Tutorial: Migrate Data with Cluster Linking on Confluent Platform

When migrating data from an old cluster to a new cluster, Cluster Linking makes an identical copy of your topics on the new cluster, so it’s easy to make the move with low downtime and no data loss.

Cluster Linking can:

  • Automatically create matching “mirror” topics with the same configurations, so you don’t have to recreate your topics by hand
  • Sync all historical data and new data from the existing topics to the new mirror topics
  • Sync your consumer offsets, so your consumers can pick up exactly where they left off, without missing any messages or consuming any duplicates
  • Move consumers from the old cluster to the new cluster independently
  • Move producers from the old cluster to the new cluster topic-by-topic
../../_images/cluster-link-migrate-cp.png

Success stories

Read about successful migrations with Cluster Linking:

Standard migration with Cluster Linking

The sections below describe the general steps to migrate data from one cluster to another using Cluster Linking.

Step 2: Wait for mirroring lag to approach zero (0)

When mirroring lag is almost zero (0), this means that the existing data in your topics has been mirrored to your new cluster.

This allows you to switch your consumers and producers with minimal downtime.

If you want certain topics to be ready before others, you can prioritize those topics by pausing mirroring on the other topics. That way, more throughput will be allocated to the topics you prioritize.

If your cluster link is having trouble keeping up with the incoming data and is not able to get mirroring lag near 0, you may need to prioritize certain topics by pausing mirroring on the other topics.

(Optional) Step 3: Move consumer groups from the old cluster to the new cluster

../../_images/cluster-migrate-move-consumer-groups-to-new-cluster.png

You can move each consumer group independently, if you wish. Because consumer offsets are synced, consumers will pick up from the same spot where they left off. To move a consumer group, follow these steps:

  1. Stop the consumer group on the old cluster.

  2. Wait for at least consumer.offset.sync.ms (default is 30 seconds) to ensure its latest offsets have been synced.

  3. Exclude that consumer group’s name from the cluster link, in the consumer.offset.group.filters setting.

  4. Verify that the topic offsets the consumer group is at have been synced to the mirror topic.

    You can do this by checking that consumer lag > mirroring lag.

    Before you start the consumer on the new cluster, you need to ensure that the offsets at which the consumer is at have been mirrored to the mirror topic. If the consumer is ahead of the mirroring, then its offsets will be reset to the latest offsets in the topic, and it will consume duplicates.

    For example, if the consumer is at offset 100 for a partition, but you start the consumer when the mirror topic is only at offset 90, then the consumer will start consuming from the end of the topic, and will re-consume messages 90-100.

  5. Restart the consumer group on the new cluster.

Step 4: Stop producers and consumers

../../_images/cluster-migrate-stop-producers-consumers.png

Stop all producers and any remaining consumers. This gives the cluster link a chance to “catch up,” without new messages coming in.

Step 5: Promote the mirror topic

When mirroring lag is 0, call the promote Cluster Linking API on the mirror topic.

This will convert the mirror topic into a normal, writable topic.

You must wait for mirroring lag to go to zero (0) to ensure all messages have been replicated to your new cluster. The promote command checks to make sure the topic is not lagging before succeeding, but you should also check the mirroring lag metric.

Step 6: Restart producers and consumers

../../_images/cluster-migrate-restart-producers-consumers.png

Restart your producers and remaining consumers on the new cluster.

You have now moved your topics, producers, and consumers to a new cluster.

Step 7: Extra steps when leaving some consumers on the original cluster

If you want to leave some of your consumer groups on your original cluster, you must take some extra steps. You will need to get mirroring flowing in the reverse direction: from your new cluster back to your original cluster.

../../_images/cluster-migrate-extra-steps-orig.png

Note

  • A given consumer group should only consume from one cluster. A consumer group cannot be “stretched” between two clusters.
  • This strategy is only available for Confluent clusters, not for Apache Kafka® clusters, as Cluster Linking cannot move data to an Apache Kafka® cluster.
  1. Make sure that the cluster link you used for migration was mirroring these consumer group offsets too; even though the consumers won’t move. The consumer offsets will temporarily be on the new cluster.
  2. Make sure that your consumer group(s) have stopped consuming (in step 4, above).
  3. Delete the original topics on the original cluster.
  4. Create a cluster link in the reverse direction: from the new cluster to the original cluster. Have this cluster link sync the consumer offsets for these consumer groups. This will move the consumer offsets back to the original cluster.
  5. Create mirror topic(s) on the original cluster. This will start data flowing from the new cluster to the original cluster.
  6. Once the mirror topic has mirrored up to the offsets where the consumer group(s) were, exclude those consumer group(s) from the cluster link’s consumer offset sync. This will stop the cluster link from syncing their consumer offsets.
  7. Restart the consumer group(s) on the original cluster. (See the caveats in step 3, above.)

Alternate migration strategies

If you cannot move all of your producers for a given topic(s) at the same time, you can consider two alternate approaches. Both involve more hands-on work than the standard migration approach with Cluster Linking.

Bidirectional with Cluster Linking

Mirror topics are read-only. Therefore, if you migrate some producers but not others, you cannot have those producers writing to the mirror topic on the new cluster. You’ll need a different topic to write these events to, and you’ll need to sync those events back to your old cluster for any consumers that haven’t moved yet. You’ll also need to make some changes to your consumers to make sure they get the events produced to both clusters.

For a given topic, you can set up three new topics:

  • A new, regular topic on your new cluster by the same name. This topic will receive new events produced to your new cluster.

  • A mirror topic on your new cluster, which mirrors historical data and any new events produced to the old cluster. You’ll give this topic a prefix, so it doesn’t clash with the writable topic.

    Tip

    Prefixing is available in Confluent Cloud as of early Q2 2022.

  • A mirror topic on your old cluster, which mirrors the writable topic from the new cluster. This brings new events back to your old cluster for straggling consumers.

../../_images/cluster-link-migrate-consumers-producers.png

There are several changes you need to make to your consumers to make this work:

  • Your consumers need to consume from a regex pattern–instead of a topic name–that will capture both topics. For example, if your topic is named clicks, the consumers could consume from the pattern .*clicks to consume from both clicks and the prefixed topics.
  • When moving a consumer group, it will need to manually set its offsets on the new cluster for the writable topic. Because this is moving “upstream,” the cluster link does not sync its consumer offsets from the mirror topic on the old cluster.
  • Because your consumers are consuming from two different topics, you cannot rely on the partitions for ordering. A message with a given key will be produced to one partition on the old cluster and a different partition on the new cluster. Two messages with the same key may be read in different order by different consumers. So, your consumers must use something else to determine message order, such as the timestamp.

Bidirectional with Replicator

Confluent Replicator can be run in VMs or in a Kubernetes cluster. It syncs messages between topics in two different clusters.

You can set up two deployments of Replicator to achieve bi-directional replication. Replicator ensures that no cyclical loops are created; that is, that the same message doesn’t get replicated back to the original cluster where it was produced.

../../_images/migrate-with-replicator.png

However, the ordering between these two topics will not be the same. That means it is impossible for a consumer to move from the `old` cluster to the `new` cluster and pick up at the same spot where it left off. The consumer must choose to either:

  1. Rewind to an earlier offset in order to ensure that no messages are missed. However, this will cause the consumer to consume duplicates of some messages. Or,
  2. Start consuming at the end of the topic, which will cause it to miss the most recently produced messages.