Enable Security for a ZooKeeper-Based Cluster in Confluent Platform

Important

As of Confluent Platform 7.5, ZooKeeper is deprecated for new deployments. Confluent recommends KRaft mode for new deployments. For more information, see KRaft Overview for Confluent Platform.

This tutorial provides an example of how to enable security on a ZooKeeper-based Confluent Platform.

Tip

For RBAC enablement, see Configure Metadata Service (MDS) in Confluent Platform.

Overview

This tutorial provides a step-by-step example to enable TLS/SSL encryption, SASL authentication, and authorization on Confluent Platform with monitoring using Confluent Control Center. Follow the steps to walk through configuration settings for securing ZooKeeper, Apache Kafka® brokers, Kafka Connect, and Confluent Replicator, plus all the components required for monitoring, including the Confluent Metrics Reporter and Confluent Monitoring Interceptors.

Note

• For simplicity, this tutorial uses SASL/PLAIN (or PLAIN), a simple username/password authentication mechanism typically used with TLS encryption to implement secure authentication.
• For production deployments of Confluent Platform, SASL/GSSAPI (Kerberos) or SASL/SCRAM is recommended.
• Confluent Cloud uses SASL/PLAIN (or PLAIN) over TLS v1.2 encryption for authentication because it offers broad client support while providing a good level of security. The usernames and passwords used in the SASL exchange are API keys and secrets that should be securely managed using a secrets store and rotated periodically.

Note

If you use a backslash character in property values, you must escape the backslash character when entering a value in a Confluent Platform configuration file or when using Confluent CLI.

For example, if a password property value is 1\o/-r@c6pD (including a valid backslash character), then you need to enter it as 1\\o/-r@c6pD in, for example, a server.properties file. Otherwise, the following error message appears:

Caused by: java.io.IOException: Keystore was tampered with, or password was incorrect

If you use Confluent CLI for secrets protection, and include a backslash character (without escaping it) in a property value you are encrypting, then the following error message appears: Error: properties: Line xxx: invalid unicode literal, where xxx would be the line with the backslash.

Prerequisites

You should understand why it is critical to secure Confluent Platform and have a conceptual understanding of how encryption, authentication, and authorization work.

Before proceeding with this tutorial:

• Use the Quick Start for Confluent Platform to bring up Confluent Platform without security enabled

Note

Do not proceed with this tutorial until you have verified that you can run Confluent Platform without security enabled. This helps users focus on just the security configuration additions and validation.

Creating TLS/SSL Keys and Certificates

Each machine in the cluster has a public-private key pair, and a certificate to identify the machine. The certificate, however, is unsigned, which means that an attacker can create such a certificate to pretend to be any machine.

Therefore, it is important to prevent forged certificates by signing them for each machine in the cluster. A certificate authority (CA) is responsible for signing certificates. CA works like a government that issues passports - the government validates the identity of the person applying for the passport and then provides a passport in a standard form that is difficult to forge. Other governments verify the form is valid to ensure the passport is authentic. Similarly, the CA signs the certificates, and the cryptography guarantees that a signed certificate is computationally difficult to forge. Thus, as long as the CA is a genuine and trusted authority, the clients have high assurance that they are connecting to the authentic machines.

The keystore stores each machine’s own identity. The truststore stores all the certificates that the machine should trust. Importing a certificate into one’s truststore also means trusting all certificates that are signed by that certificate authority. As the analogy above, trusting the certificate authority (CA) also means trusting all passports (certificates) that it has issued. This attribute is called the chain of trust, and it is particularly useful when deploying SSL on a large Confluent Platform cluster. You can sign all certificates in the cluster with a single CA, and have all machines share the same truststore that trusts the CA. That way all machines can authenticate all other machines.

Important

OpenTLS/SSL certificates may include an Extended Key Usage extension (extendedKeyUsage) to control the purpose for which the certificate public key can be used. If this field is empty, there are no restrictions on usage, but if any usage is specified, valid TLS/SSL implementations must enforce the restrictions.

Extension key usages are relevant for client and server authentication. Confluent Server brokers require both client and server authentication for intracluster communication because every broker is both the client and the server for the other brokers. Some corporate CAs may have a signing profile for web servers †hat is used for Confluent Platform as well and only include the serverAuth usage value, causing the TLS/SSL handshake to fail.

To deploy SSL, the general steps are:

1. Generate the keys and certificates.
2. Create your own Certificate Authority (CA).
3. Sign the certificate.

The steps to create keys and sign certificates are enumerated below. You may also adapt the kafka-generate-ssl script from confluent-platform-security-tools.git.

The definitions of the parameters used in the steps are as follows:

• keystore: the location of the keystore
• ca-cert: the certificate of the CA
• ca-key: the private key of the CA
• ca-password: the passphrase of the CA
• cert-file: the exported, unsigned certificate of the server
• cert-signed: the signed certificate of the server

Note

After a connection has been established, Confluent Platform does not perform certificate renegotiations or revocations. In cases where a certificate is compromised, or you wish to revoke a certificate, use ACL blacklists (specifically, the --deny-principal or --deny-host options) to remove a specific client. For details about ACLs, see Use Access Control Lists (ACLs) for Authorization in Confluent Platform.

Configure host name verification

Host name verification of servers is enabled by default for client connections as well as interbroker connections to prevent man-in-the-middle attacks. Server host name verification may be disabled by setting ssl.endpoint.identification.algorithm to an empty string. For example,

ssl.endpoint.identification.algorithm=

For dynamically configured Confluent Server broker listeners, hostname verification may be disabled using kafka-configs. For example,

./bin/kafka-configs --bootstrap-server localhost:9093 --entity-type brokers --entity-name 0 --alter \
--add-config "listener.name.internal.ssl.endpoint.identification.algorithm="

Configure host name In certificates

If host name verification is enabled, clients verify the server’s fully qualified domain name (FQDN) against one of the following two fields:

• Common Name (CN)
• Subject Alternative Name (SAN)

Both fields are valid, however RFC-2818 recommends the use of SAN. SAN is also more flexible, allowing for multiple DNS entries to be declared. Another advantage is that the CN can be set to a more meaningful value for authorization purposes. To add a SAN field, append the argument -ext SAN=DNS:{FQDN} to the keytool command:

keytool -keystore server.keystore.jks -alias localhost -validity {validity} -genkey -keyalg RSA -ext SAN=DNS:{FQDN}

The following command can be run afterwards to verify the contents of the generated certificate:

keytool -list -v -keystore server.keystore.jks

Generate the keys and certificates

You can use the Java keytool utility for this process. Consult the Java documentation for more information on the commands and arguments.

1. Generate the key and the certificate for each Confluent Server broker in the cluster. Generate the key into a keystore called kafka.server.keystore so that you can export and sign it later with CA. The keystore file contains the private key of the certificate; therefore, it needs to be kept safely.

   # With user prompts
   keytool -keystore kafka.server.keystore.jks -alias localhost -keyalg RSA -genkey
   
   # Without user prompts, pass command line arguments
   keytool -keystore kafka.server.keystore.jks -alias localhost -keyalg RSA -validity {validity} -genkey -storepass {keystore-pass} -keypass {key-pass} -dname {distinguished-name} -ext SAN=DNS:{hostname}
   

Ensure that the common name (CN) exactly matches the fully qualified domain name (FQDN) of the server. The client compares the CN with the DNS domain name to ensure that it is indeed connecting to the desired server, not a malicious one. The hostname of the server can also be specified in the Subject Alternative Name (SAN). Since the distinguished name is used as the server principal when TLS/SSL is used as the interbroker security protocol, it is useful to have hostname as a SAN rather than the CN.

Create your own Certificate Authority (CA)

2. Generate a CA that is simply a public-private key pair and certificate, and it is intended to sign other certificates.

   openssl req -new -x509 -keyout ca-key -out ca-cert -days {validity}
   

3. Add the generated CA to the clients’ truststore so that the clients can trust this CA:

   keytool -keystore kafka.client.truststore.jks -alias CARoot -importcert -file ca-cert
   

4. Add the generated CA to the brokers’ truststore so that the brokers can trust this CA.

   keytool -keystore kafka.server.truststore.jks -alias CARoot -importcert -file ca-cert
   

Sign the certificate

To sign all certificates in the keystore with the CA that you generated:

5. Export the certificate from the keystore:

   keytool -keystore kafka.server.keystore.jks -alias localhost -certreq -file cert-file
   

6. Sign it with the CA:

   openssl x509 -req -CA ca-cert -CAkey ca-key -in cert-file -out cert-signed -days {validity} -CAcreateserial -passin pass:{ca-password}
   

7. Import both the certificate of the CA and the signed certificate into the broker keystore:

   keytool -keystore kafka.server.keystore.jks -alias CARoot -importcert -file ca-cert
   keytool -keystore kafka.server.keystore.jks -alias localhost -importcert -file cert-signed
   

Summary

Combining the steps described above, the script to create the CA and broker and client truststores and keystores is as follows:

keytool -keystore kafka.server.keystore.jks -alias localhost -keyalg RSA -validity {validity} -genkey
openssl req -new -x509 -keyout ca-key -out ca-cert -days {validity}
keytool -keystore kafka.client.truststore.jks -alias CARoot -importcert -file ca-cert
keytool -keystore kafka.server.truststore.jks -alias CARoot -importcert -file ca-cert
keytool -keystore kafka.server.keystore.jks -alias localhost -certreq -file cert-file
openssl x509 -req -CA ca-cert -CAkey ca-key -in cert-file -out cert-signed -days {validity} -CAcreateserial -passin pass:{ca-password}
keytool -keystore kafka.server.keystore.jks -alias CARoot -importcert -file ca-cert
keytool -keystore kafka.server.keystore.jks -alias localhost -importcert -file cert-signed

Note

In this tutorial, the client does not need a keystore because client authentication is done using SASL/PLAIN instead of mutual TLS (mTLS). However, if you use mTLS authentication, you create a client keystore and sign all certificates with the CA that you generated, similarly as done for the brokers.

Configure ZooKeeper

For Confluent Server broker to ZooKeeper communication, you will configure optional DIGEST-MD5 authentication.

1. Set the authentication provider:

   authProvider.sasl=org.apache.zookeeper.server.auth.SASLAuthenticationProvider
   

2. Configure the zookeeper_jaas.conf file as follows. Note the two semicolons.

   Server {
          org.apache.zookeeper.server.auth.DigestLoginModule required
          user_super="admin-secret"
          user_kafka="kafka-secret";
   };
   

3. When you start ZooKeeper, pass the name of its JAAS file as a JVM parameter:

   export KAFKA_OPTS="-Djava.security.auth.login.config=etc/kafka/zookeeper_jaas.conf"
   zookeeper-server-start etc/kafka/zookeeper.properties
   

   Tip

   These instructions are based on the assumption that you are installing Confluent Platform by using ZIP or TAR archives. For more information, see Install Confluent Platform On-Premises.

Configure Confluent Server brokers

Administrators can configure a mix of secure and unsecured clients. This tutorial ensures that all broker/client and interbroker network communication is encrypted in the following manner:

• All broker/client communication use SASL_SSL security protocol, which ensures that the communication is encrypted and authenticated using SASL/PLAIN.
• All interbroker communication use SSL security protocol, which ensures that the communication is encrypted and authenticated using TLS.
• The unsecured PLAINTEXT port is not enabled.

The steps are as follows:

1. Enable the desired security protocols and ports in each Confluent Server broker’s server.properties. Notice that both SSL and SASL_SSL are enabled.

   listeners=SSL://:9093,SASL_SSL://:9094
   

2. To enable the Confluent Server brokers to authenticate each other using mutual TLS (mTLS) authentication, you need to configure all the Confluent Server brokers for client authentication (in this case, the requesting broker is the “client”). We recommend setting ssl.client.auth=required. We discourage configuring it as requested because misconfigured brokers will still connect successfully and it provides a false sense of security.

   security.inter.broker.protocol=SSL
   ssl.client.auth=required
   

3. Define the TLS/SSL truststore, keystore, and password in the server.properties file of every Confluent Server broker. Because this stores passwords directly in the Confluent Server broker configuration file, it is important to restrict access to these files using file system permissions.

   ssl.truststore.location=/var/ssl/private/kafka.server.truststore.jks
   ssl.truststore.password=test1234
   ssl.keystore.location=/var/ssl/private/kafka.server.keystore.jks
   ssl.keystore.password=test1234
   ssl.key.password=test1234
   

4. Enable SASL/PLAIN mechanism in the server.properties file of every broker.

   sasl.enabled.mechanisms=PLAIN
   

5. Create the broker’s JAAS configuration file in each Confluent Server broker’s config directory, let’s call it kafka_server_jaas.conf for this example.

   • Configure a KafkaServer section used when the broker validates client connections, including those from other brokers. The broker properties username and password are used to initiate connections to other brokers, and in this example, kafkabroker is the user for interbroker communication. The user_{userName} property set defines the passwords for all other clients that connect to the broker. In this example, there are two users kafkabroker and client.
   • Configure a Client section used when the Confluent Server broker connects to ZooKeeper. There is a single username and password that must match the ZooKeeper JAAS configuration.

   Note

   Note the two semicolons in each section.

   KafkaServer {
      org.apache.kafka.common.security.plain.PlainLoginModule required
      username="kafkabroker"
      password="kafkabroker-secret"
      user_kafkabroker="kafkabroker-secret"
      user_kafka-broker-metric-reporter="kafkabroker-metric-reporter-secret"
      user_client="client-secret";
   };
   
   Client {
      org.apache.zookeeper.server.auth.DigestLoginModule required
      username="kafka"
      password="kafka-secret";
   };
   

1. If you are using Confluent Control Center to monitor your deployment, and if the monitoring cluster backing Confluent Control Center is also configured with the same security protocols, you must configure the Confluent Metrics Reporter for security as well. Add these configurations to the server.properties file of each Confluent Server broker.

   metric.reporters=io.confluent.metrics.reporter.ConfluentMetricsReporter
   confluent.metrics.reporter.security.protocol=SASL_SSL
   confluent.metrics.reporter.ssl.truststore.location=/var/ssl/private/kafka.server.truststore.jks
   confluent.metrics.reporter.ssl.truststore.password=test1234
   confluent.metrics.reporter.sasl.mechanism=PLAIN
   confluent.metrics.reporter.sasl.jaas.config=org.apache.kafka.common.security.plain.PlainLoginModule required \
      username="kafka-broker-metric-reporter" \
      password="kafka-broker-metric-reporter-secret";
   

2. To enable ACLs, we need to configure an authorizer. Kafka provides a simple authorizer implementation, and to use it, you can add the following to server.properties:

   authorizer.class.name=kafka.security.auth.SimpleAclAuthorizer
   

3. The default behavior is such that if a resource has no associated ACLs, then no one is allowed to access the resource, except super users. Setting Confluent Server broker principals as super users is a convenient way to give them the required access to perform interbroker operations. Because this tutorial configures the interbroker security protocol as SSL, set the super user name to be the distinguished name configured in the broker’s certificate. (See other authorization configuration options).

   super.users=User:<DN of broker1>;User:<DN of broker2>;User:<DN of broker3>;User:kafka-broker-metric-reporter
   

Combining the configuration steps described above, the Confluent Server broker’s server.properties file contains the following configuration settings:

# Enable TLS/SSL security protocol for interbroker communication
# Enable SASL_SSL security protocol for broker-client communication
listeners=SSL://:9093,SASL_SSL://:9094
security.inter.broker.protocol=SSL
ssl.client.auth=required

# Broker security settings
ssl.truststore.location=/var/ssl/private/kafka.server.truststore.jks
ssl.truststore.password=test1234
ssl.keystore.location=/var/ssl/private/kafka.server.keystore.jks
ssl.keystore.password=test1234
ssl.key.password=test1234
sasl.enabled.mechanisms=PLAIN

# Confluent Metrics Reporter for monitoring with Confluent Control Center
metric.reporters=io.confluent.metrics.reporter.ConfluentMetricsReporter
confluent.metrics.reporter.security.protocol=SASL_SSL
confluent.metrics.reporter.ssl.truststore.location=/var/ssl/private/kafka.server.truststore.jks
confluent.metrics.reporter.ssl.truststore.password=test1234
confluent.metrics.reporter.sasl.mechanism=PLAIN
confluent.metrics.reporter.sasl.jaas.config=org.apache.kafka.common.security.plain.PlainLoginModule required \
   username="kafka-broker-metric-reporter" \
   password="kafkabroker-metric-reporter-secret";

# ACLs
authorizer.class.name=kafka.security.auth.SimpleAclAuthorizer
super.users=User:<DN of broker1>;User:<DN of broker2>;User:<DN of broker3>

Note

This is not the full Confluent Server broker configuration. This is just the additional configurations required to enable security on a known working Confluent Platform cluster of Confluent Server brokers that is already successfully monitored using Confluent Control Center.

Start each Confluent Server broker. Pass the name of the JAAS file as a JVM parameter:

export KAFKA_OPTS=-Djava.security.auth.login.config=/etc/kafka/kafka_server_jaas.conf
kafka-server-start etc/kafka/server.properties

Alternatively, you can modify the configuration file with the following:

listener.name.sasl_ssl.plain.sasl.jaas.config=org.apache.kafka.common.security.plain.PlainLoginModule required \
   username="admin" \
   password="admin-secret" \
   user_admin="admin-secret" \
   user_kafkabroker1="kafkabroker1-secret";

The properties username and password are used by the broker to initiate connections to other brokers. The set of properties user_<username> defines the passwords for all users that connect to the broker and the broker validates all client connections including those from other brokers using these properties.

Configure Kafka clients

Common configuration

Any component that interacts with secured Confluent Server brokers is a client and must be configured for security as well. These clients include Kafka Connect workers and certain connectors such as Replicator, Kafka Streams API clients, ksqlDB clients, non-Java clients, Confluent Control Center, Confluent Schema Registry, REST Proxy, etc.

All Kafka clients share a general set of security configuration parameters required to interact with a secured Confluent Platform cluster:

1. To encrypt data using TLS/SSL and authenticate using SASL, configure the security protocol to use SASL_SSL. (If you want TLS/SSL for both encryption and authentication without SASL, the security protocol would be SSL).

   security.protocol=SASL_SSL
   

2. To configure TLS encryption truststore settings, set the truststore configuration parameters. In this tutorial, the Kafka client does not need the keystore because authentication is done using SASL/PLAIN instead of mutal TLS (mTLS).

   ssl.truststore.location=/var/ssl/private/kafka.client.truststore.jks
   ssl.truststore.password=test1234
   

3. To configure SASL authentication, set the SASL mechanism, which in this tutorial is PLAIN. Then configure the JAAS configuration property to describe to connect to the Confluent Server brokers. The properties username and password are used to configure the user for connections.

   sasl.mechanism=PLAIN
   sasl.jaas.config=org.apache.kafka.common.security.plain.PlainLoginModule required \
      username="client" \
      password="client-secret";
   

Combining the configuration steps above, the Kafka client’s general pattern for enabling TLS/SSL encryption and SASL/PLAIN authentication is to add the following to the Kafka client’s properties file.

security.protocol=SASL_SSL
ssl.truststore.location=/var/ssl/private/kafka.client.truststore.jks
ssl.truststore.password=test1234
sasl.mechanism=PLAIN
sasl.jaas.config=org.apache.kafka.common.security.plain.PlainLoginModule required \
    username="client" \
    password="client-secret";

What differs between Kafka clients is the specific configuration prefix that precedes each configuration parameter, as described in the sections below.

Configure Console Producer and Consumer

The command line tools for console producer and consumer are convenient ways to send and receive a small amount of data to the cluster. They are clients and thus need security configurations as well.

1. Create a client_security.properties file with the security configuration parameters described above, with no additional configuration prefix.

   security.protocol=SASL_SSL
   ssl.truststore.location=/var/ssl/private/kafka.client.truststore.jks
   ssl.truststore.password=test1234
   sasl.mechanism=PLAIN
   sasl.jaas.config=org.apache.kafka.common.security.plain.PlainLoginModule required \
       username="client" \
       password="client-secret";
   

2. Pass in the properties file when using the command line tools.

   kafka-console-producer --broker-list kafka1:9094 --topic test-topic --producer.config client_security.properties
   kafka-console-consumer --bootstrap-server kafka1:9094 --topic test-topic --consumer.config client_security.properties
   

Configure ksqlDB and stream processing clients

Enabling ksqlDB and stream processing clients for security is simply a matter of passing the security configurations to the relevant client constructor.

Take the basic Kafka client security configuration:

security.protocol=SASL_SSL
ssl.truststore.location=/var/ssl/private/kafka.client.truststore.jks
ssl.truststore.password=test1234
sasl.mechanism=PLAIN
sasl.jaas.config=org.apache.kafka.common.security.plain.PlainLoginModule required \
    username="client" \
    password="client-secret";

And configure the application for the following:

• Top-level, with no additional configuration prefix
• Confluent Monitoring Interceptor producer used for Confluent Control Center streams monitoring, with an additional configuration prefix producer.confluent.monitoring.interceptor.
• Confluent Monitoring Interceptor consumer used for Confluent Control Center streams monitoring, with an additional configuration prefix consumer.confluent.monitoring.interceptor.

Combining these configurations, ksqlDB configuration for TLS/SSL encryption and SASL/PLAIN authentication is the following. You may configure them by either loading the properties from a file, as shown below, or by setting the properties programmatically.

# Top level
security.protocol=SASL_SSL
ssl.truststore.location=/var/ssl/private/kafka.client.truststore.jks
ssl.truststore.password=test1234
sasl.mechanism=PLAIN
sasl.jaas.config=org.apache.kafka.common.security.plain.PlainLoginModule required username="client" password="client-secret";

# Embedded producer for streams monitoring with Confluent Control Center
producer.interceptor.classes=io.confluent.monitoring.clients.interceptor.MonitoringProducerInterceptor
producer.confluent.monitoring.interceptor.security.protocol=SASL_SSL
producer.confluent.monitoring.interceptor.ssl.truststore.location=/var/ssl/private/kafka.client.truststore.jks
producer.confluent.monitoring.interceptor.ssl.truststore.password=test1234
producer.confluent.monitoring.interceptor.sasl.mechanism=PLAIN
producer.confluent.monitoring.interceptor.sasl.jaas.config=org.apache.kafka.common.security.plain.PlainLoginModule required username="client" password="client-secret";

# Embedded consumer for streams monitoring with Confluent Control Center
consumer.interceptor.classes=io.confluent.monitoring.clients.interceptor.MonitoringConsumerInterceptor
consumer.confluent.monitoring.interceptor.security.protocol=SASL_SSL
consumer.confluent.monitoring.interceptor.ssl.truststore.location=/var/ssl/private/kafka.client.truststore.jks
consumer.confluent.monitoring.interceptor.ssl.truststore.password=test1234
consumer.confluent.monitoring.interceptor.sasl.mechanism=PLAIN
consumer.confluent.monitoring.interceptor.sasl.jaas.config=org.apache.kafka.common.security.plain.PlainLoginModule required username="client" password="client-secret";

Note

This is not the full configuration. This is just the additional configurations required to enable security on a known working ksqlDB or Java application that is monitored using Confluent Control Center.

Configure Kafka Connect

From the perspective of the Confluent Server brokers, Kafka Connect is another Kafka client, and this tutorial configures Kafka Connect for TLS/SSL encryption and SASL/PLAIN authentication. Enabling Connect for security is simply a matter of passing the security configurations to the Connect workers, the producers used by source connectors, and the consumers used by sink connectors.

Take the basic client security configuration:

security.protocol=SASL_SSL
ssl.truststore.location=/var/ssl/private/kafka.client.truststore.jks
ssl.truststore.password=test1234
sasl.mechanism=PLAIN
sasl.jaas.config=org.apache.kafka.common.security.plain.PlainLoginModule required \
    username="client" \
    password="client-secret";

And configure Kafka Connect for the following:

• Top-level for Connect workers, with no additional configuration prefix
• Embedded producer for source connectors, with an additional configuration prefix producer.
• Embedded consumers for sink connectors, with an additional configuration prefix consumer.
• Confluent Monitoring Interceptor producer for source connectors used for Confluent Control Center streams monitoring, with an additional configuration prefix producer.confluent.monitoring.interceptor.
• Confluent Monitoring Interceptor consumer for sink connectors used for Confluent Control Center streams monitoring, with an additional configuration prefix consumer.confluent.monitoring.interceptor.

Combining these configurations, a Kafka Connect worker configuration for TLS/SSL encryption and SASL/PLAIN authentication is the following. You may configure these settings in the connect-distributed.properties file.

# Connect worker
security.protocol=SASL_SSL
ssl.truststore.location=/var/ssl/private/kafka.client.truststore.jks
ssl.truststore.password=test1234
sasl.mechanism=PLAIN
sasl.jaas.config=org.apache.kafka.common.security.plain.PlainLoginModule required \
   username="connect" \
   password="connect-secret";

# Embedded producer for source connectors
producer.security.protocol=SASL_SSL
producer.ssl.truststore.location=/var/ssl/private/kafka.client.truststore.jks
producer.ssl.truststore.password=test1234
producer.sasl.mechanism=PLAIN
producer.sasl.jaas.config=org.apache.kafka.common.security.plain.PlainLoginModule required \
  username="connect" \
  password="connect-secret";

# Embedded consumer for sink connectors
consumer.security.protocol=SASL_SSL
consumer.ssl.truststore.location=/var/ssl/private/kafka.client.truststore.jks
consumer.ssl.truststore.password=test1234
consumer.sasl.mechanism=PLAIN
consumer.sasl.jaas.config=org.apache.kafka.common.security.plain.PlainLoginModule required \
  username="connect" \
  password="connect-secret";

# Embedded producer for source connectors for streams monitoring with Confluent Control Center
producer.interceptor.classes=io.confluent.monitoring.clients.interceptor.MonitoringProducerInterceptor
producer.confluent.monitoring.interceptor.security.protocol=SASL_SSL
producer.confluent.monitoring.interceptor.ssl.truststore.location=/var/ssl/private/kafka.client.truststore.jks
producer.confluent.monitoring.interceptor.ssl.truststore.password=test1234
producer.confluent.monitoring.interceptor.sasl.mechanism=PLAIN
producer.confluent.monitoring.interceptor.sasl.jaas.config=org.apache.kafka.common.security.plain.PlainLoginModule required \
  username="connect" \
  password="connect-secret";

# Embedded consumer for sink connectors for streams monitoring with Confluent Control Center
consumer.interceptor.classes=io.confluent.monitoring.clients.interceptor.MonitoringConsumerInterceptor
consumer.confluent.monitoring.interceptor.security.protocol=SASL_SSL
consumer.confluent.monitoring.interceptor.ssl.truststore.location=/var/ssl/private/kafka.client.truststore.jks
consumer.confluent.monitoring.interceptor.ssl.truststore.password=test1234
consumer.confluent.monitoring.interceptor.sasl.mechanism=PLAIN
consumer.confluent.monitoring.interceptor.sasl.jaas.config=org.apache.kafka.common.security.plain.PlainLoginModule required \
  username="connect" \
  password="connect-secret";

Note

This is not the full Connect worker configuration. This is just the additional configurations required to enable security on a known working Kafka Connect cluster that is already successfully monitored using Confluent Control Center.

Pass in the properties file when starting each Connect worker.

connect-distributed etc/kafka/connect-distributed.properties

Replicator

Confluent Replicator is a type of Confluent Platform source connector that replicates data from a source to destination Confluent Platform cluster. An embedded consumer inside Replicator consumes data from the source cluster, and an embedded producer inside the Kafka Connect worker produces data to the destination cluster.

Take the basic client security configuration:

security.protocol=SASL_SSL
ssl.truststore.location=/var/ssl/private/kafka.client.truststore.jks
ssl.truststore.password=test1234
sasl.mechanism=PLAIN
sasl.jaas.config=org.apache.kafka.common.security.plain.PlainLoginModule required \
    username="client" \
    password="client-secret";

And configure Replicator for the following:

• Top-level Replicator consumer from the origin cluster, with an additional configuration prefix src.kafka.
• Confluent Monitoring Interceptor consumer from the origin cluster used for Confluent Control Center streams monitoring, with an additional configuration prefix src.consumer.confluent.monitoring.interceptor.

Combining the configuration steps described above, the Replicator JSON properties file contains the following configuration settings:

{
  "name":"replicator",
  "config":{
    ....
    "src.kafka.security.protocol" : "SASL_SSL",
    "src.kafka.ssl.truststore.location" : "var/private/ssl/kafka.server.truststore.jks",
    "src.kafka.ssl.truststore.password" : "test1234",
    "src.kafka.sasl.mechanism" : "PLAIN",
    "src.kafka.sasl.jaas.config" : "org.apache.kafka.common.security.plain.PlainLoginModule required username=\"replicator\" password=\"replicator-secret\";",
    "src.consumer.interceptor.classes": "io.confluent.monitoring.clients.interceptor.MonitoringConsumerInterceptor",
    "src.consumer.confluent.monitoring.interceptor.security.protocol": "SASL_SSL",
    "src.consumer.confluent.monitoring.interceptor.ssl.truststore.location": "/var/ssl/private/kafka.client.truststore.jks",
    "src.consumer.confluent.monitoring.interceptor.ssl.truststore.password": "confluent",
    "src.consumer.confluent.monitoring.interceptor.sasl.mechanism": "PLAIN",
    "src.consumer.confluent.monitoring.interceptor.sasl.jaas.config": "org.apache.kafka.common.security.plain.PlainLoginModule required username="client" password="client-secret";",
    ....
  }
}

Note

This is not the full Replicator configuration. Rather, it shows the additional configurations required to enable security on a known working Replicator connector that is already successfully monitored using Confluent Control Center.

After Kafka Connect is started, you can add the Confluent Replicator:

curl -X POST -H "Content-Type: application/json" --data @replicator_properties.json http://connect:8083/connectors

Confluent Control Center

Confluent Control Center uses Kafka Streams for stream processing, so if all the Confluent Server brokers in the monitoring cluster backing Control Center are secured, then the Control Center application, another Kafka client, also needs to be secured.

Take the basic client security configuration and add the configuration prefix confluent.controlcenter.streams. Make all the following modifications in the etc/confluent-control-center/control-center.properties file:

confluent.controlcenter.streams.security.protocol=SASL_SSL
confluent.controlcenter.streams.ssl.truststore.location=/var/ssl/private/kafka.client.truststore.jks
confluent.controlcenter.streams.ssl.truststore.password=test1234
confluent.controlcenter.streams.sasl.mechanism=PLAIN
confluent.controlcenter.streams.sasl.jaas.config=org.apache.kafka.common.security.plain.PlainLoginModule required \
  username="confluent" \
  password="confluent-secret";

Note

This is not the full Confluent Control Center configuration. Rather, it shows the additional configurations required to enable security on a known working Confluent Control Center deployment.

Start Confluent Control Center.

control-center-start etc/confluent-control-center/control-center.properties

Confluent Metrics Reporter

If you are using Confluent Control Center to monitor your deployment, the Confluent Metrics Reporter is a client as well. If the monitoring cluster backing Confluent Control Center is also configured with the same security protocols, then configure the Confluent Metrics Reporter for security in each broker’s server.properties file. The configuration prefix is confluent.metrics.reporter. and is described above.

Confluent Monitoring Interceptors

Configure security for the components that are using Confluent Monitoring Interceptors to report stream monitoring statistics in Confluent Control Center:

# Embedded producer for streams monitoring with Confluent Control Center
producer.interceptor.classes=io.confluent.monitoring.clients.interceptor.MonitoringProducerInterceptor
producer.confluent.monitoring.interceptor.security.protocol=SASL_SSL
producer.confluent.monitoring.interceptor.ssl.truststore.location=/var/ssl/private/kafka.client.truststore.jks
producer.confluent.monitoring.interceptor.ssl.truststore.password=test1234
producer.confluent.monitoring.interceptor.sasl.mechanism=PLAIN
producer.confluent.monitoring.interceptor.sasl.jaas.config=org.apache.kafka.common.security.plain.PlainLoginModule required username="client" password="client-secret";

# Embedded consumer for streams monitoring with Confluent Control Center
consumer.interceptor.classes=io.confluent.monitoring.clients.interceptor.MonitoringConsumerInterceptor
consumer.confluent.monitoring.interceptor.security.protocol=SASL_SSL
consumer.confluent.monitoring.interceptor.ssl.truststore.location=/var/ssl/private/kafka.client.truststore.jks
consumer.confluent.monitoring.interceptor.ssl.truststore.password=test1234
consumer.confluent.monitoring.interceptor.sasl.mechanism=PLAIN
consumer.confluent.monitoring.interceptor.sasl.jaas.config=org.apache.kafka.common.security.plain.PlainLoginModule required username="client" password="client-secret";

Authorization and ACLs

Use Centralized ACLs to add, remove, or list ACLs when using RBAC. The most common tasks for ACL management are adding or removing a principal as a producer or consumer. For example, to add a client called client-1 as a producer and consumer of a topic called test-topic, execute the following:

confluent iam acl create --allow --principal User:client-1 --operation write --topic test-topic --kafka-cluster <kafka-cluster-id>
confluent iam acl create --allow --principal User:client-1 --operation read --topic test-topic --kafka-cluster <kafka-cluster-id>

For additional Confluent CLI details, refer to the ACL subcommands in confluent iam. If you are not running RBAC, then refer to Use Access Control Lists (ACLs) for Authorization in Confluent Platform.

Troubleshoot

In cases where the configuration does not work on the first attempt, debugging output is a helpful way to diagnose the cause of the problem:

1. Validate the keys and certificates in the keystores and truststores in the Confluent Server brokers and Kafka clients.

   keytool -list -v -keystore /var/ssl/private/kafka.server.keystore.jks
   

2. Enable Kafka authorization logging by modifying the etc/kafka/log4j.properties file. Change the log level to DEBUG, and then restart the Confluent Server brokers.

   log4j.logger.kafka.authorizer.logger=DEBUG, authorizerAppender
   

3. Enable TLS/SSL debug output by using the javax.net.debug system property, which requires a restart of the JVM.

   export KAFKA_OPTS=-Djavax.net.debug=all
   

4. Enable SASL debug output using the sun.security.krb5.debug system property, which requires a restart of the JVM.

   export KAFKA_OPTS=-Dsun.security.krb5.debug=true
   

Next steps

To see a fully secured multi-node cluster, check out the Docker-based Confluent Platform demo. It shows entire configurations, including security-related and non security-related configuration parameters, on all components in Confluent Platform, and the demo’s playbook has a security section for further learning.

Read the documentation for more details about security design and configuration on all components in Confluent Platform. While this tutorial uses the PLAIN mechanism for the SASL examples, Confluent additionally supports GSSAPI (Kerberos) and SCRAM, which are more suitable for production.

We welcome feedback in the Confluent community security channel in Slack!