase. Processor instances should perform any required initialization in this method. The init() method passes in a ProcessorContext instance, which provides access to the metadata of the currently processed record, including its source Apache Kafka® topic and partition, its corresponding message offset, and further such information. You can also use this context instance to schedule a punctuation function (via ProcessorContext#schedule()), to forward a new record as a key-value pair to the downstream processors (via ProcessorContext#forward()), and to commit the current processing progress (via ProcessorContext#commit()). Any resources you set up in init() can be cleaned up in the close() method. Kafka Streams may re-use a single Processor object by calling init() on it again after close().

The Processor interface takes two sets of generic parameters: KIn, VIn, KOut, and VOut. These define the input and output types that the processor implementation can handle. KIn and VIn define the key and value types that are passed to process(). Likewise, KOut and VOut define the forwarded key and value types that ProcessorContext#forward() accepts. If your processor does not forward any records at all, or if it forwards only null keys or values, a best practice is to set the output generic type argument to Void. If it needs to forward multiple types that don’t share a common superclass, you must set the output generic type argument to Object.

Both the Processor#process() and the ProcessorContext#forward() methods handle records in the form of the Record<K, V> data class. This class gives you access to the main components of a Kafka record: the key, value, timestamp and headers. When forwarding records, you can use the constructor to create a new Record from scratch, or you can use the convenience builder methods to replace one of the Record properties and copy over the rest. For example, inputRecord.withValue(newValue) copies the key, timestamp, and headers from inputRecord while setting the output record’s value to newValue. This call doesn’t mutate inputRecord but instead creates a shallow copy. This is only a shallow copy, so if you plan to mutate the key, value, or headers elsewhere in the program, you must create a deep copy of those fields manually.

In addition to handling incoming records by using Processor#process(), you can schedule periodic invocation, named “punctuation”, in your processor’s init() method by calling ProcessorContext#schedule() and passing it a Punctuator. The PunctuationType determines what notion of time is used for the punctuation scheduling: either event-time or wall-clock-time (by default, event-time is configured to represent event-time via TimestampExtractor). When event-time is used, punctuate() is triggered purely by data, because event-time is determined (and advanced forward) by the timestamps derived from the input data. When there is no new input data arriving, event-time is not advanced and punctuate() is not called.

For example, if you schedule a Punctuator function every 10 seconds based on PunctuationType.STREAM_TIME and if you process a stream of 60 records with consecutive timestamps from 1 (first record) to 60 seconds (last record), then punctuate() would be called 6 times. This happens regardless of the time required to actually process those records. punctuate() would be called 6 times regardless of whether processing these 60 records takes a second, a minute, or an hour.

When wall-clock-time (i.e. PunctuationType.WALL_CLOCK_TIME) is used, punctuate() is triggered purely by the wall-clock time. Reusing the example above, if the Punctuator function is scheduled based on PunctuationType.WALL_CLOCK_TIME, and if these 60 records were processed within 20 seconds, punctuate() is called 2 times (one time every 10 seconds). If these 60 records were processed within 5 seconds, then no punctuate() is called at all. Note that you can schedule multiple Punctuator callbacks with different PunctuationType types within the same processor by calling ProcessorContext#schedule() multiple times inside init() method.

Attention

Stream-time is advanced only when Kafka Streams processes records. If there are no records to process, or if Kafka Streams is waiting for new records due to the Task Idling configuration, stream time will not advance and punctuate() will not be triggered if PunctuationType.STREAM_TIME was specified. This behavior is independent of the configured timestamp extractor, which means that using WallclockTimestampExtractor does not enable wall-clock triggering of punctuate().

The following example Processor defines a simple word-count algorithm and the following actions are performed:

  • In the init() method, schedule the punctuation every second (the minimum time unit supported is one millisecond) and retrieve the local state store by its name “Counts”.
  • In the process() method, upon each received record, split the value string into words, and update their counts into the state store (we will talk about this later in this section).

The Punctuator object scheduled in init() defines a punctuate() method, in which we iterate the local state store and send the aggregated counts to the downstream processor (we will talk about downstream processors later in this section), and commit the current stream state.

Attention

The code shows a simplified example that only works for single partition input topics. A generic Processor API word-count would require two processors: the first is stateless, splits each line into words, and sets the words as record keys. The result of the first processor is written back to an additional topic that is consumed by the second (stateful) processor that does the actual counting. Writing the words back to a topic is required to group the same words together so they go to the same instance of the second processor. This is similar in function to the shuffle phase of a Map-Reduce computation.

public class WordCountProcessor implements Processor<String, String, String, String> {
    private KeyValueStore<String, Integer> kvStore;

    @Override
    public void init(final ProcessorContext<String, String> context) {
        context.schedule(Duration.ofSeconds(1), PunctuationType.STREAM_TIME, timestamp -> {
            try (final KeyValueIterator<String, Integer> iter = kvStore.all()) {
                while (iter.hasNext()) {
                    final KeyValue<String, Integer> entry = iter.next();
                    context.forward(new Record<>(entry.key, entry.value.toString(), timestamp));
                }
            }
        });
        kvStore = context.getStateStore("Counts");
    }

    @Override
    public void process(final Record<String, String> record) {
        final String[] words = record.value().toLowerCase(Locale.getDefault()).split("\\W+");

        for (final String word : words) {
            final Integer oldValue = kvStore.get(word);

            if (oldValue == null) {
                kvStore.put(word, 1);
            } else {
                kvStore.put(word, oldValue + 1);
            }
        }
    }

    @Override
    public void close() {
        // close any resources managed by this processor
        // Note: Do not close any StateStores as these are managed by the library
    }
}

Note

Stateful processing with state stores: The WordCountProcessor defined above can access the currently received record in its process() method, and it can leverage state stores to maintain processing states to, for example, remember recently arrived records for stateful processing needs like aggregations and joins. For more information, see the state stores documentation.

Accessing Processor Context

As we have mentioned above, a ProcessorContext controls the processing workflow such as scheduling a punctuation function, and committing the current processed state, etc. In fact, this object can also be used to access the metadata related with the application like applicationId, taskId, and stateDir located to store the task’s state, and also the current processed record’s metadata like topic, partition, offset, and timestamp.

The following example process() function enriches the record differently based on the record context:

public class EnrichProcessor implements Processor<String, String> {

  private ProcessorContext context;

  @Override
  @SuppressWarnings("unchecked")
  public void init(ProcessorContext context) {
      // keep the processor context locally because we need it in process()
      this.context = context;
  }

  @Override
  public void process(String key, String value) {
      switch(context.topic()) {
          case "alerts":
              context.forward(key, decorateWithHighPriority(value));
          case "notifications":
              context.forward(key, decorateWithMediumPriority(value));
          default:
              context.forward(key, decorateWithLowPriority(value));
      }
  }
}

Note

Record context metadata: The metadata of the currently processing record may not always be available. For example, if the current processing record is not piped from any source topic, but is generated from a punctuation function, then its metadata field topic will be empty, and partition offset will be a sentinel value (-1 in this case), while its timestamp field will be the triggering time of the punctuation function that generated this record.

State Stores

To implement a stateful Processor or Transformer, you must provide one or more state stores to the processor or transformer (stateless processors or transformers do not need state stores). State stores can be used to remember recently received input records, to track rolling aggregates, to de-duplicate input records, and more. Another feature of state stores is that they can be interactively queried from other applications, such as a NodeJS-based dashboard or a microservice implemented in Scala or Go.

The available state store types in Kafka Streams have fault tolerance enabled by default.

Defining and creating a State Store

You can either use one of the available store types or implement your own custom store type. It’s common practice to leverage an existing store type via the Stores factory.

Note that, when using Kafka Streams, you normally don’t create or instantiate state stores directly in your code. Rather, you define state stores indirectly by creating a so-called StoreBuilder. This builder is used by Kafka Streams as a factory to instantiate the actual state stores locally in application instances when and where needed.

The following store types are available out of the box.

Store Type Storage Engine Fault-tolerant? Description
Persistent KeyValueStore<K, V> RocksDB Yes (enabled by default)
// Creating a persistent key-value store:
// here, we create a `KeyValueStore<String, Long>` named "persistent-counts".
import org.apache.kafka.streams.processor.StateStoreSupplier;
import org.apache.kafka.streams.state.StoreBuilder;
import org.apache.kafka.streams.state.Stores;

StoreBuilder countStoreBuilder =
  Stores.keyValueStoreBuilder(
    Stores.persistentKeyValueStore("persistent-counts"),
    Serdes.String(),
    Serdes.Long()
  );

See PersistentKeyValueStore for detailed factory options.

In-memory KeyValueStore<K, V> - Yes (enabled by default)
// Creating an in-memory key-value store:
// here, we create a `KeyValueStore<String, Long>` named "inmemory-counts".
import org.apache.kafka.streams.processor.StateStoreSupplier;
import org.apache.kafka.streams.state.StoreBuilder;
import org.apache.kafka.streams.state.Stores;

StateStoreBuilder countStoreBuilder =
  Stores.keyValueStoreBuilder(
    Stores.inMemoryKeyValueStore("inmemory-counts"),
    Serdes.String(),
    Serdes.Long()
  );

See InMemoryKeyValueStore for detailed factory options.

Timestamped State Stores

KTables always store timestamps by default. A timestamped state store improves stream processing semantics and enables management of out-of-order data in source KTables, detects out-of-order joins and aggregations, and gets the timestamp of the latest update in an Interactive Query.

You can query timestamped state stores with or without a timestamp.

Note

You can upgrade with a single rolling bounce per instance.

  • For Processor API users, nothing changes in existing applications, and you have the option of using the timestamped stores.
  • For DSL operators, store data is upgraded lazily in the background.
  • No upgrade happens if you provide a custom XxxBytesStoreSupplier, but you can opt-in by implementing the TimestampedBytesStore interface. In this case, the old format is retained, and Kafka Streams uses a proxy store that removes/adds timestamps on read/write.

Fault-tolerant State Stores

To make state stores fault-tolerant and to allow for state store migration without data loss, a state store can be continuously backed up to a Kafka topic behind the scenes. For example, to migrate a stateful stream task from one machine to another when elastically adding or removing capacity from your application. This topic is sometimes referred to as the state store’s associated changelog topic, or its changelog. For example, if you experience machine failure, the state store and the application’s state can be fully restored from its changelog. You can enable or disable this backup feature for a state store.

By default, persistent key-value stores are fault-tolerant. They are backed by a compacted changelog topic. The purpose of compacting this topic is to prevent the topic from growing indefinitely, to reduce the storage consumed in the associated Kafka cluster, and to minimize recovery time if a state store needs to be restored from its changelog topic.

Similarly, persistent window stores are fault-tolerant. They are backed by a topic that uses both compaction and deletion. Because of the structure of the message keys that are being sent to the changelog topics, this combination of deletion and compaction is required for the changelog topics of window stores. For window stores, the message keys are composite keys that include the “normal” key and window timestamps. For these types of composite keys it would not be sufficient to only enable compaction to prevent a changelog topic from growing out of bounds. With deletion enabled, old windows that have expired will be cleaned up by Kafka’s log cleaner as the log segments expire. The default retention setting is Materialized#withRetention() + 1 day. You can override this setting by specifying StreamsConfig.WINDOW_STORE_CHANGE_LOG_ADDITIONAL_RETENTION_MS_CONFIG in the StreamsConfig.

When you open an Iterator from a state store you must call close() on the iterator when you are done working with it to reclaim resources; or you can use the iterator from within a try-with-resources statement. If you do not close an iterator, you may encounter an OOM error.

Enable or Disable Fault Tolerance of State Stores (Store Changelogs)

You can enable or disable fault tolerance for a state store by enabling or disabling the change logging of the store through withLoggingEnabled() and withLoggingDisabled(). You can also fine-tune the associated topic’s configuration if needed.

Example for disabling fault-tolerance:

import org.apache.kafka.streams.state.StoreBuilder;
import org.apache.kafka.streams.state.Stores;

StoreBuilder<KeyValueStore<String, Long>> countStoreSupplier = Stores.keyValueStoreBuilder(
  Stores.persistentKeyValueStore("Counts"),
    Serdes.String(),
    Serdes.Long())
  .withLoggingDisabled(); // disable backing up the store to a changelog topic

Attention

If the changelog is disabled then the attached state store is no longer fault tolerant and it can’t have any standby replicas.

Here is an example for enabling fault tolerance, with additional changelog-topic configuration: You can add any log config from kafka.log.LogConfig. Unrecognized configs will be ignored.

import org.apache.kafka.streams.state.StoreBuilder;
import org.apache.kafka.streams.state.Stores;

Map<String, String> changelogConfig = new HashMap<>();
// override min.insync.replicas
changelogConfig.put("min.insync.replicas", "1");

StoreBuilder<KeyValueStore<String, Long>> countStoreSupplier = Stores.keyValueStoreBuilder(
  Stores.persistentKeyValueStore("Counts"),
    Serdes.String(),
    Serdes.Long())
  .withLoggingEnabled(changelogConfig); // enable changelogging, with custom changelog settings

Implementing Custom State Stores

You can use the built-in state store types or implement your own. The primary interface to implement for the store is org.apache.kafka.streams.processor.StateStore. Kafka Streams also has a few extended interfaces such as KeyValueStore.

You also need to provide a “factory” for the store by implementing the org.apache.kafka.streams.state.StoreBuilder interface, which Kafka Streams uses to create instances of your store.

There is an example state store implementation in Scala, which can serve as a starting point for your own stores:

  • CMSStore (Scala) – an in-memory, fault-tolerant store that leverages a Count-Min Sketch data structure for probabilistic counting of items in an input stream. The state store supplier is implemented in CMSStoreSupplier. The backup and restore functionality of the state store and its fault tolerance can be enabled and disabled through configuration. The changelogging of the store is performed through CMSStoreChangeLogger.

Connecting Processors and State Stores

Now that a processor (WordCountProcessor) and the state stores have been defined, you can construct the processor topology by connecting these processors and state stores together by using the Topology instance. In addition, you can add source processors with the specified Kafka topics to generate input data streams into the topology, and sink processors with the specified Kafka topics to generate output data streams out of the topology.

Here is an example implementation:

Topology builder = new Topology();
// add the source processor node that takes Kafka topic "source-topic" as input
builder.addSource("Source", "source-topic")
    // add the WordCountProcessor node which takes the source processor as its upstream processor
    .addProcessor("Process", () -> new WordCountProcessor(), "Source")
    // add the count store associated with the WordCountProcessor processor
    .addStateStore(countStoreBuilder, "Process")
    // add the sink processor node that takes Kafka topic "sink-topic" as output
    // and the WordCountProcessor node as its upstream processor
    .addSink("Sink", "sink-topic", "Process");

Here is a quick explanation of this example:

  • A source processor node named "Source" is added to the topology using the addSource method, with one Kafka topic "source-topic" fed to it. You can specify optional key and value deserializers to read the source, like Confluent GenericAvroSerde and SpecificAvroSerde.
  • A processor node named "Process" with the pre-defined WordCountProcessor logic is then added as the downstream processor of the "Source" node using the addProcessor method.
  • A predefined persistent key-value state store is created and associated with the "Process" node, using countStoreSupplier.
  • A sink processor node is then added to complete the topology using the addSink method, taking the "Process" node as its upstream processor and writing to a separate "sink-topic" Kafka topic. Note that users can also use another overloaded variant of addSink to dynamically determine the Kafka topic to write to for each received record from the upstream processor.

In some cases, it may be more convenient to add and connect a state store when you add the processor to the topology. This can be done by implementing ConnectedStoreProvider#stores() on the ProcessorSupplier instead of calling Topology#addStateStore(), like this:

Topology builder = new Topology();
// add the source processor node that takes Kafka "source-topic" as input
builder.addSource("Source", "source-topic")
    // add the WordCountProcessor node which takes the source processor as its upstream processor.
    // the ProcessorSupplier provides the count store associated with the WordCountProcessor
    .addProcessor("Process", new ProcessorSupplier<String, String, String, String>() {
        public Processor<String, String, String, String> get() {
            return new WordCountProcessor();
        }

        public Set<StoreBuilder<?>> stores() {
            final StoreBuilder<KeyValueStore<String, Long>> countsStoreBuilder =
                Stores
                    .keyValueStoreBuilder(
                        Stores.persistentKeyValueStore("Counts"),
                        Serdes.String(),
                        Serdes.Long()
                    );
            return Collections.singleton(countsStoreBuilder);
        }
    }, "Source")
    // add the sink processor node that takes Kafka topic "sink-topic" as output
    // and the WordCountProcessor node as its upstream processor
    .addSink("Sink", "sink-topic", "Process");

This enables a processor to “own” state stores, effectively encapsulating their usage from the user wiring the topology. Multiple processors that share a state store may provide the same store with this technique, as long as the StoreBuilder is the same instance.

In these topologies, the "Process" stream processor node is considered a downstream processor of the "Source" node, and an upstream processor of the "Sink" node. As a result, whenever the "Source" node forwards a newly fetched record from Kafka to its downstream "Process" node, the WordCountProcessor#process() method is triggered to process the record and update the associated state store. Whenever context#forward() is called in the WordCountProcessor#punctuate() method, the aggregate key-value pair will be sent via the "Sink" processor node to the Kafka topic "sink-topic". Note that in the WordCountProcessor implementation, you must refer to the same store name "Counts" when accessing the key-value store, otherwise an exception will be thrown at runtime, indicating that the state store cannot be found. If the state store is not associated with the processor in the Topology code, accessing it in the processor’s init() method will also throw an exception at runtime, indicating the state store is not accessible from this processor.

The Topology#addProcessor function takes a ProcessorSupplier argument, and the supplier pattern requires that a new Processor instance is returned each time ProcessorSupplier#get() is called. Creating a single Processor object and returning the same object reference in ProcessorSupplier#get() is a violation of the supplier pattern and leads to runtime exceptions, so don’t provide a singleton Processor instance to Topology. The ProcessorSupplier should always generate a new instance each time ProcessorSupplier#get() is called.

Now that you have fully defined your processor topology in your application, you can proceed to running the Kafka Streams application.

Describing a Topology

After a Topology is specified, it is possible to retrieve a description of the corresponding DAG via #describe() that returns a TopologyDescription. A TopologyDescription contains all added source, processor, and sink nodes as well as all attached stores. You can access the specified input and output topic names and patterns for source and sink nodes. For processor nodes, the attached stores are added to the description. Additionally, all nodes have a list to all their connected successor and predecessor nodes. Thus, TopologyDescription allows to retrieve the DAG structure of the specified topology. Note that global stores are listed explicitly because they are accessible by all nodes without the need to explicitly connect them. Furthermore, nodes are grouped by SubTopology, where each SubTopology is a group of processor nodes that are directly connected to each other (i.e., either by a direct connection–but not a topic–or by sharing a store). During execution, each SubTopology will be processed by one or multiple tasks. Thus, each SubTopology describes an independent unit of works that can be executed by different threads in parallel. Describing a Topology before starting your streams application with the specified topology is helpful to reason about tasks and thus maximum parallelism (we will talk about how to execute your written application later in this section). It is also helpful to get insight into a Topology if it is not specified directly as described above but via Kafka Streams DSL.

Note

This website includes content developed at the Apache Software Foundation under the terms of the Apache License v2.